Theoretical strength of solids: recent results and applications
Source abstract
Abstract
We present the results of recent achievements in the field of atomistic evaluation of the theoretical (ideal) strength of solids with emphasis on the ab initio approaches to the synthesis of the theoretical and experimental data. It is shown that the characteristics of fracture toughness (brittleness) of polycrystals are partially inherited from their (perfect) lattices. On the other hand, the response of perfect metallic crystals to triaxial tension in terms of the ultimate strain is qualitatively different from the response typical of the engineering materials. This can be attributed to the plasticity-driven growth and coalescence of microvoids at particles of the secondary phase under triaxial tension. The values of theoretical shear strength computed by using ab initio and/or MD methods are close to the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. J. Pokluda and P. Šandera, Micromechanisms of Fracture and Fatigue, In a Multiscale Context, Springer, London (2010).10.1007/978-1-84996-266-7 ↗
2. D. Goldschmidt, Single-Crystal Blades, in: D. Coutsouradis, et al., (editors), Materials for Advanced Power Engineering, Part I, Kluwer, Dordrecht (1994).10.1007/978-94-011-1048-8_55 ↗
3. D. C. Wallace (editor), Thermodynamics of Crystals, John Wiley & Sons, New-York–London–Sydney–Toronto (1972).
4. S. Yip, J. Li, M. Tang, and J. Wang, “Mechanistic aspects and atomic-level consequences of elastic instabilities in homogeneous crystals,” Mater. Sci. Eng., A317, 236 (2001).10.1016/S0921-5093(01)01162-5 ↗
5. M. Šob, L. G. Wang, and V. Vitek, “Local stability of higher-energy phases in metallic materials and its relation to the structure of extended defects,” Comput. Mater. Sci., 8, 100 (1997).10.1016/S0927-0256(97)00022-0 ↗
6. F. Milstein and B. Farber, “Theoretical fcc → bcc transition under [100] tensile loading,” Phys. Rev. Lett., 44, 277–280 (1980).10.1103/PhysRevLett.44.277 ↗
7. J. Pokluda, M. Černý, P. Šandera, and M. Šob, “Calculations of theoretical strength: state of the art and history,” J. Computer-Aided Mater. Design, 11, 1–28 (2004).10.1007/s10820-004-4567-2 ↗
8. D. M. Clatterbuck, C. R. Krenn, M. L. Cohen, and J. W. Jr. Morris, “Phonon instabilities and the ideal strength of aluminum,” Phys. Rev. Lett., 91, 135501 (2003).10.1103/PhysRevLett.91.135501 ↗
9. W. Kohn and L. J. Sham, “Self-consistent equations including exchange and correlation effects,” Phys. Rev., 140, A1133–A1138 (1965).10.1103/PhysRev.140.A1133 ↗
10. E. Esposito, A. E. Carlson, B. D. Ling, H. Ehrenreich, and C. D. Jr. Gelatt, “First-principles calculations of the theoretical tensile strength of copper,” Phil. Mag., A41, 251 (1980).10.1080/01418618008236140 ↗
11. M. Šob, M. Friák, D. Legut, J. Fiala, and V. Vitek, “The role of ab initio electronic structure calculations in studies of the strength of materials,” Mater. Sci. Eng., A387–389, 148–157 (2004).10.1016/j.msea.2003.10.376 ↗
12. M. Černý and J. Pokluda, “Influence of superimposed biaxial stress on the tensile strength of perfect crystals from first principles,” Phys. Rev., B76, 024115 (2007).10.1103/PhysRevB.76.024115 ↗
13. M. Černý and J. Pokluda, “Ideal tensile strength of cubic crystals under superimposed transverse biaxial stresses from first principles,” Phys. Rev., B82, 74106 (2010).
