journal article·2019-09

Corrosion and Catalytic Properties of Co–Mo–Re Electrolytic Coatings

Yu S. Yapontseva, V. S. Kublanovsky

Materials Science· Volume 55· Issue 2
Publisher page

Abstract

We study the corrosion properties of Co–Mo–Re electrolytic alloys deposited from citrate electrolyte with pH 3.5 and 6.3. It is shown that these coatings have high corrosion resistances in acid, neutral, and alkaline solutions. We analyze the influence of density of the deposition current and, hence, of the chemical composition of coatings on their corrosion behavior in a KOH solution. It is shown that the corrosion resistance depends on the rhenium content of the deposit. This element proves to be the most corrosion-resistant component. We investigate the catalytic properties of the obtained alloys in the reaction of hydrogen release running in a KOH solution. It is shown that rhenium exerts a negative influence on the overvoltage of hydrogen release and the alloy with better anticorrosion properties reveals hydrogen overvoltage greater than for the pure cobalt. As the rhenium content of the deposit becomes lower, we observe the manifestations of catalytic activity, i.e., the overvoltage of hydrogen reduction becomes weaker and the corrosion resistance of the coatings significantly decreases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Electrodeposition and Electroless Coatings · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. X.-X. Zhang, Yu J Zhao and Y-Zh Wei, “Electrolytic reduction of Re (VII) using a flow type electrolysis cell and its possibility of radiopharmaceuticals application,” Nuclear Sci. Technol.,26, 10308 (2015).
2. V. S. Kublanovskii, Yu. S. Yapontseva, Yu. N. Troshchenkov, and V. A. Gromova, “Corrosion and magnetic properties of electrolytic Co–Mo alloys,” Rus. J. Appl. Chem.,83, 440–444 (2010).10.1134/S1070427210030134 ↗
3. Y. Messaoudi, A. Azizi, N. Fenineche, G. Schmerber, and A. Dinia, “Electrochemical production of magnetic Co–Mo alloys thin films,” Sensor Lett.,11, 1–6 (2013).10.1166/sl.2013.2990 ↗
4. E. Gómez, E. Pellicer, and E. Vallés, “Electrodeposited cobalt-molybdenum magnetic materials,” J. Electroanalyt. Chem.,517, 109–116 (2001).10.1016/S0022-0728(01)00682-9 ↗
5. V. S. Kublanovsky and Y. S. Yapontseva, “Electrocatalytic properties of Co–Mo alloys electrodeposited from a citratepyrophosphate electrolyte,” Electrocatalysis,5, 372 (2014).10.1007/s12678-014-0197-y ↗
6. V. V. Kuznetsov, A. A. Kalinkina, T. V. Pshenichkina, and V. V. Balabaev, “Electrocatalytic properties of cobalt-molybdenum alloy deposits in the hydrogen evolution reaction,” Russ. J Electrochem.,44, 1350 (2008).10.1134/S1023193508120070 ↗
7. T. Ohmon, H. Go, A. Nakayama, H. Mametsuka, and E. Suzuki, “Influence of sputtering parameters on hydrogen evolution overvoltage in sputter-deposited Co–Mo alloy electrode,” Mat. Letters,47, 103–106 (2001).10.1016/S0167-577X(00)00218-4 ↗
8. Yu. Yapontseva, V. Kublanovsky, O. Bersirova, and V. Gromova, “Corrosion properties of the cobalt–molybdenum coatings deposited from citrate-pyrophophate electrolytes,” Fiz.-Khim. Mekh. Mater., Special Issue, No. 8, 343–348 (2010).
9. H. Krawiec, V. Vignal, and M. Latkiewicz, “Structure and electrochemical behavior in the Ringer’s solution at 25°C of electrodeposited Co-Mo nanocrystalline coating,” Mat. Chem. Phys.,183, 121–130 (2016).10.1016/j.matchemphys.2016.08.009 ↗
10. A. Naor, N. Eliaz, and E. Gileadi, “Electrodeposition of alloys of rhenium with iron-group metals from aqueous solutions,” J. Electrochem. Soc.,157, 422–427 (2010).10.1149/1.3430084 ↗
11. E. M. Savitskii and M. A. Tylkina, A Study and Use of Rhenium Alloys, Amerind, Delhi (1983).
12. A. D. Davydov, V. S. Shaldaev, A. N. Malofeeva, O. V. Chernyshova, and V. M. Volgin, “Determination of corrosion rate of rhenium and its alloys,” Chem. Eng. Transact.,41, 289–294 (2014).
13. Y. S. Yapontseva, A. I. Dikusar, and V. S. Kublanovskii, “Study of the composition, corrosion, and catalytic properties of Co–W alloys electrodeposited from a citrate pyrophosphate electrolyte,” Surf. Eng. Appl. Electrochem.,50, 330 (2014).10.3103/S1068375514040139 ↗
14. P. Quaino, F. Juarez, E. Santos, and W. Schmickler, “Volcano plots in hydrogen electrocatalysis—uses and abuses,” Beilstein J. Nanotechnol.,5, 846–854 (2014).10.3762/bjnano.5.96 ↗