journal article·2014-01

Microstructure and dynamic tensile behavior of DP600 dual phase steel joint by laser welding

Danyang Dong, Yang Liu, Yuling Yang, Jinfeng Li, Min Ma, Tao Jiang

Publisher page

Abstract

Abstract Dual phase (DP) steels have been widely used in the automotive industry to reduce vehicle weight and improve car safety. In such applications welding and joining have to be involved, which would lead to a localized change of the microstructure and property, and create potential safety and reliable issues under dynamic loading. The aim of the present study is to examine the rate-dependent mechanical properties, deformation and fracture behavior of DP600 steel and its welded joint (WJ) produced by Nd:YAG laser welding over a wide range of strain rates (0.001–1133 s −1 ). Laser welding results in not only significant microhardness increase in the fusion zone (FZ) and inner heat-affected zone (HAZ), but also the formation of a softened zone in the outer HAZ. The yield strength (YS) of the DP600 steel increases and the ultimate tensile strength (UTS) remains almost unchanged, but the ductility decreases after welding. The DP600 base metal (BM) and WJ are of positive strain rate sensitivity and show similar stress–strain response at all studied strain rates. The enhanced ductility at strain rates ranging from 1 to 100 s −1 is attributed to the retardation of the propagation of plastic strain localization due to the positive strain rate sensitivity and the thermal softening caused by deformation induced adiabatic temperature rise during dynamic tensile deformation. The tensile failure occurs in the inner HAZ of the joint and the distance of failure location from the weld centerline decreases with increasing strain rate. The mechanism for the changing failure location can be related to the different strain rate dependence of the plastic deformation behavior of the microstructures in various regions across the joint. The DP600 WJ absorbs more energy over the whole measured strain rates than that of the BM due to the higher strength at the same strain when the deformation only up to 10% is considered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Khan · Int. J. Plasticity · 2012 · 30–31 · 1
2. Rashid · Ann. Rev. Mater. Sci. · 1981 · 11 · 24510.1146/annurev.ms.11.080181.001333 ↗
3. Xu · Mater. Sci. Eng. A · 2012 · 553 · 5110.1016/j.msea.2012.05.091 ↗
4. Boyce · Int. J. Impact Eng. · 2009 · 36 · 26310.1016/j.ijimpeng.2007.11.006 ↗
5. Huh · Int. J. Mech. Sci. · 2008 · 50 · 91810.1016/j.ijmecsci.2007.09.004 ↗
6. Wang · Mater. Des. · 2013 · 47 · 51010.1016/j.matdes.2012.12.068 ↗
7. Farabi · Mater. Sci. Eng. A · 2010 · 527 · 121510.1016/j.msea.2009.09.051 ↗
8. Hazratinezhad · Mater. Des. · 2012 · 33 · 8310.1016/j.matdes.2011.06.070 ↗
9. Kang · Mater. Sci. Forum · 2007 · 539–543 · 396710.4028/www.scientific.net/MSF.539-543.3967 ↗
10. Sharma · Mater. Des. · 2009 · 30 · 414610.1016/j.matdes.2009.04.033 ↗
11. Reisgen · J. Mater. Process. Technol. · 2010 · 210 · 218810.1016/j.jmatprotec.2010.08.003 ↗
12. Xu · Mater. Des. · 2013 · 43 · 37310.1016/j.matdes.2012.07.017 ↗
13. Xia · J. Eng. Mater. Technol. ASME · 2007 · 129 · 44610.1115/1.2744417 ↗
14. Panda · J. Eng. Mater. Technol. ASME · 2008 · 130 · 041003110.1115/1.2969256 ↗
15. Biro · Metall. Mater. Trans. A · 2010 · 41 · 234810.1007/s11661-010-0323-2 ↗
16. Xia · ISIJ Int. · 2008 · 48 · 80910.2355/isijinternational.48.809 ↗
17. Yu · Mater. Des. · 2009 · 30 · 250110.1016/j.matdes.2008.10.001 ↗
18. Choi · Met. Mater. Int. · 2008 · 14 · 13910.3365/met.mat.2008.04.139 ↗
19. Sun · Mater. Sci. Eng. A · 2012 · 541 · 110.1016/j.msea.2011.12.115 ↗
20. Van Slycken · Mater. Sci. Eng. A · 2007 · 460–461 · 51610.1016/j.msea.2007.01.075 ↗
21. Kuroda · Int. J. Solids Struct. · 2006 · 43 · 446510.1016/j.ijsolstr.2005.06.076 ↗
22. Meyer · J. Mater. Process. Technol. · 2007 · 182 · 31910.1016/j.jmatprotec.2006.07.040 ↗
23. Kim · Mater. Sci. Eng. A · 2013 · 559 · 22210.1016/j.msea.2012.08.087 ↗
24. Curtze · Mater. Sci. Eng. A · 2009 · 507 · 12410.1016/j.msea.2008.11.050 ↗
25. Seth · J. Mater. Process. Technol. · 2005 · 168 · 39010.1016/j.jmatprotec.2004.08.032 ↗
26. Dong · Acta Metall. Sin. · 2013 · 49 · 15910.3724/SP.J.1037.2012.00515 ↗
27. Wang · Mater. Des. · 2013 · 47 · 51010.1016/j.matdes.2012.12.068 ↗
28. Wei · Mater. Sci. Eng. A · 2007 · 465 · 26010.1016/j.msea.2007.02.126 ↗