Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
Source abstract
Abstract
Abstract Additive layer manufacturing offers a potential for time and cost savings, especially for aerospace components made from costly titanium alloys. In this paper, the morphology, microstructure, chemical composition, and hardness of additive manufactured Ti-6Al-4V blocks are investigated and discussed. Blocks (7 beads wide, 7 layers high) were deposited using Ti-6Al-4V wire and a Nd:YAG laser. Two different sets of parameters are used and three different post heat treatment conditions (as-built, 600 °C/4 h, 1200 °C/2 h) are investigated. The experiments reveal elementary properties of additive manufactured Ti-6Al-4V material in correlation to process parameters and heat treatments, which are discussed comprehensively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. Walner · Konstruktion · 2008 · 5 · 6
2. Peters · Adv. Eng. Mater. · 2003 · 5 · 41910.1002/adem.200310095 ↗
3. Peters · 2002
4. Brandl · 2010
5. Syed · Appl. Surf. Sci. · 2006 · 252 · 480310.1016/j.apsusc.2005.08.118 ↗
6. Pashby · 2004 · 18
7. Mok · 2005 · 773
8. Baufeld · Mater. Des. · 2010 · 31 · 10610.1016/j.matdes.2009.11.032 ↗
9. Ader · 2004 · 26
10. Syed · Appl. Surf. Sci. · 2005 · 248 · 51810.1016/j.apsusc.2005.03.039 ↗
11. Syed · 2004
12. Syed · Appl. Surf. Sci. · 2005 · 247 · 26810.1016/j.apsusc.2005.01.138 ↗
13. Mok · Surf. Coat. Technol. · 2008 · 202 · 393310.1016/j.surfcoat.2008.02.008 ↗
14. Mok · Surf. Coat. Technol. · 2008 · 202 · 461310.1016/j.surfcoat.2008.03.028 ↗
15. Sorin · 2004
16. Wang · Appl. Surf. Sci. · 2006 · 253 · 142410.1016/j.apsusc.2006.02.028 ↗
17. Wang · Mater. Sci. Eng. A · 2007 · 445–446 · 46110.1016/j.msea.2006.09.093 ↗
18. G. Lopes, R.M. Miranda, L. Quintino, J.P. Rodrigues, Additive manufacturing of Ti-6Al-4V based components with high power fiber lasers, in: Virtual and Rapid Manufacturing, Tailor & Francis Group, 2007, pp. 369–374.
