journal article·2016-03

Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting

Michael Cloots, Karsten Kunze, Peter J. Uggowitzer, Konrad Wegener

Publisher page

Abstract

This study investigates selective laser melting (SLM) of the nickel based superalloy IN738LC and the cobalt based alloy Mar-M509, and identifies the influence of process and material parameters on the resulting microstructure. Comprehensive microstructural characterization was performed using electron backscattered diffraction analysis. Significant differences between IN738LC and Mar-M509 were observed with respect to grain size, grain shape and texture sharpness. Alloy IN738LC exhibits coarse and elongated grains with a sharp texture and thus a pronounced mechanical anisotropy. Alloy Mar-M509 shows smaller grains with only moderate structural and mechanical anisotropy. The different microstructural and mechanical characteristics are attributed to the different recovery and recrystallization behavior of IN738LC and Mar-M509. The high stacking fault energy (SFE) of IN738LC results in pronounced recovery of lattice defects without affecting the basic grain structure, whereas the low SFE in Mar-M509 favors recrystallization with the effect of significant grain refinement and weakening of the solidification texture. The effect of microstructure and the structural anisotropy on the orientation-dependent values of the Young’s modulus and the mechanical properties are further discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Levy · Phys. Procedia · 2010 · 5 · 6510.1016/j.phpro.2010.08.123 ↗
2. Bormann · J. Mater. Eng. Perform. · 2012 · 21 · 251910.1007/s11665-012-0318-9 ↗
3. Rickenbacher · Rapid Prototyp. J. · 2012 · 19 · 28210.1108/13552541311323281 ↗
4. Brandl · Mater. Des. · 2012 · 34 · 15910.1016/j.matdes.2011.07.067 ↗
5. Buchbinder · Phys. Procedia · 2011 · 12 · 27110.1016/j.phpro.2011.03.035 ↗
6. Weingarten · J. Mater. Process. Technol. · 2015
7. A.B. Spierings, G.L. Levy, in: Proceedings of the Solid Freeform Fabrication Symposium, Austin 2009, pp. 342–353.
8. Gu · Appl. Surf. Sci. · 2008 · 255 · 188010.1016/j.apsusc.2008.06.118 ↗
9. Badrossamay · Int. J. Mach. Tools Manuf. · 2007 · 47 · 77910.1016/j.ijmachtools.2006.09.013 ↗
10. Feuerhahn · Phys. Procedia · 2013 · 41 · 83610.1016/j.phpro.2013.03.157 ↗
11. Linn · Mater. Sci. Eng. A · 2011 · 528 · 467610.1016/j.msea.2011.02.052 ↗
12. Seliga · 2005 · 118
13. Davis · 2000
14. Kruth · Proc. Inst. Mechanical Engineers, Part B: J. Eng. Manuf. · 2012
15. Thijs · Acta Mater. · 2013 · 61 · 180910.1016/j.actamat.2012.11.052 ↗
16. Buchbinder · J. Laser Appl. · 2015 · 27 · S2920510.2351/1.4906389 ↗
17. Simonelli · Mater. Sci. Eng.: A · 2014 · 616 · 110.1016/j.msea.2014.07.086 ↗
18. Kanagarajah · Mater. Sci. Eng.: A · 2013 · 588 · 18810.1016/j.msea.2013.09.025 ↗
19. A.O. Hakan B., Johansson S., in: ASME Turbo Expo 2013, San Antonio, Texas, USA, 2013.
20. T. Etter, K. Kunze, F. Geiger, H. Meidani, in: 2014 TMS Annual Meeting & Exhibition, TMS, San Diego, 2014.
21. Kunze · Mater. Sci. Engineering: A · 2015 · 620 · 21310.1016/j.msea.2014.10.003 ↗
22. Kurz · 1992
23. Gedda · J. Laser Appl. · 2002 · 14 · 7810.2351/1.1471565 ↗
24. Ganeriwala · Procedia CIRP · 2014 · 14 · 29910.1016/j.procir.2014.03.015 ↗
25. Amato · Acta Mater. · 2012 · 60 · 222910.1016/j.actamat.2011.12.032 ↗
26. Wan · Int. J. Fract. · 1975 · 11 · 25110.1007/BF00038892 ↗
27. Davies · Acta Metall. · 1973 · 21 · 134310.1016/0001-6160(73)90084-9 ↗
28. Ericsson · Acta Metall. · 1966 · 14 · 85310.1016/0001-6160(66)90006-X ↗
29. Dieter · 2003
30. M. Simonelli, PhD thesis, Loughborough University, 2014, pp. 223.
31. B. Vrancken, R. Wauthlé, J.-P. Kruth, J. Van Humbeeck, in: Proceedings of the Solid Freeform Fabrication Symposium, Austin, 2013.
32. Gottstein · 2010
33. Reed · 2006
34. Han · Mater. Sci. Eng.: A · 1995 · 191 · 10510.1016/0921-5093(95)80008-5 ↗