Effect of Solid-State Preparation on the Morphology and Properties of PEG-Modified UHMWPE
Source abstract
Abstract
In this study, two solid-state preparations were proposed for ultra high molecular weight polyethylene (UHMWPE) modified by the polyethylene glycol (PEG). Some samples were grinding in a high-energy mill and the other in a ceramic jar mill (CJM). The objective of this work is to investigate the lubricating effect of PEG on UHMWPE through mechanical milling to evaluate the homogenization and properties of the resulting material. The mixtures in the CJM presented a more uniform morphology. These compositions showed increases in crystallinity greater than 22%, attributed to the molecular mobility caused by the lubricating effect of PEG. Besides, it exhibited positive thermodynamic parameters, indicating that the path to decomposition was non-spontaneous and unfavorable, and greater thermal stability than UHMWPE. Furthermore, the compositions prepared using CJM were more crystalline, tougher, more fracture resistant, and had higher deformation to failure than UHMWPE. Therefore, CJM serving as a method alternative to melting the UHMWPE together with PEG in the solid-state with improvements in mechanical and thermal properties at an excellent cost-benefit ratio.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Tribology and Wear Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal da Paraíba, Brasil
Universidade Federal da Paraíba, Brasil; Universidade Federal da Paraíba, Brasil
References (40)
Show source-provided references
1. Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization10.1016/j.polymer.2014.07.050 ↗
2. An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures10.1002/app.50245 ↗
3. Vitamin E effects on the wear resistance of UHMWPE sheets against an EBM-produced Ti6Al4V pin10.1016/j.matlet.2023.135602 ↗
4. Structural modification of UHMWPE fiber through hybridization and CNT reinforcement for ballistic applications10.1002/app.54035 ↗
5. In-reactor blends based on ultrahigh molecular weight polyethylene: effect of microstructure of modifying fraction on the morphology and viscoelastic behavior of blends10.1002/app.52000 ↗
6. Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends10.1515/polyeng-2012-0142 ↗
7. Nanostructure evolution of isotropic high-pressure injection-molded UHMWPEMWPE during heating10.1021/ma0115040 ↗
8. A comparison between mechanical properties of UHMWPEMWPE from ram extrusion process and UHMWPE from compression molding process for a hip joint liner
9. Evaluation of the mechanical and thermal properties of blended (HDPE/UHMWPE) nanocomposites with graphite nanosheets (GNS)
10. Viscoelastic properties correlations to morphological and mechanical response of HDPE/UHMWPE blends10.1007/s10965-014-0482-8 ↗
11. Morphology and mechanical properties of injection-molded ultrahigh molecular weight polyethylene/polypropylene blends and comparison with compression molding10.1002/app.29036 ↗
12. Influence of poly(ethylene glycol)-containing additives on extrusion of ultrahigh molecular weight polyethylene/polypropylene blend10.1002/app.23510 ↗
13. Mechanical properties of an ultrahigh-molecular-weight polyethylene/polypropylene blend containing poly (ethylene glycol) additives10.1002/app.27919 ↗
14. Rheological and mechanical properties of ultrahigh molecular weight polyethylene/high density polyethylene/polyethylene glycol blends
15. Mechanical, rheological, and bioactivity properties of ultra high-molecular-weight polyethylene bioactive composites containing polyethylene glycol and hydroxyapatite10.4028/www.scientific.net/KEM.471-472.827 ↗
16. Effects of maleic anhydride grafted polyethylene on rheological, thermal, and mechanical properties of ultra high molecular weigh polyethylene/poly(ethylene glycol) blends10.1002/app.42701 ↗
17. Preparation of UHMWPE/MMT nanocomposites via mechanical alloying10.4028/www.scientific.net/MSF.727-728.1775 ↗
18. Fabrication of polymer nanocomposites via ball milling: present status and future perspectives10.1016/j.pmatsci.2017.01.003 ↗
19. Fabrication of a novel polyethylene/starch blend through mediation of a high-energy ball milling process: mechanical properties and formation mechanism10.1002/app.38155 ↗
20. Synthesis, spectroscopic, thermodynamics and kinetics analysis study of novel polymers containing various azo chromophore10.1038/s41598-019-57264-3 ↗
21. The evaluation of kinetic parameters for cadmium doped Co-Zn ferrite using thermogravimetric analysis
22. Dynamic thermal decomposition of blends of polyamide 6 with functionalized and non-functionalized PP10.1016/S0141-3910(99)00160-3 ↗
23. Synthesis, characterization, thermodynamics and thermal degradation kinetics of imine-linked polymers10.1007/s10965-020-02317-9 ↗
24. 1990
25. Study on processing of ultrahigh molecular weight polyethylene/polypropylene blends10.1002/app.20679 ↗
26. Effect of polyethylene glycol on the performance of ultrahigh-molecular-weight polyethylene membranes10.1002/app.30500 ↗
27. Conversion prediction in high conversion free-radical polymerizations10.1002/pen.760221208 ↗
28. A criterion for craze formation10.1002/pen.760221207 ↗
29. Effect of solid-state shear milling on structure and properties of HDPE/UHMWPE blends10.1002/app.39916 ↗
30. Study of thermal decomposition parameters of UHMWPE sheet10.1016/j.matpr.2022.04.1016 ↗
31. Non-isothermal kinetics of degradation of ultra-high molecular mass polyethene composite materials: part I. Composite materials with fiber monocrystals10.1007/s10973-007-8324-0 ↗
32. Thermal performances of UHMWPE/BN composites obtained from different blending methods10.1155/2019/8687450 ↗
33. Thermal behavior and decomposition kinetic studies of biomedical UHMWPE/vitamin C compounds10.1007/s10973-018-7321-9 ↗
34. Optimization of compression parameters of UHMWPE through thermal stability10.1016/j.matchemphys.2023.128220 ↗
35. Evaluation of agricultural residues pyrolysis under non-isothermal conditions: thermal behaviors, kinetics, and thermodynamics10.1016/j.biortech.2017.05.036 ↗
36. Potential of macauba endocarp (Acrocomia aculeate) for bioenergy production: multi-component kinetic study and estimation of thermodynamic parameters of activation
37. Entropy-driven ultratough blends from brittle polymers10.1021/acsmacrolett.0c00844 ↗
38. Non-isothermal thermogravimetric degradation kinetics, reaction models and thermodynamic parameters of vinylidene fluoride based fluorinated polymers10.1080/00222348.2019.1679986 ↗
39. Preexponential factors for solid-state thermal decomposition10.1021/j100852a052 ↗
40. Effect of high-energy ball milling on the structure and mechanical properties of ultra-high molecular weight polyethylene10.1002/app.39457 ↗