The effect of Mg and Si content on the microstructure, texture and bendability of Al–Mg–Si alloys
Source abstract
Abstract
Abstract In this paper, four model Al–Mg–Si automotive sheet alloys with different Mg and Si contents were prepared and heated treated to the same T4P temper (solution treated and pre-aged for 8 h at 75 °C and aged for 1 week at room temperature). The influence of the Mg and Si content on microstructure, crystallographic texture, tensile behavior and bendability was investigated. The evolution of microstructure and texture during thermomechanical processing was characterized. It was found that the bendability of sheets in the T4P temper decreases with raising Mg and Si content. The deterioration of bendability can be related to the decreased true fracture strain measured in tension. The fracture mode in the bend tests was found to be predominately transgranular. Crack initiation was observed at α-Al(FeMn)Si constituent particles and the propagation of cracks proceeded by a combination of shear bands and void growth/coalescence. Finally, the strength of the recrystallization texture increases was observed to increase with increasing Mg and Si contents and it was found that the relationship between crystallographic texture and the plastic anisotropy, e.g. r-value, could be predicted using the visco-plastic self-consistent (VPSC) polycrystal plasticity model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Advanced aluminium products and manufacturing technologies applied on vehicles presented at the EuroCarBody conference
2. Joost · Reducing vehicle weight and improving US energy efficiency using integrated computational materials engineering · 2012 · 64 · 1032
3. Electric vehicles spike demand for high strength aluminum extrusions
4. Recent development in aluminium for automotive applications10.1016/S1003-6326(14)63305-7 ↗
5. Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified
6. Influence of Mn on the negative natural aging effect in 6082 Al alloy10.1016/j.msea.2020.139874 ↗
7. Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al–Mg–Si alloy AA 601610.1016/j.msea.2019.05.073 ↗
8. Natural ageing clustering under different quenching conditions in an Al-Mg-Si alloy10.1016/j.scriptamat.2020.08.046 ↗
9. Quantified contribution of β″ and β′ precipitates to the strengthening of an aged Al–Mg–Si alloy10.1016/j.msea.2019.138776 ↗
10. Characterizing the hemming performance of automotive aluminum alloys with high-resolution topographic imaging10.1115/1.4027093 ↗
11. Aluminum alloy damage evolution for different strain paths – application to hemming process10.1016/j.engfracmech.2009.01.018 ↗
12. Microstructure controlled bending response in AA6016 Al alloys10.1016/j.msea.2011.05.055 ↗
13. The formation of bimodal grain size distribution in Al-Mg-Si-Cu alloy and its effect on the formability10.1016/j.matchar.2017.08.013 ↗
14. Improving bendability of Al–Mg–Si alloy sheet by minor alloying element addition
15. Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
16. Effect of microstructure and texture on forming behaviour of AA-6061 aluminium alloy sheet10.1016/j.msea.2016.10.027 ↗
17. Effects of crystal orientation on bendability of aluminum alloy sheet10.1016/j.msea.2011.01.048 ↗
18. The dependence of microstructure, texture evolution and mechanical properties of Al–Mg–Si–Cu alloy sheet on final cold rolling deformation10.1016/j.jallcom.2015.10.070 ↗
19. Effects of the Mg/Si ratio on microstructure, mechanical properties, and precipitation behavior of Al(-)Mg(-)Si(-)1.0 wt %-Zn alloys10.3390/ma11122591 ↗
20. Correlating r-value and through thickness texture in Al–Mg–Si alloy sheets10.1016/j.jallcom.2014.09.038 ↗
21. Effect of micro-voids on the crack initiation and propagation in the bending deformation of Al-Mg-Si alloy10.4028/www.scientific.net/MSF.794-796.325 ↗
22. Tensile properties and bendability of T4 treated AA6111 aluminum alloys10.1016/j.msea.2003.11.022 ↗
23. Influence of quenching rate and aging on bendability of AA6016 sheet10.1016/j.msea.2018.05.108 ↗
24. Strain localization and damage mechanisms during bending of AA6016 sheet10.1016/j.msea.2012.09.028 ↗
25. Himuro · 2004 · 464
26. Strain localization and damage development during bending of Al–Mg alloy sheets10.1016/j.msea.2012.04.093 ↗
27. Aluminium sheet for automotive applications
28. Effects of pre-aging and natural aging on the clusters, strength and hemming performance of AA6014 alloys10.1016/j.msea.2020.139206 ↗
29. Gmw15421 · 2013
30. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
31. The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals10.1016/0001-6160(84)90222-0 ↗
32. The effect of iron content on the iron-containing intermetallic phases in a cast 6060 aluminum alloy10.1007/s11661-010-0595-6 ↗
33. Characterization of Fe-rich intermetallic phases in a 6xxx series Al alloy10.4028/www.scientific.net/MSF.519-521.1721 ↗
34. Influences of Fe, Si and homogenization on electrical conductivity and mechanical properties of dilute Al-Mg-Si alloy10.1016/j.jallcom.2016.01.110 ↗
35. Quantification of the evolution of the 3D intermetallic structure in a 6005A aluminium alloy during a homogenisation treatment10.1016/S1044-5803(02)00289-9 ↗
36. The interaction between Mn and Fe on the precipitation of Mn/Fe dispersoids in Al-Mg-Si-Mn-Fe alloys10.1016/j.scriptamat.2018.04.012 ↗
37. Texture control by thermomechanical processing of AA6xxx Al–Mg–Si sheet alloys for automotive applications—a review10.1016/S0921-5093(01)01968-2 ↗
38. Effect of heating rate during solution treatment on the bendability of Al–Mg–Si alloys10.1016/j.msea.2020.139604 ↗
39. Effects of Mg and Si contents on the microstructure and mechanical properties of AA6014 alloys in T4P and T6P temper10.1016/j.msea.2018.10.043 ↗
40. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
41. Humphreys · 2012
42. Study of the recrystallization process of AlMgSi alloys containing transition elements10.1016/j.jallcom.2009.06.207 ↗
43. Texture and plastic anisotropy of Al-Mg-0.3 Cu-1.0 Zn alloys10.1016/S1359-6462(97)00102-4 ↗
44. Prillhofer · 2014 · 227
45. Texture and correlation between R-value and formability of aluminum alloy sheet10.4028/www.scientific.net/MSF.702-703.356 ↗
46. Effect of heating rate on mechanical property, microstructure and texture evolution of Al–Mg–Si–Cu alloy during solution treatment10.1016/j.msea.2014.10.045 ↗
47. Effect of Zn addition on the microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloys10.1016/j.msea.2016.09.084 ↗
48. The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy10.1016/j.msea.2019.03.015 ↗
49. Correlation of bendability of materials with their tensile properties10.1115/1.3664236 ↗
50. Effects of Si on the aging behaviour and formability of aluminium alloys based on AA601610.1016/S0921-5093(01)00969-8 ↗
51. Micromechanics of room and high temperature fracture in 6xxx Al alloys10.1016/j.pmatsci.2006.06.001 ↗
52. The influence of iron content on the bendability of AA6111 sheet10.1016/S0921-5093(03)00535-5 ↗
53. Assessment of yield and fracture criteria using shear and bending tests10.1016/j.matdes.2008.05.045 ↗
54. Bendability enhancement of an age-hardenable aluminum alloy: Part I — relationship between microstructure, plastic deformation and fracture10.1016/j.msea.2019.03.053 ↗