14. W. Li and T. Wang, “Ab initio investigation of the elasticity and stability of aluminum,” J. Phys.: Condensed Matter, 10, 9889 (1998).10.1088/0953-8984/10/43/033 ↗
15. W. Luo, D. Roundy, M. L. Cohen, and J. W. Jr. Morris, “Ideal strength of bcc molybdenum and niobium,” Phys. Rev., B66, 094110 (2002).10.1103/PhysRevB.66.094110 ↗
16. M. Černý, M. Šob, J. Pokluda, and P. Šandera, “Ab initio calculations of ideal tensile strength and mechanical stability in copper,” J. Phys.: Condensed Matter, 16, 1045 (2004).10.1088/0953-8984/16/7/004 ↗
17. M. Černý and J. Pokluda, “The theoretical strength of fcc crystals under multiaxial loading,” Comput. Mater. Sci., 50, 2257–2261 (2011).10.1016/j.commatsci.2011.03.002 ↗
18. P. Řehák, M. Černý, and J. Pokluda, “The [100] compressive strength of perfect cubic crystals under superimposed biaxial stresses,” Key Eng. Mater., 465, 183–186 (2011).10.4028/www.scientific.net/KEM.465.183 ↗
19. S. Kamran, K. Chen, and L. Chen, “Ab initio examination of ductility features of fcc metals,” Phys. Rev., B79, 024106 (2009).10.1103/PhysRevB.79.024106 ↗
20. A. T. Paxton, P. Gumbsch, and M. Methfessel, “A quantum-mechanical calculation of the theoretical strength of metals,” Phil. Mag. Lett., 63, 267 (1991).10.1080/09500839108214654 ↗
21. P. Šandera and J. Pokluda, “Improvement of the Mackenzie theory on ideal shear strength,” Scripta Metallurg. Mater., 29, 1445 (1993).10.1016/0956-716X(93)90334-O ↗
22. M. Černý and J. Pokluda, “Influence of normal stress on theoretical shear strength of fcc metals,” Mater. Sci. Eng., A483–484, 692–694 (2008).10.1016/j.msea.2006.09.159 ↗
23. M. Černý and J. Pokluda, “Influence of superimposed normal stress on the <112> {111} shear strength in perfect fcc metals,” Comput. Mater. Sci., 44, 127–130 (2008).10.1016/j.commatsci.2008.01.026 ↗
24. M. Černý, P. Šesták, and J. Pokluda, “Influence of superimposed normal stress on shear strength of perfect bcc crystals,” Comput. Mater. Sci., 47, 907–910 (2010).10.1016/j.commatsci.2009.11.022 ↗
25. M. Černý and J. Pokluda, “The theoretical shear strength of fcc crystals under superimposed triaxial stress,” Acta Mater., 58, 3117–3123 (2010).10.1016/j.actamat.2010.01.050 ↗
26. M. Černý and J. Pokluda, “The Theoretical tensile strength of fcc crystals predicted from shear strength calculations,” J. Phys.: Condensed Matter., 21, 145406 (2009).10.1088/0953-8984/21/14/145406 ↗
27. D. Roundy and M. L. Cohen, “Ideal strength of diamond, Si, and Ge,” Phys. Rev., B64, 212103 (2001).10.1103/PhysRevB.64.212103 ↗
28. R. H. Telling, C. J. Pickard, M. C. Payne, and J. E. Field, "Theoretical strength and cleavage of diamond,” Phys. Rev. Lett., 84, 5160–5163 (2000).10.1103/PhysRevLett.84.5160 ↗
