A Simple Method for Low-temperature Sintering of Titania
Source abstract
Abstract
A low-temperature sintering process was used to produce pellets at different temperatures using TiO2 anatase (Vetec) and P25 (Evonik) commercial powders. The initial powder was mixed with 75% acetic acid aqueous solution and pressed under 375 MPa. The temperature was applied after the pelletization in a conventional furnace for 4 hours. The best sintering temperature for anatase was 800°C, which is higher than typical cold sintering temperatures but below conventional ones. However, the optimal temperature was 450 °C for P25 due to its density and SEM results. The sintered pellets' maximum densities were 70% (anatase, 800oC) and 66% (P25, 450oC). It was not possible to measure the anatase pellets treated under 800oC because they disintegrated in water. This work studied the effects of the applied pressure, solvent concentration, particle size, and sintering temperature on the properties of sintered pellets, such as integrity, density, and presence of porous. It also evaluated the electrochemical activity measured by cyclic voltammetry (CV), which indicated that the sintered TiO2 pellets are porous with a partial capacitive response.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Thermal and Kinetic Analysis · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Pontifícia Universidade Católica, Brasil
Pontifícia Universidade Católica do Rio de Janeiro, Brasil
References (54)
Show source-provided references
1. Morales J · 2016
2. A continuous flow packed bed photocatalytic reactor for the destruction of 2-methylisoborneol and geosmin utilising pelletised TiO210.1016/j.cej.2013.09.041 ↗
3. Rethinking nano-TiO2 safety: overview of toxic effects in humans and aquatic animals
4. Titanium dioxide in our everyday life; Is it safe?10.2478/v10019-011-0037-0 ↗
5. Anatase TiO2 powder immobilized on reticulated Al2O3 ceramics as a photocatalyst for degradation of RO16 azo dye10.1016/j.ceramint.2019.12.098 ↗
6. Microfluidic cell with a TiO2 -modified gold electrode irradiated by an UV-LED for in situ photocatalytic decomposition of organic matter and its potentiality for voltammetric analysis of metal ions10.1016/j.elecom.2006.10.014 ↗
7. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics10.1111/jace.14617 ↗
8. Nano-to-macroporous TiO2 (anatase) by cold sintering process10.1016/j.jeurceramsoc.2019.02.047 ↗
9. Hydrothermal-assisted cold sintering process: a new guidance for low-temperature ceramic sintering10.1021/acsami.6b07481 ↗
10. Comparing hydrothermal sintering and cold sintering process: mechanisms, microstructure, kinetics and chemistry10.1016/j.jeurceramsoc.2019.11.049 ↗
11. Cold sintering process: a new era for ceramic packaging and microwave device development10.1111/jace.14603 ↗
12. Cold sintering : current status and prospects10.1557/jmr.2017.262 ↗
13. Cold sintering: progress, challenges, and future opportunities10.1146/annurev-matsci-070218-010041 ↗
14. A review of cold sintering processes10.1080/17436753.2019.1706825 ↗
15. Cold sintering: a paradigm shift for processing and integration of ceramics10.1002/anie.201605443 ↗
16. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
17. Microwave-assisted synthesis of anatase-TiO2 nanoparticles with catalytic activity in oxygen reduction10.1016/j.jelechem.2017.04.004 ↗
18. A practical beginner’s guide to cyclic voltammetry10.1021/acs.jchemed.7b00361 ↗
19. Low-energy microwave synthesis and cold sintering of nanograined TiO2-Nb2O5
20. Profex: a graphical user interface for the Rietveld refinement program BGMN10.1107/S1600576715014685 ↗
21. The “state of the art” of the diffraction analysis of crystallite size and lattice strain10.1524/zkri.2008.1213 ↗
22. Fundamental parameters approach in the Rietveld method: a study of the stability of results versus the accuracy of the instrumental profile10.1016/S0955-2219(00)00056-X ↗
