journal article·2017-11

Synthesis of AlxCoCrFeNi high-entropy alloys by high-gravity combustion from oxides

R.X. Li, P.K. Liaw, Y. Zhang

Publisher page

Abstract

Abstract A new method for preparing high-entropy alloys (HEAs), combustion synthesis under high-gravity, is presented in this paper, including several highly-exothermic aluminothermic reactions. The microstructures and mechanical properties of the AlxCoCrFeNi HEAs prepared by the above method were investigated. With the increase of the Al content, the crystal structures evolved from face-centered cubic (FCC) to body-centered cubic (BCC) structures, which was proved to be in line with the previous results. The microstructure is strongly related to the synergistic effect of high gravity and Al contents. Massively-dispersive nano-precipitation had been found in the Al0.75CoCrFeNi alloy. The yield strength increases while the plasticity decreases with the increase of Al in AlxCoCrFeNi alloys. All those results confirmed that the new method was potentially a high-throughput technology, which could greatly shorten the processing period and reduce the energy consumption during the production of high performance materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Equation of state of an AlCoCrCuFeNi high-entropy alloy10.1007/s11837-015-1564-8 ↗
2. Progress in high-entropy alloys10.1007/s11837-015-1609-z ↗
3. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys10.1016/j.matlet.2015.11.016 ↗
6. Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures10.1016/j.jallcom.2013.11.084 ↗
7. Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer10.1016/j.jallcom.2014.03.050 ↗
8. Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys10.1016/j.jallcom.2010.03.111 ↗
9. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
10. Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy10.1016/j.intermet.2010.10.008 ↗
11. Solid solution alloys of AlCoCrFeNiTiX with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
12. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
13. A successful synthesis of the CoCrFeNiAl0.3 single-crystal, high-entropy alloy by Bridgman solidification
14. Solid solution coating of (TiVCrZrHf)N with unusual structural evolution10.1016/j.surfcoat.2012.11.077 ↗
15. The microstructure and phase equilibrium of new high performance high-entropy alloys10.1016/j.jallcom.2008.08.118 ↗
16. Microstructure characterization of laser clad TiVCrAlSi high entropy alloy coating on Ti-6Al-4V substrate10.4028/www.scientific.net/AMR.187.621 ↗
17. Electrochemical preparation and magnetic study of Bi-Fe-Co-Ni-Mn high entropy alloy10.1016/j.electacta.2008.06.036 ↗
18. Chemical state and phase structure of (TaNbTiW)N films prepared by combined magnetron sputtering and PBII10.1016/j.apsusc.2013.05.001 ↗
19. High-gravity combustion synthesis and in situ melt infiltration: a new method for preparing cemented carbides10.1016/j.scriptamat.2013.07.022 ↗
20. Preparation of Al2O3–ZrO2–SiO2 ceramic composites by high-gravity combustion synthesis10.1016/j.ijrmhm.2013.04.015 ↗
21. Microstructure evolution of ceramic materials during solidification from melts in high-gravity combustion synthesis10.1016/j.materresbull.2011.11.038 ↗
22. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
23. Microstructure and compressive properties of AlCrFeCoNi high entropy alloy10.1016/j.msea.2008.01.064 ↗
24. Cooling rate and size effect on the microstructure and mechanical properties of AlCoCrFeNi high entropy alloy