19. Almeida · 2010 · 25
20. Charles · 2007
21. Charles · 2008
22. Baufeld · J. Mater. Proc. Technol. · 2011 · 211 · 114610.1016/j.jmatprotec.2011.01.018 ↗
23. Baufeld · Metall. Mater. Trans. A · 2010 · 41A · 191710.1007/s11661-010-0255-x ↗
24. Clark · J. Mater. Proc. Technol. · 2008 · 203 · 43910.1016/j.jmatprotec.2007.10.051 ↗
25. Wallace · 2004 · 104
26. Stecker · 2006 · 35
27. Taminger · 2006
28. Bergmann · Materialwiss. Werkst. · 2004 · 35 · 54310.1002/mawe.200400776 ↗
29. Kim · Opt. Lasers Eng. · 2000 · 33 · 29910.1016/S0143-8166(00)00046-4 ↗
30. Kim · Appl. Phys. · 2004 · A79 · 158310.1007/s00339-004-2854-0 ↗
31. Meinert · 2000
32. Tusek · 2005 · 171
33. Brandl · 2009
34. SAE Aerospace, Heat Treatment of Titanium and Titanium Alloys, Aerospace Material Specification, AMS-H-81200A, 2003.
35. Deutsche Norm, Wärmebehandlung von Titan-Knetlegierungen, Deutsches Institut für Normung, DIN 65084, 1990.
36. US Department of Defense · 1974
37. S.M. Kelly, PhD Thesis, Virginia Polytechnic Institute and State University, 2004.
38. S. Bontha, PhD Thesis, Wright State University, 2006.
39. Kobryn · 2000 · 58
40. Leyens · 2003
41. Kobryn · JOM · 2001 · 53 · 4010.1007/s11837-001-0068-x ↗
42. Jia · 2005 · 119
43. Lütjering · 2003
44. Titanium · 1981
45. Ahmed · Mater. Sci. Eng. A · 1998 · 243 · 20610.1016/S0921-5093(97)00802-2 ↗
46. Semiatin · Metall. Mater. Trans. A · 2003 · 34 · 237710.1007/s11661-003-0300-0 ↗
47. Welsch · 1998
48. Wang · 2007
49. Titanium · 2000
50. Flower · Mater. Sci. Technol. · 1990 · 6 · 108210.1179/mst.1990.6.11.1082 ↗
51. ASM Handbook
52. SAE Aerospace, Titanium Alloy, Sheet, Strip, and Plate 6Al-4V Annealed, Aerospace Material Specification, AMS 4911L, 2007.
53. Baufeld · Sci. Technol. Adv. Mater. · 2009 · 10 · 146810.1088/1468-6996/10/1/015008 ↗
54. Karimzadeh · Mater. Sci. Eng. A · 2006 · 432 · 18410.1016/j.msea.2006.05.141 ↗
55. Liang · 2003 · 541
56. M. Gäumann, W. Kurz, Why is it so difficult to produce an equiaxed microstructure during welding? in: H. Cerjak (Ed.) Mathematical modelling of Weld Phenomena, vol. 4, Institute of Materials, Minerals and Mining, London, UK, 1998, pp. 125–135.10.1201/9781003580034-9 ↗
57. Kou · 1987
58. Walton · Trans. Metallurgical Soc. AIME · 1959 · 215 · 447
59. Amsterdam · 2009
60. Murr · J. Mech. Behav. Biomed. Mat. · 2009 · 2 · 2110.1016/j.jmbbm.2008.05.004 ↗
61. Ramosoeu · 2010 · 337
62. Murr · J. Mech. Behav. Biomed. Mater. · 2011 · 4 · 139610.1016/j.jmbbm.2011.05.010 ↗
63. Ackelid · 2009
64. Koike · J. Mater. Proc. Technol. · 2011 · 211 · 140010.1016/j.jmatprotec.2011.03.013 ↗
65. Al-Bermani · Metall. Mater. Trans. A · 2010 · 41 · 342210.1007/s11661-010-0397-x ↗
66. Thijs · Acta Mater. · 2010 · 58 · 330310.1016/j.actamat.2010.02.004 ↗
67. Kelly · Metall. Mater. Trans. A · 2004 · 35A · 186110.1007/s11661-004-0094-8 ↗
68. Baufeld · Mater. Sci. Eng. · 2009
69. C. Charles, Licentiate Thesis, Lulea University of Technology, Sweden, 2008.
70. Charles · 2006
71. Kelly · 2004
72. Brandl · Surf. Coat. Technol. · 2011 · 206 · 112010.1016/j.surfcoat.2011.07.095 ↗
73. Kelly · 2002
74. Kelly · 2000
75. Kelly · Metall. Mater. Trans. A · 2004 · 35 · 186910.1007/s11661-004-0095-7 ↗
76. Lee · Mater. Sci. Eng. A · 2004 · 366 · 2510.1016/j.msea.2003.08.061 ↗
77. Majdic · Z. Metallk. · 1974 · 65 · 173
78. Kellerer · Härterei-Technische Mitt. · 1970 · 25 · 242
79. Hornbogen · 2000
80. Majorell · Mater. Sci. Eng. A · 2002 · 326 · 29710.1016/S0921-5093(01)01507-6 ↗
81. Katzarov · Metall. Mater. Trans. A · 2002 · 33 · 102710.1007/s11661-002-0204-4 ↗
82. Ding · Mater. Sci. Eng. A · 2004 · 365 · 17210.1016/j.msea.2003.09.024 ↗
83. Brody · Sci. Technol. Appl. Titanium · 1970 · 1 · 2110.1016/B978-0-08-006564-9.50009-9 ↗
84. Brandl · Phys. Proc. · 2010 · 5 · 59510.1016/j.phpro.2010.08.087 ↗
85. Welsch · Z. Werkstofftechnik · 1977 · 8 · 14110.1002/mawe.19770080503 ↗
86. Lee · Mater. Sci. Eng. A · 2008 · 486 · 1910.1016/j.msea.2007.08.053 ↗