journal article·2026Open access

Evaluation of Electrochemical Corrosion Behavior of WC-Ni-Al and WC-Co Cemented Carbides

Flávio Amaury de Freitas Matos, Edmilson Otoni Corrêa, Nádia Alves Nery Balbino, Danilo Roque Huanca

Materials Research· Volume 29

Abstract

WC-Co cemented carbide exhibits remarkable mechanical properties, with applications in several engineering areas. However, its high cost, toxicity, and the search for cemented carbides with greater corrosion resistance have led to a demand for an alternative binder phase. In this study, the corrosion behavior of WC–NiAl cemented carbide (90 wt.% WC, 9.5 wt.% Ni, and 0.5 wt.% Al), processed by conventional powder metallurgy, was compared with that of conventional WC–Co cemented carbide in a 3.5 wt.% NaCl solution. The samples were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction before and after corrosion tests. In the electrochemical tests—open circuit potential, linear potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)—the sample with nickel and aluminum binder exhibited more noble potentials, lower current density values, and higher total impedance than the sample with the cobalt binder.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Itajubá, Brasil

References (40)

Show source-provided references
1. Santos JN · 1990
2. Pinto GB · 2008
3. Effect of high energy milling on the microstruture and properties of Wc-Ni composite10.1590/S1516-14392010000300004 ↗
4. The effect of cr3C2 and TaC additives on microstructure, hardness and fracture toughness of WC-6Co tool material fabricated by spark plasma sintering10.1590/1980-5373-mr-2016-0889 ↗
5. Various causes of wear of cemented carbide rings applied to water pump seals
6. A comparison between cemented carbides containing cobalt- and nickel-based binders
7. Electrochemical behaviour of tungsten-carbide hardmetals10.1016/0921-5093(95)10137-3 ↗
8. Exposure effects of alkaline drilling fluid on the microscale abrasion-corrosion of WC-based hardmetals10.1016/j.wear.2006.12.047 ↗
9. Anodic polarization and corrosion of cemented carbides with cobalt and nickel binders10.1007/BF01153988 ↗
10. Kaefer LF · 2004
11. Marques BJJ · 2010
12. Desenvolvimento de metais duros WC-Ni-Si para aplicações de engenharia
13. Gutiérrez JAE · 2002
14. Corrosion behaviour of WC hardmetals with nickel-based binders10.1016/j.corsci.2018.11.015 ↗
15. Influence of different binders and severe environmental conditions on the tribological and electrochemical behaviour of WC-based composites10.3390/lubricants10070145 ↗
16. Corrosion Behavior of WC–10 wt % Ni3Al Composite in Acidic Media10.3103/S106345761905006X ↗
17. Microstructure and mechanical properties of WC-Ni-Al based cemented carbides developed for engineering applications10.3139/146.110593 ↗
18. Bezerra RM · 1999
19. Milheiro FAC · 2006
20. Effect of adding method of Cr on microstructure and properties of WC–9Ni–2Cr cemented carbides10.1016/j.ijrmhm.2012.11.010 ↗
21. Liberto RCN · 2004
22. Fernandes CMS · 2002
23. Investigation of the corrosion behavior of WC–FeAl–B composites in aqueous media10.1016/j.ijrmhm.2012.04.005 ↗
24. Comparative study of corrosion behaviors of WC-NiMo and WC-Co cemented carbides10.3390/ma16124480 ↗
25. The relationship between electrochemical behaviour and in-service corrosion of WC based cemented carbides10.1016/S0263-4368(96)00014-5 ↗
26. Electrochemical corrosion behavior of hot-pressing sintered WC-Al2O3 composite in alkaline and acidic solutions10.1007/s10853-020-05521-6 ↗
27. Corrosion and wear behavior of laser cladded Ni–WC coatings10.1016/j.surfcoat.2015.06.039 ↗
28. Corrosion behavior of WC-Co coatings deposited by cold gas spray onto AA 7075-T610.1016/j.corsci.2018.03.010 ↗
29. Passivity and pseudopassivity of cemented carbides10.1016/j.ijrmhm.2004.11.006 ↗
30. Improved electrochemical and mechanical performance of WC-Co cemented carbide by replacing a part of Co with Al2O310.1016/j.jallcom.2020.153857 ↗
31. Effects of (Ti,Ta,Nb,W)(C,N) on the microstructure, mechanical properties and corrosion behaviors of WC-Co cemented carbides10.1016/j.ceramint.2016.09.124 ↗
32. Electrochemical characterization of AlTiN, AlCrN and AlCrSiWN coatings10.1016/j.ijrmhm.2015.03.018 ↗
33. Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock10.1007/s11666-018-0775-2 ↗
34. Comparative study on corrosion behavior of WC-MgO composite and WC-6Co cemented carbide in NaCl solution10.1016/j.ceramint.2020.11.063 ↗
35. Lvovich VF · 2012
36. Uso da Espectroscopia de Impedância Eletroquímica (EIE) para monitoramento da corrosão em concreto armado
37. Microstructure and performance of WC–Co–Cr coating with ultrafine/nanocrystalline structures10.1007/s12598-017-0987-5 ↗
38. Corrosion behavior in artificial seawater of thermal-sprayed WC-CoCr coatings on mild steel by electrochemical impedance spectroscopy10.1007/s10008-011-1403-y ↗
39. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
40. Effect of WC grain size on the corrosion behavior of WC–Co based hardmetals in alkaline solutions10.1016/j.ijrmhm.2009.02.004 ↗