Evaluation of Intermediate Annealing on Nb-Stabilized Ferritic Stainless Steel
Source abstract
Abstract
This study seeks to evaluate the effect of intermediate annealing on the microstructure, texture, and formability of Nb-stabilized ferritic stainless steel. Two routes - direct cold rolling and cold rolling with an intermediate annealing were performed. The total reduction was 80%, 3-0.6 mm and 3-1.2-0.6 mm. The characterization of the samples was conducted using X-ray diffraction, electron backscatter diffraction, and tensile tests to evaluate the formability by the average normal anisotropy coefficient, r value. The results showed that intermediate annealing promoted the strongest γ-fiber with peak at {111}〈112〉 and weak α-fiber after cold rolling. After the final annealing, it was observed that intermediate annealing reduces the banded microstructure and θ-fiber, and improves the γ-fiber uniformity and the r value. It is worth noting that the γ-fiber fraction was the same for direct reduction. The increase in r value was related to the reduction in θ-fiber and the uniformity of texture recrystallization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Minas Gerais, Brazil
Aperam South America Research Center, Brazil
References (28)
Show source-provided references
1. Texture Development and Formability of Strip Cast 17% Cr Ferritic Stainless Steel10.2355/isijinternational.49.890 ↗
2. Microstructure and texture of Nb + Ti stabilized ferritic stainless steel10.1016/j.matchar.2008.03.018 ↗
3. Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel10.1016/j.matdes.2016.05.100 ↗
4. Recrystallization of niobium stabilized ferritic stainless steel during hot rolling simulation by torsion tests10.1016/j.jmrt.2015.07.003 ↗
5. Texture evolution in Nb-containing ferritic stainless steels during secondary recrystallization10.1016/j.msea.2008.07.002 ↗
6. Effect of Texture Components on the Lankford Parameters in Ferritic Stainless Steel Sheets10.2355/isijinternational.52.522 ↗
7. Effect of intermediate annealing on texture, formability and ridging of 17%Cr ferritic stainless steel sheet10.1016/S0921-5093(00)01995-X ↗
8. Effect of two-step cold rolling and annealing on texture, grain boundary character distribution and r-value of Nb+Ti stabilized ferritic stainless steel10.1016/j.matchar.2008.05.006 ↗
9. Influence of the Cold Rolling and Annealing Sequence on the Ridging Behaviour of Ti-Stabilized 18% Cr Ferritic Stainless Steel10.1002/srin.201000125 ↗
10. Development of y-fibre recrystallisation texture in medium-chromium ferritic stainless steels10.1179/1743284713Y.0000000462 ↗
11. Development of ferritic stainless steel sheets with excellent deep drawability by {1 1 1} recrystallization texture control10.1016/S0389-4304(03)00082-1 ↗
12. Effect of Texture on r-value of Ferritic Stainless Steel Sheets10.2355/isijinternational.51.1740 ↗
13. Bunge HJ · 1982
14. Raabe D · 330
15. Textures of ferritic stainless steels10.1179/mst.1993.9.4.302 ↗
16. Fundamental Aspect of Texture Formation in Low Carbon Steel10.2355/isijinternational.34.313 ↗
17. Cold rolling and annealing textures in low carbon and extra low carbon steels10.1179/imr.1994.39.4.129 ↗
18. Deformation microstructures and textures in steels.10.1098/rsta.1999.0385 ↗
19. Microstructure, Texture, and Deep Drawability Under Two Different Cold-Rolling Processes in Ferritic Stainless Steel10.1007/s11665-015-1689-5 ↗
20. Effect of Heating Rate on the Development of Annealing Texture in Nonoriented Electrical Steels10.2355/isijinternational.43.1611 ↗
21. Abbaschian R · 2009
22. Humphreys FJ · 2004
23. Current issues in recrystallization: A review10.1016/S0921-5093(97)00424-3 ↗
24. Microstructure, Texture, and Formability of Nb+Ti Stabilized High Purity Ferritic Stainless Steel10.1016/S1006-706X(10)60113-6 ↗
25. Evolution of Through-Thickness Texture in Ultra Purified 17% Cr Ferritic Stainless Steels10.1016/S1006-706X(13)60079-5 ↗
26. Effect of Through-Thickness Macro and Micro-Texture Gradients on Ridging Of 17%Cr Ferritic Stainless Steel Sheet10.1002/srin.200506098 ↗
27. Texture evolution and formability under different hot rolling conditions in ultra purified 17%Cr ferritic stainless steels10.1016/j.matchar.2012.09.006 ↗
28. Development and control of annealing textures in low-carbon steels