Dynamic compressive loading of expanded perlite/aluminum syntactic foam
Source abstract
Abstract
This paper addresses the analysis of expanded perlite/aluminum (EP/A356) syntactic foams under dynamic compressive loading conditions. Experimental and numerical analysis are conducted in order to determine compressive stress–strain response, effective material properties and deformation mechanisms. Foam samples are manufactured by combining A356 aluminum alloy with expanded perlite particles that introduce 60–65% porosity. Under compressive loading these pores gradually collapse resulting in an approximately constant macroscopic stress level of the syntactic foam. Testing at different compression velocities shows that the expanded perlite particles increase the compression resistance at higher strain rates. The effective material properties of the syntactic foam increase both with density and loading velocity. Infrared (IR) thermal imaging and finite element analysis allowed the independent identification of the dominant deformation mechanism: single struts that are parallel to the loading direction buckle and trigger the formation of multiple collapse bands that are approximately perpendicular to the loading direction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Merrett · Mater. Des. · 2013 · 44 · 31110.1016/j.matdes.2012.08.016 ↗
2. Hall · Scr. Mater. · 2000 · 43 · 51510.1016/S1359-6462(00)00460-7 ↗
3. Pinnoji · Int. J. Impact Eng. · 2010 · 37 · 27410.1016/j.ijimpeng.2009.05.013 ↗
4. Nesic · Steel Res. Int. · 2012 · 83 · 97210.1002/srin.201100284 ↗
5. Barnes · Int. J. Solids Struct. · 2014 · 51 · 163110.1016/j.ijsolstr.2013.11.019 ↗
6. Dannemann · Mater. Sci. Eng. A · 2000 · 293 · 15710.1016/S0921-5093(00)01219-3 ↗
7. Goel · Mater. Des. · 2012 · 42 · 41810.1016/j.matdes.2012.06.013 ↗
8. Edwin Raj · Mater. Sci. Eng.: A · 2009 · 526 · 1110.1016/j.msea.2009.07.017 ↗
9. Shen · Compos. Part B: Eng. · 2010 · 41 · 67810.1016/j.compositesb.2010.07.005 ↗
10. Mukai · Scr. Mater. · 2006 · 54 · 53310.1016/j.scriptamat.2005.10.062 ↗
11. Montanini · Int. J. Mech. Sci. · 2005 · 47 · 2610.1016/j.ijmecsci.2004.12.007 ↗
12. Mukai · Scr. Mater. · 1999 · 40 · 92110.1016/S1359-6462(99)00038-X ↗
13. Peroni · Int. J. Impact Eng. · 2013 · 53 · 7410.1016/j.ijimpeng.2012.07.002 ↗
14. Kanahashi · Mater. Trans. · 2002 · 43 · 254810.2320/matertrans.43.2548 ↗
15. Wang · Scr. Mater. · 2006 · 54 · 8310.1016/j.scriptamat.2005.09.008 ↗
16. Zou · Mater. Des. · 2013 · 45 · 55510.1016/j.matdes.2012.08.015 ↗
17. Dou · Scr. Mater. · 2007 · 57 · 94510.1016/j.scriptamat.2007.07.024 ↗
18. Goel · Mater. Sci. Eng. A · 2014 · 590 · 40610.1016/j.msea.2013.10.048 ↗
19. Mater. Des10.1016/j.matdes.2014.03.041 ↗
20. Luong · J. Alloys Compd. · 2013 · 550 · 41210.1016/j.jallcom.2012.10.171 ↗
21. A. Ohrndorf, et al., Mechanische Untersuchungen eines geschlossenporigen Aluminiumschaums. in Werkstoffprüfung 2000, Bad Nauheim: Deutscher Verband für Materialforschung und-prüfung e.V., 2000.
22. Dannemann · Mater. Sci. Eng. A · 2000 · 293 · 15710.1016/S0921-5093(00)01219-3 ↗
23. Vesenjak · Int. J. Mater. Eng. Innov. · 2009 · 1 · 17510.1504/IJMATEI.2009.029363 ↗
24. Vesenjak · Mater. Lett. · 2008 · 62 · 325010.1016/j.matlet.2008.02.054 ↗
25. Castro · Mater. Sci. Eng.: A · 2013 · 578 · 22210.1016/j.msea.2013.04.081 ↗
26. Peroni · Mater. Sci. Eng.: A · 2012 · 552 · 36410.1016/j.msea.2012.05.053 ↗
27. Taherishargh · Mater. Sci. Engi.: A · 2014 · 604 · 12710.1016/j.msea.2014.03.003 ↗
28. Taherishargh · Mater. Des. · 2014 · 63 · 37510.1016/j.matdes.2014.06.019 ↗
29. Taherishargh · Mat. Des. · 2014 · 66 · 29410.1016/j.matdes.2014.10.073 ↗
30. Vesenjak · Polym. Test. · 2013 · 32 · 153810.1016/j.polymertesting.2013.10.005 ↗
31. ISO, ISO 13314:2011 Mechanical Testing of Metals – Ductility Testing – Compression Test for Porous and Cellular Metals, 2011.
32. Duarte · Compos. Struct. · 2014 · 109 · 4810.1016/j.compstruct.2013.10.040 ↗
33. Vesenjak · Mech. Adv. Mater. Struct. · 2014 · 22 · 35910.1080/15376494.2012.736059 ↗
34. Veyhl · Int. J. Heat Mass Transf. · 2012 · 55 · 244010.1016/j.ijheatmasstransfer.2012.01.016 ↗
35. Belova · Scr. Mater. · 2011 · 65 · 43610.1016/j.scriptamat.2011.05.029 ↗
36. Vesenjak · Mater. Sci. Eng.: A · 2012 · 541 · 10510.1016/j.msea.2012.02.010 ↗
37. Veyhl · Mater. Sci. Eng.: A · 2011 · 528 · 455010.1016/j.msea.2011.02.031 ↗
38. Veyhl · Finite Elem. Anal. Des. · 2010 · 46 · 37110.1016/j.finel.2009.12.003 ↗
39. Sulong · Mater. Sci. Eng.: A · 2014 · 607 · 49810.1016/j.msea.2014.04.037 ↗
40. Hallquist · 2007
41. R. Ramsdale, Mechanical Engineering Handbook (cited 9th November 2011). Available from: 〈http://www.engineershandbook.com/index.htm〉, 2011.
42. P. Jacob, L. Goulding, An Explicit Finite Element Primer, NAFEMS, Glasgow, 2002.10.59972/bljrura0 ↗
43. Lee · Int. J. Solids Struct. · 2006 · 43 · 5310.1016/j.ijsolstr.2005.06.101 ↗
44. Zhao · Int. J. Mech. Sci. · 2005 · 47 · 75710.1016/j.ijmecsci.2004.12.012 ↗
45. Lide · 2005