journal article·2026Open access

In Situ SAXS Investigation of Bi-Bi2O3/C Anode Materials for Lithium-Ion Batteries Under Operational Conditions

Yihan Zhang, Mengyuan Zhao, Weidong Cheng, Zhaojun Wu

Materials Research· Volume 29

Abstract

Bismuth has become one of the most promising anodes for lithium-ion batteries (LIBs) due to its suitable operating voltage and high volumetric capacity. However, the inevitable volume expansion of bismuth during the charge/discharge cycling process of lithium-ion batteries can lead to severe capacity fading and eventual battery failure. Herein, Bi-Bi2O3/C composite materials were prepared using a combination of solvothermal and calcination methods, and a series of characterization tests were conducted to investigate the effects of different secondary calcination times on the microstructure, composition, electrochemical properties, and the internal structural evolution during the initial charge/discharge cycle of the composite materials. In situ synchrotron radiation small angle X-ray scattering (SAXS) was employed to reveal the multi-level nanostructure evolution of Bi-Bi2O3/C electrode materials during charge/discharge processes. The present work reveals that these SAXS findings provide some new insights into the theoretical mechanism for the development of LIBs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Qiqihar University, China

Tianneng New Energy (Huzhou) Co., China; Qiqihar University, China

Funding

Project of Education Department of Heilongjiang Province · College Students Innovation and Entrepreneurship Training Program of Heilongjiang Province

References (43)

Show source-provided references
1. Lithium-ion battery components are at the nexus of sustainable energy and environmental release of per- and polyfluoroalkyl substances10.1038/s41467-024-49753-5 ↗
2. Cathode regeneration and upcycling of spent LIBs: toward sustainability10.1039/D3EE00746D ↗
3. Sn/Al2O3/C/CNT composite prepared by wet milling as anode material for lithium-ion cells10.1016/j.jsamd.2017.04.003 ↗
4. Electronic structure ‘engineering’ in the development of materials for Li-ion and Na-ion batteries
5. Ti- and F- co-doped Li1.2Mn0.75Ni0.25O2 as efficient cathode materials for Li-ion batteries
6. Enhancing electrochemical performance of Ni-rich cathodes for Li-ion batteries through spatial atomic layer deposition of ZnO coatings
7. Practical evaluation of prelithiation strategies for next-generation lithium-ion batteries
8. A review of feature extraction toward health state estimation of lithium-ion batteries
9. Conflicting roles of F doping on electrochemical performance of layered-spinel Li1.2Mn0.75Ni0.25O2-zFz as cathode materials for Li-ion batteries
10. Nanoscale phenomena in lithium-ion batteries10.1021/acs.chemrev.9b00405 ↗
11. Highly N-doped, H-containing mesoporous carbon with modulated physicochemical properties as high-performance anode materials for Li-ion and Na-ion batteries
12. Enabling stable and high-rate of an olivine-type cathode LiFePO4 for Li-ion batteries by using graphene nanoribbons as conductive agent
13. Synthesis of LiFePO4/carbon/graphene for high-performance Li-ion battery
14. Bi@C sandwiched carbon nanolayers enables remarkable cyclability at high current density for lithium-ion batteries
15. Extended cycling performance of micron-sized bismuth anodes for lithium-ion batteries: self-healing of an alloy-type anode for lithium batteries10.1039/D3TA00712J ↗
16. Interface controlled solid-state lithium storage performance in free-standing bismuth nanosheets10.1039/D0DT03613G ↗
17. Metal-organic frameworks (MOFs) and their derivative as electrode materials for lithium-ion batteries
18. Metal-organic frameworks and their composites for advanced lithium-ion batteries: synthesis, progress and prospects10.1016/j.jechem.2023.10.006 ↗
19. Toad egg-like bismuth nanoparticles encapsulated in an N-doped carbon microrod via supercritical acetone as anodes in lithium-ion batteries10.1016/j.jiec.2021.10.019 ↗
20. Silicon oxycarbide-encapsuled bismuth for superior lithium storage
21. Enhanced electrochemical performance of Bi2O3 via facile synthesis as anode material for ultra-long cycle lifespan lithium-ion batteries
22. Two-dimensional bismuth oxide heterostructured nanosheets for lithium- and sodium-ion storages10.1021/acsami.9b09882 ↗
23. Bi@C fibre synthesized by electrostatic spinning as high-performance anode material for Li-ion batteries10.1007/s11581-022-04763-5 ↗
24. Nanosized-bismuth-embedded 1D carbon nanofibers as high-performance anodes for lithium-ion and sodium-ion batteries10.1007/s12274-016-1408-z ↗
25. Bi-MOF derived micro/meso-porous Bi@C nanoplates for high performance lithium-ion batteries10.1039/D0NR03219K ↗
26. Bi2O3 nanospheres coated in electrospun carbon spheres derived Bi@C used as anode materials for lithium-ion batteries
27. Bi dots confined by functional carbon as high-performance anode for lithium ion batteries
28. Microstructure modulation improving the stability performance of a Bi anode for lithium-ion batteries10.1039/D4NR05212A ↗
29. Progress, challenges, and perspectives on alloy-based anode materials for lithium ion battery: a mini-review10.1021/acs.energyfuels.4c03023 ↗
30. The significance of detecting imperceptible physical/chemical changes/reactions in lithium-ion batteries: a perspective10.1039/D2EE01020H ↗
31. Electrochemical restoration of battery materials guided by synchrotron radiation technology for sustainable lithium-ion batteries10.1002/smtd.202201658 ↗
32. Recent advances in battery characterization using in situ XAFS, SAXS, XRD, and their combining techniques: from single scale to multiscale structure detection
33. Atomic spectrometry update: review of advances in the analysis of metals, chemicals and materials10.1039/D2JA90050E ↗
34. Operando grazing incidence small-angle X-ray scattering/X-ray diffraction of model ordered mesoporous lithium-ion battery anodes10.1021/acsnano.6b06708 ↗
35. Insights into the nanostructure, solvation, and dynamics of liquid electrolytes through small-angle X-ray scattering10.1002/aenm.202002821 ↗
36. Unveiling the role of micropores in porous carbon for Li-S batteries using operando SAXS10.1039/D1CC04270J ↗
37. The study on nanostructural evolution of CuO/Graphene oxide nanocomposite during the first discharge processes10.1016/j.matchemphys.2020.124157 ↗
38. The study on nanostructural evolution of SnO2-carbon aerogel nanocomposite during the first discharge process
39. A study on the nanostructural evolution of Bi/C anode materials during their first charge/discharge processes10.3390/ma17051140 ↗
40. Phase transition analysis of graphite electrode during high-rate discharging by operando synchrotron radiation X-ray diffraction10.1016/j.carbon.2025.120204 ↗
41. Measurement and analysis of small-angle X-ray scattering10.1021/i560151a005 ↗
42. Extended cycling performance of micron-sized bismuth anodes for lithium-ion batteries: self-healing of an alloy-type anode for lithium batteries10.1039/D3TA00712J ↗
43. Bismuth-organic framework anodes for extremely high capacity and stable lithium storage10.1002/adfm.202530553 ↗