journal article·2000-03

Some theoretical aspects of estimation of damage to products by using acoustic emission signals

O. E. Andreikiv, V. R. Skal’s’kyi, O. M. Serhienko, S. E. Kovchyk

Materials Science· Volume 36· Issue 2
Publisher page

Abstract

We conceptually discuss the methodological aspects of the application of the phenomenon of acoustic emission to the diagnostics and non-destructive testing of products and their elements and units and offer approaches to the theoretical and experimental study of the interrelation of parameters of acoustic emission signals with the characteristics of nucleation and propagation of crack-like defects. We propose to use new techniques for determination of the coordinates of defects, their geometrical size, and their orientation in real constructions on the basis of the results of research and the new technical means developed for realization of these techniques. Prospects of the application of these techniques to non-destructive testing and technical diagnostics of products at the stage of their manufacture, when starring tests, and during operation are justified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Engineering Diagnostics and Reliability · Mineral Processing and Grinding · Industrial Engineering and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. V. A. Greshnikov and Yu. B. Drobot,Acoustic Emission. Application to Testing of Materials and Products [in Russian], Izd. Standartov. Moscow (1976).
2. A. Green, C. Lockman and R. Seek “Acoustic verification of structural integrity of polaris chambers,”Modern Plast. 137–139. 178, 180(1964).
3. T. Drouillard,Acoustic Emission : A Bibliogr. with Abstr., IFU/Plenum, New York.
4. C. A. Tatro, R. G. Liptai, and D. O. Harris, “Acoustic emission technique in materials research,”Int. J. Nondestr. Testing, 3, No. 3, 215–275(1971).
5. Ya. A. Shneiderman, “New nondestructive methods of control over quality and technical diagnostics. Review,”Zarubezlmaya Radioèlectronika. No. 5, 74–82 (1974).
6. J. S. Green and B. W. Toney, “Acoustic monitoring of airframe structural proof testing,”J. Environ. Sci. 15, No. 1, 20–23, (1972).
7. T. Kishi and Y. Mori. “Evaluating the severity of rocket motor case during burst test using acoustic emission”, in: Acoust. Emiss. Monit. Pressure SysL FT. Lauderdal, Fla. (1979), pp. 131–148.10.1520/STP35080S ↗
8. V. V. Mashechkov and G. B. Muravin,Acoustic Emission Technique of Testing Products of the Rod- and Pipe Configurations [in Russian], Inventor’s Certificate USSR No. 905781 MKIG01 N29/04, Publ. 15.02.82, Bull. No. 6 (1982).
9. E. J. Green and L. M. Rogers, “Location of discrete sources of acoustic emission in complex tubular joints,” in:Non-Destr. Test.: Proc. 4th Eur. Conf, London, 13–15 September, 1987, Vol. 4, Oxford (1988), pp. 2984–3000.
10. Yu. M. Rapoport,Method of Quality Testing of Products [in Russian], Inventor’s Certificate USSR No. 905777 MKI G01 N29/04, Publ. 15.02.82, Bull. No. 6 (1982).
11. G.G. Zaretskii-Feoktistov and Yu. M. Rapoport.Method of Determination of Parameters of the Strongest Thermal Action Bome by a Product [in Russian], Inventor’s Certificate USSR No. 954875 MKI G01 N29/04, Publ. 30.08.82, Bull. No. 32 (1982).
12. V. M. Andronov, V. F. Korshak, R. I. Kuznetsova, and V. V. Nerubenko,Method of Control over Integrity Break during Thermal Action upon Alloys [in Russian], Inventor’s Certificate USSR No. 1599758 MKI G01 N29/04, Publ. 90, Bull. No. 6 (1990).
13. Yu. A. Nechaev,Method of a Nondestructive Test of Surface Defects of Products [in Russian], Inventor’s Certificate USSR No. 911324 MKI G01 N29/04, Publ. 07.03.82, Bull. No. 9 (1982).
14. H. Nakasa, “Application of acoustic emission technique to structural integrity assessment,” in:Acoust. Emis. Pap. Meet., Bad Nauheim, Apr. 1979, Oberursel (1980), pp. 311–325.
15. K. Yamaguhi and H. Oyaizu, “Distributed fracture monitoring system by high speed processing of acoustic emission microdata.” in:Non-Destr. Test.: Proc. 4th Eur. Conf, London, 13–17 September 1987, Vol. 4, Oxford (1988), pp. 1819–1825.
16. B. Tirbonod and L. Hanacek, “Some properties of acoustic emission signals measured in the vicinity of a crack during the cyclic pressure loading of a vessel,” in:Non-Destr. Test.: Proc. 4th Eur. Conf., London, 13–17 September 1987, Vol. 4, Oxford (1988), pp. 2943–2950.
17. A. E. Andreikiv and N. V. Lysak,Method of Acoustic Emission in the Study of Destructive Processes [in Russian], Naukova. Dumka, Kiev (1989).
18. M. Ohtsu, “Determination of crack orientation by acoustic emission.”Mater. Eval. 35, No. 9, 1070–1075,1082 (1987).
