A facile way of controlling capillary condensation: particle-based crystal
Source abstract
Abstract
Abstract To demonstrate a facile method to control capillary condensation via the design of confined geometric structures, we use a particle self-assembly technique to fabricate porous materials with well-defined pore sizes. Four groups of silica particles were synthesized using the modified Stober method, and these groups of particles were then arranged in closely packed structures. Quantitative predictions of capillary condensation were made based on the Kelvin equation and an approximation of the geometric structures of our closely packed samples. Experimental observations revealed that water uptake at 100% relative humidity reached 40%–50% relative to particle mass across sizes, closely aligning with theoretical predictions for small-particle systems, even though the geometry of some of the confined spaces corresponds to distances smaller than 10 nm. Despite deviation from theoretical predictions that are observed in larger particle systems, and which can be attributed primarily to practical limitations of attainable ordered structures at these scales, this fabrication method shows great potential for the creation of devices that allow facile control of capillary condensation in relevant applications such as vapor capture and humidity control.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Phase separation in confined systems10.1088/0034-4885/62/12/201 ↗
2. Physical adsorption characterization of nanoporous materials10.1002/cite.201000064 ↗
3. The role of nanofluids in renewable energy engineering10.3390/nano13192671 ↗
4. Assorted kerosene-based nanofluid across a dual-zone vertical annulus with electroosmosis10.1016/j.heliyon.2023.e15916 ↗
5. Nanofluidic transport governed by the liquid/vapour interface10.1038/nnano.2014.28 ↗
6. Water harvesting from air with metal-organic frameworks powered by natural sunlight10.1126/science.aam874 ↗
7. Response to comment on ‘water harvesting from air with metal-organic frameworks powered by natural sunlight’10.1126/science.aam8743 ↗
8. A review on capillary condensation in nanoporous media: implications for hydrocarbon recovery from tight reservoirs10.1016/j.fuel.2016.06.123 ↗
9. Nanocrack-regulated self-humidifying membranes10.1038/nature17634 ↗
10. Activated desorption at heterogeneous interfaces and long-time kinetics of hydrocarbon recovery from nanoporous media10.1038/ncomms11890 ↗
11. A model for multiple transport mechanisms through nanopores of shale gas reservoirs with real gas effect–adsorption-mechanic coupling10.1016/j.ijheatmasstransfer.2015.10.003 ↗
12. Effect of CQDs doping on the properties of RuO2–TiO2/Ti anode10.1016/j.ceramint.2023.07.019 ↗
13. Water adsorption in porous metal-organic frameworks and related materials10.1021/ja500330a ↗
14. Direct evidence for curvature-dependent surface tension in capillary condensation: Kelvin equation at molecular scale10.1103/PhysRevX.8.041046 ↗
15. Ravikovitch · Characterization of Nanoporous Materials from Adsorption and Desorption Isotherms · 2001 · 187-188 · 1110.1016/S0927-7757(01)00614-8 ↗
16. Capillary condensation in confined media10.1201/9781420075410-19 ↗
17. Liquids at interfaces: what can a theorist contribute?10.1088/0953-8984/2/S/003 ↗
18. Capillary condensation and snap-off in nanoscale contacts10.1021/la0013143 ↗
19. Adsorption and capillary condensation in porous media: liquid retention and interfacial configurations in angular pores10.1029/1999WR900098 ↗
20. Capillary condensation in 8 nm deep channels10.1021/acs.jpclett.7b03003 ↗
21. Capillary condensation under atomic-scale confinement10.1038/s41586-020-2978-1 ↗
22. Application of large pore MCM-41 molecular sieves to improve pore size analysis using nitrogen adsorption measurements10.1021/la970776m ↗
23. Pore size distribution analysis of microporous carbons: a density functional theory approach10.1021/j100120a035 ↗
24. Modeling capillary condensation in cylindrical nanopores: a molecular dynamics study10.1021/la991227e ↗
25. Physical adsorption characterization of nanoporous materials10.1002/cite.201000064 ↗
26. Capillary condensation of adsorbates in porous materials10.1016/j.cis.2011.08.003 ↗
27. Quirke · 2006
28. Dyson · 2008
29. Scanning curves in wedge pore with the wide end closed: Effects of temperature10.1002/aic.14905 ↗
30. Adsorption of n-pentane on mesoporous silica and adsorbent deformation10.1021/la401513n ↗
31. Direct experimental verification of the Kelvin equation for capillary condensation10.1038/277548a0 ↗
32. Direct visualization and molecular simulation of dewpoint pressure of a confined fluid in sub-10 nm slit pores10.1016/j.fuel.2018.08.050 ↗
33. Nucleation and growth of condensate in nanoporous materials10.1039/C5CP00471C ↗
34. Preparation of spherical silica nanoparticles: Stober silica
35. The size dependence of growth rate of monodisperse silica particles from tetraalkoxysilane10.1006/jcis.1997.4809 ↗
36. The role of interparticle and external forces in nanoparticle assembly10.1038/nmat2206 ↗
37. Non-brownian particle-based materials with microscale and nanoscale hierarchy10.1002/anie.201500273 ↗
38. Fabrication and characterization of non-brownian particle-based crystals10.1021/la501511s ↗