29. N. H. Macmillan, in: R. M. Latanision and J. R. Pickens (editors), Atomistics of Fracture, Plenum, New York (1983).
30. A. Kelly and N. H. Macmillan, Strong Solids, Clarendon Press, Oxford (1986).
31. Y. Umeno and M. Černý, “Effect of normal stress on the ideal shear strength in covalent crystals,” Phys. Rev., B77, 100101 (2008).10.1103/PhysRevB.77.100101 ↗
32. P. Šandera, J. Pokluda, L. G. Wang, and M. Šob, “Calculation of theoretical strength of solids by linear muffin-tin orbitals (LMTO) method,” Mater. Sci. Eng., A234, 370–372 (1997).10.1016/S0921-5093(97)00170-6 ↗
33. A. P. Shpak, S. O. Kotrechko, T. I. Mazilova, and I. M. Mikhailovskij, “Inherent tensile strength of molybdenum nanocrystals,” Science and Technology of Advanced Materials, 10, 045004 (2009).10.1088/1468-6996/10/4/045004 ↗
34. S. Ogata, J. Li, N. Hirosaki, Y. Shibutani, and S. Yip, “Ideal shear strain of metals and ceramics,” Phys. Rev., B70, 104104 (2004).10.1103/PhysRevB.70.104104 ↗
35. M. Černý, J. Pokluda, P. Šandera, and M. Šob, “Ab initio calculations of elastic and magnetic properties of Fe, Co, Ni, and Cr crystals under isotropic deformation,” Phys. Rev., B67, 035116 (2003).10.1103/PhysRevB.67.035116 ↗
36. M. Černý and J. Pokluda, “Stability of fcc crystals under hydrostatic loading,” J. Alloys Comp., 378, 159–162 (2004).10.1016/j.jallcom.2003.10.096 ↗
37. M. Černý, J. Pokluda, and P. Šandera, “Ab initio analysis of theoretical isotropic strength and elasticity of nickel aluminide compounds,” Mater. Sci. Eng., A387–389, 923–925 (2004).10.1016/j.msea.2004.01.135 ↗
38. M. Černý, P. Šandera, and J. Pokluda, “Ab initio calculation of ideal strength for cubic crystals under three-axial tension,” Czechoslovak J. Phys., 49, 1495–1501 (1999).10.1023/A:1021166130232 ↗
39. J. W. Morris and C. R. Krenn, “The internal stability of an elastic solid,” Phil. Mag., A80, 2827–2840 (2000).10.1080/01418610008223897 ↗
40. Y. Song, R. Yang, et al., “Calculation of theoretical strengths and bulk moduli of bcc metals,” Phys. Rev., B59, 14220 (1999).10.1103/PhysRevB.59.14220 ↗
41. M. Černý, “Elastic stability of magnetic crystals under isotropic compression and tension,” Mater. Sci. Eng., A462, 432–435 (2007).10.1016/j.msea.2006.02.458 ↗
42. M. A. Tschopp and D. L. McDowell, “Dislocation nucleation in Σ3 asymmetric tilt grain boundaries,” Int. J. Plasticity, 24, 191–217 (2008).10.1016/j.ijplas.2007.02.010 ↗
43. Horsfield, et al., “Correlated electron-ion dynamics in metallic systems,” Comput. Mater. Sci., 44, 16–20 (2008).10.1016/j.commatsci.2008.01.055 ↗
44. M. Göken, M. Kempf, and W. D. Nix, “Hardness and modulus of the lamellar microstructure in PST–TiAl studied by nanoindentations and AFM,” Acta Mater., 49, 903–911 (2001).10.1016/S1359-6454(00)00375-X ↗
45. C. R. Krenn, D. Roundy, M. L. Cohen, D. C. Chrzan, and J. W. Jr. Morris, “Connecting atomistic and experimental estimates of ideal strength,” Phys. Rev., B65, 134111 (2002).10.1103/PhysRevB.65.134111 ↗
46. J. Horníková, M. Černý, P. Šandera, and J. Pokluda, “Onset of microplasticity in copper crystal during nanoindentation,” Key Eng. Mater., 348–349, 801–804 (2007).10.4028/www.scientific.net/KEM.348-349.801 ↗
47. J. Horníková, P. Šandera, M. Černý, and J. Pokluda, “Multiscale modeling of nanoindentation test in copper crystal,” Eng. Fract. Mech., 75, 3755–3762 (2008).10.1016/j.engfracmech.2007.10.016 ↗
48. M. A. Tschopp, D. E. Spearot, and D. L. McDowell, “Atomistic simulations of homogeneous dislocation nucleation in single crystal copper,” Modelling and Simulation in Materials Science and Engineering, 15, 693–709 (2007).10.1088/0965-0393/15/7/001 ↗