Effect of Cu alloying to ZA-24 alloy to corrosion properties in 2.5% NaCl solution
Source abstract
Abstract
Abstract Zinc–aluminium alloys (ZA alloys) are widely used in corrosive environments due to their castability and mechanical properties. In this study, ZA-24 and Cu-alloyed ZA-24 alloys were fabricated via gravity casting to investigate the effect of copper addition on corrosion behaviour in 2.5% NaCl solution. Immersion corrosion tests, electrochemical Tafel analysis, SEM-EDS, XRD, and XPS techniques were employed to characterize the corrosion mechanism. The results indicated that Cu addition increased the micro-galvanic corrosion susceptibility, especially enhancing the specific corrosion rate of Al. However, Cu also promoted the formation of a more stable corrosion film, improving long-term corrosion resistance. These findings highlight the dual role of copper in ZA-24 alloys, suggesting design strategies for enhanced corrosion performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Evolution of atmospheric corrosion of superplastic Zn-Al alloys exposed to an industrial environment10.1002/maco.201408105 ↗
2. The effect of silver on wear behaviour of zinc-aluminium-based ZA-12 alloy produced by gravity casting10.1016/j.matchar.2013.12.015 ↗
3. Corrosion susceptibility of Zn-Al alloys with different grains and dendritic microstructures in Nacl solutions10.1016/j.corsci.2012.03.015 ↗
4. Corrosion investigation of zinc−aluminum alloy matrix (ZA-27) reinforced with alumina (Al2O3) and fly ash,10.1080/02726351.2016.1165321 ↗
5. Investigation of microstructures and anti-corrosion properties of aluminium-zinc alloys10.1002/cjoc.200591182 ↗
6. Effect of thiosulfate on the passivation of zinc-alloys in 3.5 wt% NaCl solution at 353 K,10.1515/mt-2022-0399 ↗
7. Effect of silicon and titanium on the microstructure and mechanical properties of ZA12 alloy10.1016/j.mtcomm.2021.102564 ↗
8. Relationship between cooling rate, microstructure features and wear behavior in end-chill cast Zn-27%Al alloys containing more than 2% Cu10.1016/j.wear.2011.06.014 ↗
9. Effect of alloying elements on atmospheric corrosion behavior of Zinc die casting alloys10.2320/jinstmet.72.337 ↗
10. Corrosion of a zinc-aluminium-copper alloy by fluorine gas10.1016/0167-577X(95)00208-1 ↗
11. A critical review on corrosion and runoff from zinc and zinc-based alloys in atmospheric environments10.5006/2458 ↗
12. Improving corrosion behavior of high-grade Zinc by Aluminum alloying10.1134/S2075113322010129 ↗
13. Investigation of corrosion performance of aluminum and zinc alloys in three acidic media10.1002/eng2.12103 ↗
14. Effect of copper content on the mechanical and sliding wear properties of monotectoid-based zinc-aluminium-copper alloys10.1016/S0301-679X(03)00113-0 ↗
15. improving corrosion behavior of high-grade Zinc by Aluminum alloying10.1134/S2075113322010129 ↗
16. Effect of silicon and titanium on the microstructure and mechanical properties of ZA12 alloy10.1016/j.mtcomm.2021.102564 ↗
17. Production, microstructure and tribological properties Of Zn-Al/Ti Metal–metal composites reinforced with alumina nanoparticles,10.1007/s40962-020-00565-5 ↗
18. Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution10.1016/S1003-6326(16)64257-7 ↗
19. Production, microstructure and tribological properties of Zn-Al/Ti metal–metal composites reinforced with alumina nanoparticles,10.1007/s40962-020-00565-5 ↗
20. Corrosion susceptibility of Zn-Al alloys with different grains and dendritic microstructures in Nacl solutions10.1016/j.corsci.2012.03.015 ↗
21. Phase equilibria of the ternary Al-Cu-Zn Alloys on Al-Zn rich side10.1007/s11669-018-0640-5 ↗
22. Study on corrosion mechanism of Al–Zn coatings in the simulated polluted marine atmosphere10.1016/j.jmrt.2023.07.091 ↗
23. Passivity and passivity breakdown of Al and Al-Zn alloys in SCN- solutions and the effect of some inorganic inhibitors - Galvanostatic, potentiostatic and ICP-AES studies10.1016/j.arabjc.2010.06.028 ↗
24. Chemistry of corrosion products on Zn-Al-Mg alloy coated steel10.1016/j.corsci.2010.05.044 ↗