Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys
Source abstract
Abstract
Abstract An equi-atomic single-fcc-phase CrMnFeCoNi high entropy alloy (HEA) shows much higher tensile properties at cryogenic temperature than at room temperature because of its fcc characteristics and abundant twinning at cryogenic temperature. In order to further improve the cryogenic-temperature tensile properties of single-fcc-phase HEAs, we propose non-equi-atomic Fe-rich VCrMnFeCoNi HEAs, and analyze the strengthening effects of the brittle intermetallic sigma (σ) phase. The σ phase is unintentionally obtained, but favorably shows a pronounced strengthening by its hardness and grain refinement effect due to grain-boundary pinning, which leads to high yield and tensile strengths of 0.76 GPa and 1.23 GPa, respectively, together with good ductility of 54%. This positive utilization of the σ phase is unexpected because its formation has been suppressed in typical HEAs. Our results demonstrate that the present Fe-rich VCrMnFeCoNi design and σ-phase strengthening has potential in high-strength HEA studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
2. Absence of long-range chemical ordering in equimolar FeCoCrNi10.1063/1.4730327 ↗
3. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
4. Single-phase high-entropy alloys – an overview
5. Low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
6. Microstructure and compressive properties of NbTiVTaAlx high entropy alloys10.1016/j.proeng.2012.03.043 ↗
7. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
8. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures10.1080/21663831.2014.985855 ↗
9. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
10. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
11. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
12. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
13. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
14. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
15. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
16. Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloys10.1016/j.msea.2012.07.003 ↗
17. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
18. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
19. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
20. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
21. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
22. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
23. Microstructure and mechanical properties of CoCrFeNiTiAlx high-entropy alloys10.1016/j.msea.2008.12.053 ↗
24. Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying10.1007/s11661-010-0344-x ↗
25. Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys10.1016/j.jallcom.2008.07.124 ↗
26. Solid‐solution phase formation rules for multi‐component alloys10.1002/adem.200700240 ↗
27. Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys10.1016/j.actamat.2015.07.030 ↗
28. A high-entropy V35Ti35Fe15Cr10Zr5 alloy with excellent high-temperature strength10.1016/j.matdes.2017.02.029 ↗
29. Non-equiatomic high entropy alloys: approach towards rapid alloy screening and property-oriented design10.1016/j.msea.2015.09.010 ↗
30. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
31. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
32. Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys10.1016/j.wear.2009.10.013 ↗
33. From high-entropy alloys to high entropy steels10.1002/srin.201500133 ↗
34. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
35. Tensile properties of high-and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
36. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
37. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
38. de Boer · 1988
39. The thermo-calc databank system10.1016/0364-5916(85)90021-5 ↗
40. B.J. Lee, B. Sundman, TCFE2000: The Thermo-Calc Steels Database, KTH, Stockholm, 1999.
41. Thermodynamic calculation on the stability of (Fe, Mn)3 AlC carbide in high aluminum steels10.1016/j.jallcom.2010.06.032 ↗
42. Design of new face-cantered cubic high entropy alloys by thermodynamic calculation10.1007/s12540-017-6701-1 ↗
43. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
44. Isolation and testing of new single crystal superalloys using alloys-by-design method10.1016/j.msea.2016.04.089 ↗
45. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
46. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
47. A thermodynamic study on the V-C and Fe-V systems10.1016/0364-5916(91)90006-6 ↗
48. Effect of intermetallic precipitations on the properties of duplex stainless steel10.1016/j.matchar.2005.11.003 ↗
49. Overview of intermetallic sigma (σ) phase precipitaion in stainless steels10.1155/2012/154617 ↗
50. Gao · 2016
51. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
52. Compressive deformation behavior of CrMnFeCoNi high-entropy alloy10.1007/s12540-016-6304-2 ↗
53. Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system10.1016/j.jallcom.2013.12.210 ↗
54. Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys10.1016/j.jallcom.2014.12.157 ↗
55. Criterion for sigma phase formation in Cr- and V-containing high entropy alloys10.1080/21663831.2013.831382 ↗
56. Microstructure and thermal stability of a Ni-Cr-Co-Ti-V-Al high-entropy alloy coating by laser surface alloying10.1007/s12540-017-6583-2 ↗
57. Phase evolution, microstructure and mechanical properties of equi-atomic substituted TiZrHfNiCu and TiZrHfNiCuM (M = Co, Nb) high-entropy alloys10.1007/s12540-016-6034-5 ↗
58. Dependence of tensile deformation of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
59. Stacking fault energy and plastic deformation of fully austenitic high manganese steels: effect of Al addition10.1016/j.msea.2010.02.058 ↗
60. Deformation of single crystal hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
61. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