journal article·2023Open access

Fatigue Behavior of the Al-5wt%Si-2.5wt%Cu alloy produced by Combining Grain Refining Techniques: Electromagnetic Stirring with Al-5wt%Ti-1wt%B

Wendel L. Beil, Gabriela L. Brollo, Cristiano Cardoso, Eugênio J. Zoqui

Materials Research· Volume 26· Issue suppl 1

Abstract

This article studies the fatigue behavior of the Al-5wt%Si-2.5wt%Cu alloy. The effect of combining techniques of chemical grain refining (Al-5wt%Ti-1wt%B alloy) added to electromagnetic stirring, CGR+EMS, is demonstrated in this work. This combination produced a microstructure with reduced grain size (121 ± 20 µm) when compared with the raw material produced only by electromagnetic stirring, EMS, (213 ± 38µm), with grain refiner Only, CGR, (184 ± 23 µm) or Without any Grain Refining Technique (WGRT) (413 ± 96 µm). The condition produced by associating electromagnetic stirring with the Al-5wt%Ti-1wt%B grain refiner presented the smallest grain size and less porosity. Thus, conditions CGR+EMS and WGRT were chosen to continue the evaluation of the mechanical performance of the studied alloy via tensile tests, whose results for ultimate tensile stress, yield strength and elongation were, respectively, WGRT/ CGR+EMS, UTS = 160.3 ± 9.5 / 208 ± 10 MPa, YS (0.2%) = 110 ± 2 / 135 ± 3.5 MPa and ε(%) =3.2 ± 0.1 / 2.9 ± 0.1. Fatigue tests were conducted via the staircase method. The average estimate of fatigue strength for a given life (107 cycles) and the standard deviation calculated for WGRT and CGR+EMS condition were, respectively, μ^y = 60.1 MPa / 71.6 MPa and σ^y= 3.30 / 6.42.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Federal de Educação, Ciência e Tecnologia de São Paulo, Brasil

Serviço Nacional de Aprendizagem Industrial, Brasil

Universidade Estadual de Campinas, Brasil

References (34)

Show source-provided references
1. Dieter GE · 1981
2. Dowling N · 2018
3. The effect of grain size on fadigue crack growth in an aluminium magnesium alloy10.1111/j.1460-2695.1995.tb00861.x ↗
4. Effect of grain size on the fatigue crack growth behavior of 2524-T3 aluminum Alloy10.1016/j.acme.2016.01.004 ↗
5. Effect of the heterogeneous nucleation of the primary α-Al grain via the Al-4Nb-0.5B master alloy in Al-Si alloys with high Fe content
6. A review on grain refinement of aluminum alloys: progresses, challenges and prospects10.1007/s40195-017-0565-8 ↗
7. Effects of stirring time and cooling rate on the rheocast microstructure and mechanical properties of magnesium alloy MRI 230D10.1590/1980-5373-mr-2020-0482 ↗
8. Continuous casting device with electromagnetic stirring for production of SSM feedstock using Al-Si alloys
9. Microstructural evolution in AlMgSi alloys during solidification under electromagnetic stirring10.3390/met7030089 ↗
10. Effect of rotating magnetic field on microstructure in AlCuSi alloys10.3390/met11111804 ↗
11. Dobatkin VI · 1996 · 193
12. Efeitos da agitação mecânica e de adição de refinador de grão na microestrutura e propriedade mecânica de fundidos da liga Al-Sn
13. Microstructure and mechanical behaviour of as cast and hot extruded AlZnMgCu alloy with rare earth erbium additions
14. Kord S · 2018 · 441
15. A comparison between anodizing and EBSD techniques for primary particle size measurement10.3390/met9050488 ↗
16. 2013
17. 2021
18. Agostinho OL · 2014
19. Pore characterization in a model cast aluminum alloy and its quantitative relation to fadigue life studied by syncrotron X-Ray microtomography10.4028/www.scientific.net/MSF.331-337.197 ↗
20. Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys10.1016/j.jmapro.2020.04.071 ↗
21. A review study on the main sources of porosity in Al-Si cast alloys10.1155/2021/1921603 ↗
22. Porosity and the fadigue behaviour of hypoeutectic and hypereutectic Aluminum-silicon casting alloys10.1016/j.ijfatigue.2007.08.012 ↗
23. Monroe R · 2005 · 1
24. Effects of pouring temperature and electromagnetic stirring on porosity and mechanical properties of A357 aluminum Alloy rheo-diecasting10.1007/s11665-018-3310-1 ↗
25. Kaulfman JG · 2004
26. A method for obtaining and analyzing sensitivity data10.1080/01621459.1948.10483254 ↗
27. Fachinni CA · 2019
28. Effect of strain states during cold rolling on the recrystallized grain size in an aluminum alloy10.1016/j.scriptamat.2007.10.049 ↗
29. González-Velásquez JL · 2018
30. The effect of porosity on fatigue of die cast AM6010.1007/s11661-016-3511-x ↗
31. Porosity formation and fadigue properties of AlSiCu cast alloy10.1051/matecconf/201815707003 ↗
32. The effect of the β-Al5FeSi phases on microstructure, mechanical and fatigue properties in A356.0 cast alloys with higher Fe content without additional alloying of Mn10.3390/ma14081943 ↗
33. Effect of Fe-content on fatigue crack initiation and propagation in a cast aluminum-silicon alloy (A356-T6)10.1016/S0921-5093(04)00964-5 ↗
34. Campbell FC · 2008