Integrated design of a robust superhydrophobic cement mortar layer via sizing sand grains
Source abstract
Abstract
Abstract This work reported a facile route for fabricating super-hydrophobic concrete via sizing sand grains. It was found that mixing the sands with a size ranging from 150–180 μm into cement enabled the formation of a lotus-like surface with a papillary structure at micro-scale. SEM showed that the size of bumper was about 3 μm. When spraying a fluorocarbon solution onto this surface, the porous nature of the cement matrix showed the advantage of taking the fluorocarbon into the internal structure of the concrete via capillary force. As a result, the sub surface up to a depth of ∼1.5 mm were transformed into a thick superhydrophobic layer directly. The contact angle (CA) of water droplets could reach 157° on this surface, and which could remain more than 150° after abrasion 100 cycles under a weight of 300 g at 360 grit sandpaper. This thick hydrophobic layer significantly reduced the corrosion rate of the steel the concrete at the Cl- environment by 620 times. The measurement of British pendulum number and compression strength revealed that this superhydrophobic layer was beneficial for maintaining the friction coefficient of the concrete surface in wet condition without altering the mechanical integrity of the concrete.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Aerogels and thermal insulation · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Dynamics of droplet impact on hydrophobic/icephobic concrete with the potential for superhydrophobicity10.1021/la504626f ↗
2. Aqueous epoxy-based superhydrophobic coatings: Fabrication and stability in water10.1016/j.porgcoat.2018.04.012 ↗
3. Deicing salts and durability of concrete pavements and joints: mitigating calcium oxychloride formation
4. Effect of hydrophobic surface treatment on freeze-thaw durability of concrete10.1016/j.cemconcomp.2016.03.001 ↗
5. Anti-icing performance of superhydrophobic surfaces10.1016/j.apsusc.2011.02.057 ↗
6. Dark, heat-reflective, anti-ice rain and superhydrophobic cement concrete surfaces10.1016/j.conbuildmat.2019.05.188 ↗
7. Anti-icing superhydrophobic coatings10.1021/la902882b ↗
8. Verification of icephobic/anti-icing properties of a superhydrophobic surface10.1021/am400429q ↗
9. Facile formation of super-hydrophobic nickel coating on magnesium alloy with improved corrosion resistance10.1016/j.colsurfa.2017.11.055 ↗
10. Diversity of structure, morphology and wetting of plant surfaces10.1039/b804854a ↗
11. Transition between Superhydrophobic States on Rough Surfaces10.1021/la049329e ↗
12. A simple way to an ultra-robust superhydrophobic fabric with mechanical stability, UV durability, and UV shielding property10.1016/j.jcis.2018.03.038 ↗
13. Hydrophobic properties of biofilm-Enriched hybrid mortar10.1002/adma.201602123 ↗
14. Superhydrophobic concrete surfaces with integrated microtexture10.1016/j.cemconcomp.2014.05.010 ↗
15. Self-assembling particle-siloxane coatings for superhydrophobic concrete
16. Superhydrophobic coatings on portland cement concrete surfaces10.1016/j.conbuildmat.2017.03.012 ↗
17. Superhydrophobic concrete with enhanced mechanical robustness: Nanohybrid composites, strengthen mechanism and durability evaluation10.1016/j.conbuildmat.2020.118563 ↗
18. Wettability patterning for high-rate, pumpless fluid transport on open, non-planar microfluidic platforms10.1039/C3LC51406D ↗
19. Ormosils loaded with SiO2 nanoparticles functionalized with Ag as multifunctional superhydrophobic/biocidal/consolidant treatments for buildings conservation10.1088/1361-6528/ab1ff0 ↗
20. Robust superhydrophobic carbon nanotube film with lotus leaf mimetic multiscale hierarchical structures10.1021/acsnano.7b06371 ↗
21. Mimicking natural superhydrophobic surfaces and grasping the wetting process: A review on recent progress in preparing superhydrophobic surfaces10.1016/j.cis.2011.08.005 ↗
22. Inexpensive and non-fluorinated superhydrophobic concrete coating for anti-icing and anti-corrosion10.1016/j.jcis.2019.01.014 ↗
23. Super-robust superhydrophobic concrete10.1039/C7TA03526H ↗
24. ASTM C33/C33M-18 · 2018
25. ASTM E303-93 · 2018
26. ASTM C109/C109M-16a · 2016
27. Laboratory evaluation on water-based and flexible epoxy/SiO2 nanocomposites to enhance anti-sliding effectiveness of pavement10.1088/2053-1591/ab6e83 ↗
28. X-ray diffraction and microstructure studies of gum arabic-cement concrete10.1016/j.conbuildmat.2017.08.162 ↗
29. A review on fundamentals, constraints and fabrication techniques of superhydrophobic coatings10.1016/j.porgcoat.2020.105557 ↗
30. Large-scale preparation of superhydrophobic cerium dioxide nanocomposite coating with UV resistance, mechanical robustness, and anti-corrosion properties10.1016/j.surfcoat.2019.125312 ↗
31. Dual-action smart coatings with a self-healing superhydrophobic surface and anti-corrosion properties10.1039/C6TA10903A ↗
32. Graphene-based polymer nanocomposites as barrier coatings for corrosion protection10.1016/j.porgcoat.2019.05.030 ↗
33. Superhydrophobic composite coating with active corrosion resistance for AZ31B magnesium alloy protection10.1016/j.cej.2018.09.133 ↗
34. Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments10.1016/j.corsci.2015.11.023 ↗