journal article·2012-03

Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels

Ji Hoon Kim, Daeyong Kim, Frédéric Barlat, Myoung-Gyu Lee

Publisher page

Abstract

Abstract A multi-scale micro-mechanical model was proposed to predict the cyclic behavior of dual-phase steels. The approach proposed in this study incorporates a simplified dislocation density model into the crystal plasticity finite element method (CP-FEM). The back stress resulting from dislocation pileups was used to reproduce the transient hardening behavior during load reversal. The simulations conducted using representative volume elements for the dual-phase steels lead to the following conclusions: (1) the large Bauschinger effect (BE) and permanent softening in dual-phase steels originate primarily from the inhomogeneity due to the soft and hard phases; (2) the elastic incompatibility due to the grain orientation distribution generates some BE, but is not sufficient to explain the measured stress–strain curve; and (3) the inclusion of the back stress produced by the dislocation pileup can explain the strain hardening stagnation during reverse loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Chaboche · Int. J. Plast. · 1986 · 2 · 14910.1016/0749-6419(86)90010-0 ↗
2. Chung · Int. J. Plast. · 2005 · 21 · 861
3. Boger · Int. J. Plast. · 2005 · 21 · 231910.1016/j.ijplas.2004.12.002 ↗
4. Kuwabara · 2008 · 19
5. Barlat · Int. J. Plast. · 2011
6. Abaqus, 2010. Abaqus 6.10 Analysis User's Manual, Dassault Systemes Simulia Corp.
7. Bronkhorst · Philos. Trans. R. Soc. Lond. A · 1992 · 341
8. Kalidindi · J. Mech. Phys. Solids · 1992 · 40
9. Beaudoin · Comp. Meth. Appl. Mech. Eng. · 1994 · 117 · 4910.1016/0045-7825(94)90076-0 ↗
10. Raabe · Adv. Eng. Mater. · 2002 · 4 · 16910.1002/1527-2648(200204)4:4<169::AID-ADEM169>3.0.CO;2-G ↗
11. Dawson · Int. Mater. Rev. · 2003 · 48 · 8610.1179/095066003225002415 ↗
12. Li · Metall. Mater. Trans. B · 1970 · 1 · 114510.1007/BF02900225 ↗
13. Meyers · Philos. Mag. A · 1982 · 46 · 73710.1080/01418618208236928 ↗
14. Hutchinson · Proc. R. Soc. Lond. A · 1976 · 348 · 146510.1098/rspa.1976.0027 ↗
15. Fleck · Acta Metall. Mater. · 1994 · 42 · 47510.1016/0956-7151(94)90502-9 ↗
16. Fleck · Adv. Appl. Mech. · 1997 · 33 · 29510.1016/S0065-2156(08)70388-0 ↗
17. Nix · J. Mech. Phys. Solids · 1998 · 46 · 41110.1016/S0022-5096(97)00086-0 ↗
18. Gurtin · J. Mech. Phys. Solids · 2002 · 510.1016/S0022-5096(01)00104-1 ↗
19. Huang · J. Mech. Phys. Solids · 2000 · 48 · 9910.1016/S0022-5096(99)00022-8 ↗
20. Kim · Mater. Sci. Eng. A · 2010 · 527 · 735310.1016/j.msea.2010.07.099 ↗
21. Lee · Int. J. Plast. · 2010 · 26 · 92510.1016/j.ijplas.2009.11.004 ↗
22. Lim · Int. J. Plast. · 2011 · 27 · 132810.1016/j.ijplas.2011.03.001 ↗
23. Kocks · Philos. Mag. · 1966 · 13 · 54110.1080/14786436608212647 ↗
24. Teodosiu · 1998 · 149
25. Rauch · Acta Mater. · 2007 · 55 · 293910.1016/j.actamat.2007.01.003 ↗
26. Vincze · Acta Mater. · 2005 · 53 · 100510.1016/j.actamat.2004.10.046 ↗
27. H.J. Kim, Bauschinger Effect in Simple Shear for DQIF and DP Steel Sheets, Pohang, POSTECH, Korea, Master Thesis, 2010.
28. Rice · J. Mech. Phys. Solids · 1971 · 19 · 43310.1016/0022-5096(71)90010-X ↗
29. Asaro · Acta Metall. · 1979 · 27 · 44510.1016/0001-6160(79)90036-1 ↗
30. Lee · J. Appl. Mech. · 1969 · 36
31. Peirce · Acta Metall. · 1983 · 31 · 195110.1016/0001-6160(83)90014-7 ↗
32. Hirth · 1982
33. Livingston · Acta Metall. · 1957 · 5 · 32210.1016/0001-6160(57)90044-5 ↗
34. Shen · Scripta Metall. · 1986 · 20 · 92110.1016/0036-9748(86)90467-9 ↗
35. Anderson · Acta Mater. · 2006 · 54 · 394110.1016/j.actamat.2006.04.026 ↗
36. Lee · Int. J. Plast. · 2010 · 26 · 68810.1016/j.ijplas.2009.10.001 ↗
37. Tomota · ISIJ Int. · 1992 · 32 · 34310.2355/isijinternational.32.343 ↗
38. Kuwabara · Int. J. Plast. · 2007 · 23 · 38510.1016/j.ijplas.2006.06.003 ↗
39. Veram · Int. J. Plast. · 2011 · 27 · 8210.1016/j.ijplas.2010.04.002 ↗
40. Lee · Int. J. Plast. · 2005 · 21 · 883
41. Lee · Int. J. Plast. · 2007 · 23 · 118910.1016/j.ijplas.2006.10.011 ↗