Evolution of microstructure and grain refinement mechanism of pure nickel induced by laser shock peening
Source abstract
Abstract
Abstract This paper investigates microstructure evolution in laser shock peened pure nickel. The microstructure of the deformed layer produced by laser shock peening (LSP) was systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Results indicated that the amplitude and depth of micro-hardness in the surface layer increased with the number of laser impacts. A nanocrystalline layer was prepared in pure Ni after LSP and the LSP induced microstructures included dislocations (Ds), ultra-fine laminates (UFLs), ultra-fine grains (UFGs), nano-laminates (NLs), and nano-grains (NGs). Based on the in-depth microstructure observations, a grain refinement mechanism induced by LSP in pure Ni was proposed. The strengthening mechanism of micro-hardness induced by LSP could be attributed to the barriers of dislocation motion, including low-angle grain boundaries, large-angle grain boundaries and dislocation multiplication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Diamond and Carbon-based Materials Research · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Stress-dependent grain size evolution of nanocrystalline Ni-W and its impact on friction behavior10.1016/j.scriptamat.2016.05.009 ↗
2. Effect of surface nanocrystallization on the corrosion behavior of AISI 409 stainless steel10.1016/j.corsci.2010.07.004 ↗
3. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel10.1126/science.1242578 ↗
4. The mechanisms of thermal engineered laser shock peening for enhanced fatigue performance10.1016/j.actamat.2012.06.024 ↗
5. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
6. Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)10.1016/j.msea.2007.04.075 ↗
7. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
8. Nanocrystallization and amorphization mechanisms in Zr-X alloys during the ARB process10.2320/matertrans.45.2686 ↗
9. Nanostructure formation mechanism of a-titanium using SMAT10.1016/j.actamat.2004.05.023 ↗
10. Effect of surface mechanical attrition treatment on corrosion resistance of commercial pure titanium10.1016/j.surfcoat.2015.08.041 ↗
11. Microstructure evolution and strengthening mechanisms of pure titanium with nano-structured surface obtained by high energy shot peening10.1016/j.vacuum.2016.01.001 ↗
12. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
13. The limits of refinement by severe plastic deformation10.1002/adem.200600133 ↗
14. Effects of laser shock peening on the micro-hardness, tensile properties and fracture morphologies of CP-Ti alloy at different temperatures10.1016/j.apsusc.2017.05.202 ↗
15. A technique to decrease surface roughness in overlapping laser shock peening10.1016/j.apsusc.2016.02.138 ↗
16. Laser shock peening without coating induced residual stress distribution, wettability characteristics and enhanced pitting corrosion resistance of austenitic stainless steel10.1016/j.apsusc.2017.09.138 ↗
17. Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters10.1016/j.apsusc.2013.08.100 ↗
18. Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing10.1016/j.matdes.2015.07.039 ↗
19. Thermal stability of surface nanostructure produced by laser shock peening in a Ni-based superalloy10.1016/j.surfcoat.2017.01.031 ↗
20. Tensile properties and surface nanocrystallization analyses of H6210.1016/j.jallcom.2016.12.210 ↗
21. Laser shock peening induced surface nanocrystallization and martensite transformation in austenitic stainless steel10.1016/j.jallcom.2015.06.268 ↗
22. Laser shock peening effect on the dislocation transitions and grain refinement of Al-Mg-Si alloy10.1016/j.matchar.2014.08.020 ↗
23. Grain refinement of pure nickel using ECAP10.1016/S0921-5093(01)01404-6 ↗
24. Thermal stability and microstructural evolution in ultrafine-grained nickel after equal-channel angular pressing (ECAP)10.1007/s11661-002-0197-z ↗
25. Microhardness and microstructural evolution in pure nickel during high-pressure torsion10.1016/S1359-6462(01)00955-1 ↗
26. A numerical Fourier-analysis method for the correction of widths and shapes of lines on X-ray powder photographs10.1088/0959-5309/61/4/311 ↗
27. Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance10.1016/j.msea.2013.11.073 ↗
28. Dislocation evolution and properties enhancement of GH2036 by laser shock processing: dislocation dynamics simulation and experiment10.1016/j.msea.2015.12.007 ↗
29. Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy10.1016/j.ijfatigue.2017.04.016 ↗
30. Thermal stability of surface nano-crystallization layer in AZ91D magnesium alloy induced by laser shock peening10.1016/j.surfcoat.2017.09.037 ↗
31. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
32. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
33. Bimodal nanocrystallization of NiTi shape memory alloy by laser shock peening and post-deformation annealing10.1016/j.actamat.2011.07.070 ↗
34. Microstructure and strength of nickel at large strains10.1016/S1359-6454(00)00082-3 ↗
35. Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium10.1016/j.actamat.2010.05.007 ↗
36. Nanoscale structural refinement via deformation twinning in face-centered cubic metals10.1016/j.scriptamat.2009.02.008 ↗
37. Influence of mode of plastic straining on the microstructure of Ni and Ti deformed through rolling and torsion10.1016/j.matchar.2017.08.018 ↗
38. Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains10.1016/j.actamat.2008.07.040 ↗
39. Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion10.1016/j.actamat.2009.11.012 ↗
40. Microstructural evolution in adiabatic shear localization in stainless steel10.1016/S1359-6454(02)00526-8 ↗
41. Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing10.1016/j.actamat.2006.08.049 ↗
42. Hall–Petch and dislocation strengthening in graded nanostructured steel10.1016/j.actamat.2012.07.037 ↗
43. Nanocrystallization in the duplex Ti-6Al-4V alloy processed by multiple laser shock peening
44. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
45. Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
46. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
47. Quantification of the microstructures of high purity nickel subjected to dynamic plastic deformation10.1016/j.actamat.2011.11.035 ↗
48. Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains10.1016/S1359-6454(02)00174-X ↗
49. Cyclic high pressure torsion of nickel and Armco iron10.1080/14786430600838288 ↗
50. Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes10.1007/s10853-010-5122-z ↗
51. Microstructure and flow stress of polycrystals and single crystals10.1016/S1359-6454(97)00365-0 ↗
52. The deformation and ageing of mild steel: discussion of results10.1088/0370-1301/64/9/303 ↗
53. The cleavage strength of polycrystals
54. Strengthening mechanisms in nanostructured high-purity aluminum deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