Effect of pulsed electric current on dissolution of Mg 17 Al 12 phases in as-extruded AZ91 magnesium alloy
Source abstract
Abstract
Abstract In this study, the tensile deformation behavior of as-extruded AZ91 magnesium alloy under pulsed electric current has been investigated based on microstructural observations. The flow stress decreased and the elongation increased remarkably on applying electric current in comparison with non-pulsed tensile test at both room temperature and at 70 °C. The results of EBSD and EDS analysis showed that dissolution of the Mg17Al12 phase obviously occurs during pulsed tensile test due to thermal effect caused by Joule heating and athermal effect of electric current. To distinguish the athermal and thermal effects of electric current, the induction heat treatment (IHT) that follows the temperature cycle measured during pulsed tensile test was carried out using a dilatometer, which could control the temperature of specimen by an induction heater in a vacuum. Additionally, electropulsing treatment (EPT) was conducted and compared with the conventional heat treatment (CHT) under the same condition. The fraction of Mg17Al12 phase after pulsed tensile test and EPT was obviously lower in comparison with IHT and CHT, respectively. The results prove that applying electric current accelerates dissolution of Mg17Al12 phase in as-extruded AZ91 alloy with a distinct effect from Joule heating during deformation. It is proposed that electrically-assisted manufacturing (EAM) technique can improve the efficiency of forming process for as-extruded AZ91 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. TEM study of continuous precipitation in Mg–9 wt%Al–1 wt%Zn alloy10.1016/S1359-6454(00)00004-5 ↗
2. Effect of Mg17 Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy10.1016/j.msea.2009.05.032 ↗
3. Magnesium: properties—applications—potential10.1016/S0921-5093(00)01351-4 ↗
4. Research for a “new age of magnesium” in the automotive industry10.1016/S0924-0136(01)00780-4 ↗
5. An investigation of the properties of Mg-Zn-Al alloys10.1016/S1359-6462(98)00122-5 ↗
6. Fracture behavior of AZ91 magnesium alloy10.1016/S0167-577X(00)00041-0 ↗
7. Magnesium alloys and applications10.1179/mst.1994.10.1.1 ↗
8. Recent developments in light alloys10.2320/matertrans1989.37.12 ↗
9. Electroplasticity in metals and ceramics10.1016/S0921-5093(00)00786-3 ↗
10. Enhanced formability of 5754 alu11minum sheet metal using electric pulsing
11. Formability of Al 5xxx sheet metals using pulsed current for various heat treatments
12. N.T.Thien, N.T.Vinh, S.-T.Hong, M.-J.Kim, H.N.Han, F.Morestin, The effect of short duration electric current on the quasi-static tensile behavior of magnesium AZ31 alloy, Adv. Mater. Sci. Eng. Article ID 9560413.
13. Tensile formability enhancement of magnesium AZ31B-0 alloy using electrical pulsing
14. Influence of grain size and grain boundaries on the thermal and mechanical behavior of 70/30 brass under 405 electrically-assisted deformation10.1016/j.msea.2013.02.066 ↗
15. Characterization of flow stress for commercially pure titanium subjected to electrically-assisted deformation10.1115/1.4024394 ↗
16. Analysis and observations of current density sensitivity and thermally activated mechanical behavior in electrically-assisted deformation10.1115/1.4025882 ↗
17. Electric current-induced annealing during uniaxial tension of aluminum alloy10.1016/j.scriptamat.2013.11.019 ↗
18. Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg–9Al–1Zn alloy strip10.1016/j.msea.2011.03.095 ↗
19. Accelerated spheroidization induced by high intensity electric pulse in a severely deformed eutectoid steel10.1557/JMR.2010.0140 ↗
20. Effect of electric current density on the mechanical property of ultra-high strength steels under quasi-static tensile loads10.1007/s12541-014-0458-y ↗
21. Effect of electropulsing treatment on solid solution behavior of an aged Mg alloy AZ61 strip10.1557/JMR.2008.0328 ↗
22. Improved ductility of aged Mg-9Al-1Zn alloy strip by electropulsing treatment10.1557/jmr.2009.0197 ↗
23. Diffusive phase transformation in a Cu–Zn alloy under rapid heating by electropulsing10.1081/09500830410001664535 ↗
24. On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg 17 Al 12 phase in an aged Mg–9Al–1Zn alloy10.1016/j.actamat.2009.06.044 ↗
25. Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment10.1016/j.jallcom.2011.01.052 ↗
26. Effect of the electropulsing on mechanical properties and microstructure of an ECAPed AZ31 Mg alloy10.1557/JMR.2008.0204 ↗
27. Microstructure and electrical conductivity of Cu–Cr–Zr alloy aged with dc electric current10.1016/j.jallcom.2008.03.054 ↗
28. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension
29. Effects of dynamic electropulsing on microstructure and elongation of a Zn–Al alloy10.1016/j.msea.2008.09.080 ↗
30. ASTM International · 2011
31. Improvement of mechanical property of air plasma sprayed tungsten film using pulsed electric current treatment10.1016/j.ijrmhm.2016.07.001 ↗
32. Dissolution of Eutectic b-Mg17Al12 Phase in Magnesium AZ91 Cast Alloy at Temperatures Close to Eutectic Temperature10.1007/s11665-009-9539-y ↗
33. The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current10.1016/j.ijplas.2014.02.002 ↗
34. Die angle dependency of microstructural inhomogeneity in an indirect-extruded AZ31 magnesium alloy10.1016/j.jmatprotec.2015.05.003 ↗
35. Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy10.1016/j.jallcom.2007.02.045 ↗
36. Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy10.1016/j.msea.2007.02.029 ↗
37. Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D10.1023/A:1026351619636 ↗
38. Microstructures and dislocations in the stressed AZ91D magnesium alloys10.1016/S0921-5093(02)00413-6 ↗