23. The Scherrer equation and the dynamical theory of X-ray diffraction10.1107/S205327331600365X ↗
24. Particle density determination of pellets and briquettes10.1016/j.biombioe.2006.06.006 ↗
25. Factors that affect protein adsorption on nanostructured titania films. a novel spectroelectrochemical application to sensing10.1021/la010309b ↗
26. Martins PRN de A · 2018
27. Cullity BD · 1978
28. R factors in Rietveld analysis: how good is good enough?10.1154/1.2179804 ↗
29. The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy10.1016/j.jmatprotec.2009.04.007 ↗
30. Enhancement of photocatalytic decarboxylation on TiO2 by water-induced change in adsorption-mode
31. Reduced graphene oxide–P25 nanocomposites as efficient photocatalysts for degradation of bisphenol A in water10.3390/catal9070607 ↗
32. N-doped carbon quantum dots/TiO2 composite with improved photocatalytic activity10.1016/j.apcatb.2016.04.016 ↗
33. Multisite luminescence of rare earth doped TiO2 anatase nanoparticles10.1016/j.matchemphys.2012.06.016 ↗
34. Synergistic effects of acetic acid and nitric acid in water-based sol–gel synthesis of crystalline TiO2 nanoparticles at 25 °C10.1007/s10853-021-06372-5 ↗
35. Novel and facile synthesis of transparent-monolithic TiO2 gels by sol-gel method based on an esterification reaction10.1515/msp-2016-0091 ↗
36. Hydrolysis of titanium alkoxides: modification of the molecular precursor by acetic acid10.1016/S0022-3093(87)80333-2 ↗
37. Synthesis of oxygenated fuel additives via glycerol esterification with acetic acid over bio-derived carbon catalyst10.1016/j.fuel.2017.08.024 ↗
38. Mesoporous nanocrystalline TiO2 supported metal (Cu, Co, Ni, Pd, Zn, and Sn) catalysts: effect of metal-support interactions on steam reforming of methanol10.1016/j.molcata.2015.07.023 ↗
39. Temperature programmed desorption study of water adsorbed on metal oxides. I. Anatase and rutile10.1246/bcsj.51.3144 ↗
40. Re-examination of characteristic FTIR spectrum of secondary layer in bilayer oleic acid-coated Fe3O4 nanoparticles10.1016/j.apsusc.2009.11.079 ↗
41. Recent developments in the Inorganic Crystal Structure Database: theoretical crystal structure data and related features10.1107/S160057671900997X ↗
42. Askeland DR · 2010
43. A review of TiO2 nanoparticles10.1007/s11434-011-4476-1 ↗
44. Cold sintering process: a novel technique for low-temperature ceramic processing of ferroelectrics10.1111/jace.14554 ↗
45. Low temperature synthesis of mixed phase titania nanoparticles with high yield, its mechanism and enhanced photoactivity10.1590/1980-5373-MR-2015-0692 ↗
46. Spectroscopy of conduction band electrons in transparent metal oxide semiconductor films: optical determination of the flatband potential of colloidal titanium dioxide films10.1021/j100193a062 ↗
47. Characteristics of the voltammetric behavior of the hydroxide ion oxidation at disordered mesoporous titanium dioxide electrocatalyst10.1016/j.jscs.2021.101274 ↗
48. Synthesis of titanium dioxide nanostructures by solvothermal method and their application in preparation of nanocomposite based on graphene10.1007/s10853-015-9491-1 ↗
49. Cyclic voltammetry studies of nanoporous semiconductors: capacitive and reactive properties of nanocrystalline TiO2 electrodes in aqueous electrolyte10.1021/jp0265182 ↗
50. Cyclic voltammetry measurements of electroactive surface area of porous nickel: peak current and peak charge methods and diffusion layer effect10.1016/j.matchemphys.2019.05.034 ↗
51. Hydrogenation of nano-structured TiO2 photocatalyst through an electrochemical method10.1166/jnn.2015.8888 ↗
52. Hydrogenation synthesis of blue TiO2 for high-performance lithium- ion batteries10.1021/jp501819p ↗
53. Highly enhanced photoactivity of anatase TiO2 nanocrystals by controlled hydrogenation-induced surface defects10.1021/cs4005776 ↗
54. Urbach rule in solid state physics