journal article·2025-06-01Open access

Synergistic improvement of strength and elongation of Zn-Mg alloys as orthopedic implants through ECAP

Yang Xu, Yu Cai, Tuquan Zheng, Long Zhang, Zhao Li, Jin Xiao, Haozhen Xie

Materials Research Express· Volume 12· Issue 6

Abstract

Abstract The Zn-1.47 wt% Mg alloy achieved a superior combination of tensile strength (399 MPa) and elongation (19.5%) through complete refinement of its eutectic structure via equal-channel angular pressing (ECAP). Microstructural analysis revealed that this enhancement was driven by two key mechanisms: (1) dynamic recrystallization (DRX), which significantly reduced grain size, and (2) the formation of needle-like and particle-like precipitates within Zn grains, contributing to grain boundary and precipitation strengthening. Notably, ECAP at 250 °C and then at 150 °C proved more effective than direct deformation at 150 °C in achieving full refinement of eutectic structure. The fragmented eutectic structure not only enhanced strength through second-phase strengthening but also improved ductility by minimizing stress concentration. Furthermore, the refined microstructure led to improved corrosion resistance, with reduced susceptibility to localized corrosion. Compared to pure Ti, the ECAP-processed Zn-Mg alloys demonstrated superior biocompatibility and osteogenic potential, making them promising candidates for orthopedic implant applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications10.1038/s41467-019-14153-7 ↗
2. Zn-0.4Li alloy shows great potential for the fixation and healing of bone fractures at load-bearing sites10.1016/j.cej.2021.129317 ↗
3. Microstructural control of Zn alloy by melt spinning - a novel approach towards fabrication of advanced biodegradable biomedical materials10.1016/j.msea.2025.148347 ↗
4. Transition metals in angiogenesis—a narrative review10.1016/j.mtbio.2023.100757 ↗
5. Exosomes derived from macrophages upon Zn ion stimulation promote osteoblast and endothelial cell functions10.1039/D1TB00112D ↗
6. Effect of strain on degradation behaviors of WE43, Fe and Zn wires10.1016/j.actbio.2020.06.028 ↗
7. Fundamental theory of biodegradable metals—definition, criteria, and design10.1002/adfm.201805402 ↗
8. Zinc subjected to plastic deformation by complex loading and conventional extrusion: comparison of the microstructure and mechanical properties10.1016/j.matdes.2016.12.056 ↗
9. Mechanical response of high purity Zn wires with different diameters10.1016/j.matlet.2022.132635 ↗
10. On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion10.1016/j.msea.2012.11.027 ↗
11. Tensile deformation and fracture behaviors of high purity polycrystalline zinc10.1016/j.msea.2008.01.004 ↗
12. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
13. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
14. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
15. . Femur bone implant plate design analysis under varying fracture conditions
16. Material synthesis and design optimization of biomaterials for biomedical implant applications
17. Magnesium based alloys for biodegradable implants applications using additive manufacturing technique: a review10.1142/S0219519422500427 ↗
18. Selection and preparation strategies of Mg-alloys and other biodegradable materials for orthopaedic applications: a review10.1016/j.mtcomm.2022.103658 ↗
19. Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr10.1038/srep10719 ↗
20. Systematic in vitro and in vivo study on biodegradable binary Zn-0.2 at% rare earth alloys (Zn-RE: Sc, Y, La–Nd, Sm–Lu)10.1016/j.bioactmat.2023.01.004 ↗
21. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
22. Effect of grain refinement on tensile properties of cast zinc alloys10.1007/s11661-015-3229-1 ↗
23. Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material10.1016/j.matdes.2015.06.181 ↗
24. Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation10.1016/j.msec.2017.11.021 ↗
25. Effect of Mg content on the microstructure, texture, and mechanical performance of hypoeutectic extruded Zn-Mg alloys10.1016/j.jallcom.2024.177155 ↗
26. Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion10.1016/j.msea.2023.146027 ↗
27. In vivo biocompatibility and degradability of a Zn-Mg-Fe alloy osteosynthesis system10.1016/j.bioactmat.2021.05.012 ↗
28. An adaptive biodegradable zinc alloy with bidirectional regulation of bone homeostasis for treating fractures and aged bone defects10.1016/j.bioactmat.2024.04.027 ↗
29. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys10.1016/j.msec.2015.08.015 ↗
30. Microstructure, mechanical properties and fracture behavior of as-extruded Zn–Mg binary alloys10.1007/s40195-017-0585-4 ↗
31. Near-eutectic Zn-Mg alloys: interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties10.1016/j.cap.2019.02.013 ↗
32. A high strength and ductility Zn–Cu–Mg alloy achieved by bandlike distribution of ultra-fine CuZn5 and Mg2Zn11 particles10.1016/j.msea.2022.143584 ↗
33. Evolution of Mg–Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt%) alloys10.1016/j.jallcom.2019.151987 ↗
34. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
35. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
36. Effect of equal-channel angular pressing on microstructural evolution, mechanical property and biodegradability of an ultrafine-grained zinc alloy10.1016/j.msea.2021.141857 ↗
37. Achieving high strength, excellent ductility, and suitable biodegradability in a Zn-0.1Mg alloy using room-temperature ECAP10.1016/j.jallcom.2022.166906 ↗
38. Improving the mechanical properties and inhibiting strain softening behavior of the biodegradable Zn-0.06Mg alloy via ECAP plus rolling processing10.1016/j.pnsc.2024.01.015 ↗
39. Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants10.1016/j.jksus.2017.07.008 ↗
40. Influence of magnesium addition on microstructural and mechanical stability of hydrostatically extruded biodegradable zinc alloys10.1016/j.bioactmat.2024.09.028 ↗
41. Structural and mechanical aspects of hypoeutectic Zn-Mg binary alloys for biodegradable vascular stent applications10.1016/j.bioactmat.2020.07.004 ↗
42. High-pressure torsion processing of Zn–3Mg alloy and its hybrid counterpart: a comparative study10.1016/j.jallcom.2020.154891 ↗
43. A high-strength and high-ductility Zn–Ag alloy achieved through trace Mg addition and ECAP10.1016/j.msea.2023.145381 ↗
44. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals10.1016/j.actbio.2022.01.049 ↗
45. Grain refinement of cast zinc through magnesium inoculation: characterisation and mechanism10.1016/j.matchar.2015.05.011 ↗
46. Crystal structure and stability of phases in Mg-Zn alloys: a comprehensive first-principles study10.1016/j.actamat.2022.118443 ↗
47. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
48. Nanoparticle-enabled Zn-0.1Mg alloy with long-term stability, refined degradation, and favorable biocompatibility for biodegradable implant devices10.1021/acsami.4c04714 ↗
49. Material–structure–function integrated additive manufacturing of degradable metallic bone implants for load-bearing applications10.1002/adfm.202213128 ↗
50. Developing high elongation of Ca-containing Zn alloys with superior osteogenic and antibacterial properties10.1016/j.jallcom.2024.176988 ↗
51. Quantification of precipitate hardening of twin nucleation and growth in Mg and Mg-5Zn using micro-pillar compression10.1016/j.actamat.2018.10.009 ↗
52. 380 MPa-30% grade biodegradable Zn-Mn-Mg-Ca alloy: bimodal grain structure, large work-hardening strain, and enhanced biocompatibility10.1016/j.actbio.2024.12.050 ↗
53. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
54. Biodegradable Mg alloys for orthopedic implants—a review10.1016/j.jma.2021.06.024 ↗
55. Zn0.8Li0.1Sr-a biodegradable metal with high mechanical strength comparable to pure Ti for the treatment of osteoporotic bone fractures: in vitro and in vivo studies10.1016/j.biomaterials.2021.120905 ↗
56. High-strength biodegradable zinc alloy implants with antibacterial and osteogenic properties for the treatment of MRSA-induced rat osteomyelitis10.1016/j.biomaterials.2022.121663 ↗