journal article·2024-09

Study of the influence of steel chemical and structural heterogeneity on fracture toughness of railway wheels

O. I. Babachenko, G. A. Kononenko, Zh. A. Dement’eva, K. G. Domina, R. V. Podolskyi, O. A. Safronova

Materials Science· Volume 60· Issue 2
Publisher page

Abstract

The effect of structural and chemical heterogeneity of steel on the fracture toughness of the railway wheel was studied. The formation of a heterogeneous microstructure is associated with the presence of dendritic liquation of elements in the metal structure. The metal of the samples, which is characterized by the lower value of fracture toughness, in addition to sorbitol-like pearlite with excess ferrite on the boundaries of the “former” austenite grains, has acicular morphology (bainite structures) of the structure. They were concentrated, mainly, in microvolumes enriched with manganese. The acicular structure in the samples with high values of fracture toughness was not observed. The chemical composition of the sample’s structural component was studied. Areas with an acicular structure had an increased content of manganese compared to pearlite and ferrite located nearby. It was proved that liquation phenomena in the metal of the railway wheel rim with increased content of alloying elements (carbon, silicon, and manganese) were the CAUSE for the formation of the metal heterogeneous microstructure after thermal products hardening, and the presence of areas with bainite structures negatively affects the fracture toughness of the railway wheel rim metal.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Metal Alloys Wear and Properties · Engineering Diagnostics and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. J. Miettinen, S. Koskenniska, V.-V. Visuri, M. Somani, T. Fabritius, J. Kömi, Thermodynamic, kinetic, and microstructure data for modeling solidification of Fe–Al–Mn–Si–C alloys. Met Mater Trans B 51(6), 2946–2962 (2020). https://doi.org/10.1007/s11663-020-01973-y10.1007/s11663-020-01973-y ↗
2. V.V. Parusov, A.B. Sychkov, Y.V. Parusov, Theoretical and technological basis for production of high-efficient rods (Art-Press, Dnipropetrovsk, 2012). in Russian
3. A.M. Hutny, M. Warzecha, W. Derda, P. Wieczorek, Segregation of elements in billets made of carbon steels for long products. Arch Met Mater 63(4), 2075–2079 (2018). https://doi.org/10.24425/amm.2018.12514510.24425/amm.2018.125145 ↗
4. O.P. Ostash, V.V. Kulyk, V.D. Poznyakov, O.A. Haivorons’kyi, L.I. Markashova, V.V. Vira, Z.A. Duriagina, T.L. Tepla, Fatigue crack growth resistance of welded joints simulating the weld-repaired railway wheels metal. Arch Mat Sci Eng 86(2), 49–55 (2017). https://doi.org/10.5604/01.3001.0010.488510.5604/01.3001.0010.4885 ↗
5. O.P. Ostash, I.M. Andreiko, V.V. Kulyk, V.I. Vavrukh, Influence of braking on the microstructure and mechanical behavior of railroad wheel steels. Mater Sci 48(5), 569–574 (2013). https://doi.org/10.1007/s11003-013-9539-910.1007/s11003-013-9539-9 ↗
6. S.V. Bobyr, E.V. Parusov, G.V. Levchenko, A. Yu. Borisenko, I.M. Chuiko, Shear transformation of austenite in steels considering stresses’ effects. Progr Phys Met 23(3), 379–410 (2022). https://doi.org/10.15407/ufm.23.03.37910.15407/ufm.23.03.379 ↗
7. O.I. Babachenko, K.H. D’omina, H.A. Kononenko, Z.A. Dement’yeva, R.V. Podol’s’kyy, O.A. Safronova, Influence of cooling rate at hardening of continuous casting blank on parameters of dendritic structure of carbon steel with 0.54% C. Met I Noveishie Tekhnol 43(11), 1537–1551 (2021). https://doi.org/10.15407/mfint.43.11.153710.15407/mfint.43.11.1537 ↗
8. A.B. Sychkov, E.V. Parusov, A.N. Zavalishin, A.V. Kozlov, Inherent effect of the crystal structure of continuous cast steel billets on the formation of structure of high carbon wire rod in coils. J Chem Technol Met 53(5), 977–985 (2018)
9. V.A. Lutsenko, E.V. Parusov, O.V. Parusov, O.V. Lutsenko, I.M. Chuiko, T.M. Golubenko, Peculiarities of formation of high-carbon steel structure during rolling. Mater Sci 58(5), 621–628 (2023). https://doi.org/10.1007/s11003-023-00708-z10.1007/s11003-023-00708-z ↗
10. О.P. Ostash, V.V. Kulyk, V.D. Poznyakov, О.А. Gaivorons’kyi, V.V. Vira, Influence of the modes of heat treatment on the strength and cyclic crack-growth resistance of 65G steel. Mater Sci 54(6), 776–782 (2019). https://doi.org/10.1007/s11003-019-00263-610.1007/s11003-019-00263-6 ↗