19. S. L. McBride Pollard, J. D. McPhail, P. S. Bowman, and O. T. Peters, “Acoustic emission detection of crack presence and crack advance during flight,”Rep. Progr. Quant. Nondestruct. Eval,8B, 1819–1825 (1988).
20. J. D. Achenbach and J. G. Hams, “Acoustic emission from a brief crack propagation event,”ASME: J. Appl. Mech. 46, No. 1, 107–112(1979).10.1115/1.3424480 ↗
21. I. G. Alekseev, A. V. Kudrya and M. A. Shtremel, “Acoustic emission parameters bearing information on a single brittle crack.”Defektoskopiya. No. 12 (1994).
22. V. R. Skal’skyi, O. E. Andreikiv and O. M. Sergienko, “Assessment of hydrogen damage of materials by the amplitudes of signals of acoustic emission,”Tekh. Diagnostika Nerazrushayushchiy Kontrol, No. 1,(1997).
23. C. B. Scruby, H. N. G. Wadley and K. L. Rusbridge, “Origin of acoustic emission in Al-Zn-Mg alloys,”Mater. Sci. Eng. 59, No. 2, 169–183(1983).10.1016/0025-5416(83)90165-9 ↗
24. J. G. Harris and J. Pott, “Surface motion excited by acoustic emission from a buried crack.”.Trans. ASME: J. Appl. Mech.,51, No. 1, 77–83(1984).10.1115/1.3167601 ↗
25. M. V. Lysak and V. R. Skal’skyi. “Methodological approach to experimental assessment of crack resistance of structural materials by acoustic emission,”Fiz.-Khim. Mekh. Mater.,33, No. 5, 17–30 (1997).
26. V. R. Skal’skyi,Development of Techniques of Assessment of Parameters of a Material’s Crack Resistance under Static Loading and Environment Action by the Method of Acoustic Emission [in Ukrainian], Author’s Abstract of the Candidate Thesis (Engineering Sciences), L’viv (1993).
27. N. V. Lysak and V. R. Skal’skyi, “On the directivity of acoustic emission radiation during destruction of materials and its practical application,”Tekhn. Diagnostika i Nerazrushayushchiy Kontrol’, No. 3, 22–32 (1993).
28. A. E. Andreikiv, N. V. Lysak, O. N. Sergienko, and V. R. Skal’skii,Theoretical Concepts of the Acoustic Emission Technique in the Study of Destructive Processes [in Russian], Preprint No. 137, Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L’viv (1987).
29. A. E. Andreikiv, N. V. Lysak, V. R. Skal’skii, et al., “The spectral analysis of acoustic emission from a growing crack.”Tekh. Diagnostika i Nerazrushayushchiy Kontrol, No. 1, 75–84 (1993).
30. V. R. Skal’skyi, O. M. Sergienko, L. Golaski, “Methodological aspects of the diagnostics of crack propagation in welded joints by the acoustic emission method,”Tekh. Diagnostika i Nerazrushayushchiy Kontrol, No. 4. 23–31 (1999).
31. O. M. Sergienko,Simulation of Crack Formation and Propagation in Three-Dimensional Deformable Bodies with Application of the Acoustic Emission Method [in Russian], Author’s Abstract of the Candidate Thesis (Physics and Mathematics). L’viv (1996).
32. A. E. Andreikiv, N. V. Lysak, V. R. Skal’skii, and O. N. Sergienko,Methodical Aspects of Application of the Acoustic Emission Technique to Assessment of Static Crack Resistance of Materials [in Russian], Preprint No. 165, Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L’viv (1990).
33. V. R. Skal’skyi, “On the problem of simulation of sources of acoustic emission,”Tekh. Diagnostika i Nerazrushayushchiy Kontrol, No. 3, 12–17(1997).
34. O. E. Andreikiv, V. R. Skal’skyi, and M. V. Lysak,Method of Control over Crack Growth in Material Samples [in Russian], Inventor’s Certificate, Ukraine, No. 2914, Publ. 26.12.94, BuU. 5–1. (1994).
35. M. V. Lysak, V. R. Skal’skyi, and O. M. Sergienko, “Study of waveguide influence on change in the parameters of acoustic emission signals,”Fiz.-Khim. Mekh. Mater.,30, No. 2, 64–71 (1994).
36. V. R. Skal’skyi, O. E. Andreikiv, M. V. Lysak, et al.,Devices and Installations for Determination of Crack Resistance of Structural Materials by the Acoustic Emission Method [in Russian], Preprint No. 1/98, Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L’viv (1998).
37. V. R. Skal’skyi, O. E. Andreikiv, M. V. Lysak, at al.,Electron Means for Examination of Crack Resistance of Materials by Signals of Acoustic Emission [in Russian], Preprint No. 195, Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L’viv (1995).
38. V. R. Skal’skyi, “The installation for assessment of static crack resistance of materials by signals of acoustic emission under the action of the environment and temperature,”Tekh. Diagnostika i Nerazrushayushchiy Kontrol, No. 3,45-50 (1996).
39. V. R. Skal’skyi, S. E. Kovchyk and V. M. Mochul’skyi,A Device for Testing of Specimens for Static Crack Resistance under Outof-Center Tension [in Ukrainian], Inventor’s Certificate, Ukraine, No. 3410, MKIG01N3/20, Publ. 27.12.94, Bull. No. 6–1 (1994).
40. V. R. Skal’skyi, V. M. Pustovoi, and A. Barkhan, “Portable storage of samplings of signals of acoustic emission SVR-6,”Tekh. Diagnostika i Nerazrushayushchiy Kontrol, No. 1, 24–32 (1999).