Mechanical behavior of tempered martensite: Characterization and modeling
Source abstract
Abstract
Abstract Mechanical characterization of five low-carbon martensitic steels tempered at a wide range of temperatures and times was performed. Analysis of the relationships between mechanical properties, hardness and tempering conditions was completed. Microstructural observations revealed the precipitation of carbides and consequent decrease of carbon in solid solution with tempering. To describe the mechanical behavior of tempered martensite, a simplified Continuous Composite model, reported previously, was adapted. A good agreement between the model and the experimental stress-strain curves was achieved with only one fitting parameter. Further directions for improvement of the model were also proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A history of martensite: some thoughts on the early hardening of iron
2. A history of martensite: early ideas on the structure of steel
3. Thermodynamics and kinetics of martensitic transformations10.1016/0502-8205(58)90005-4 ↗
4. Wayman · 1964
5. The morphology of martensite in iron alloys10.1007/BF02814873 ↗
6. The kinetics of martensite formation in steel10.1007/BF02814877 ↗
7. The growth of martensite since E.C. Bain (1924) – some milestones10.4028/www.scientific.net/MSF.56-58.1 ↗
8. Martensite in steel: strength and structure
9. Tempering of steel10.1007/BF02642436 ↗
10. Tempering of low-carbon martensite
11. The tempering of Fe-C lath martensite10.1007/BF02647041 ↗
12. The effect of structure in the deformation of as-quenched and tempered martenside in an Fe-0.2Pct C alloy10.1007/BF02644037 ↗
13. Hardness of tempered martensite in carbon and low-alloy steels10.1007/BF02646882 ↗
14. Hollomon · 1945 · 223
15. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
16. Microstructural heterogeneity and its relationship to the strength of martensite10.1016/j.msea.2015.04.088 ↗
17. Control of cementite precipitation in lath martensite by rapid heating and tempering10.2355/isijinternational.44.1937 ↗
18. Microstructures and hardness of as-quenched martensites (0.1-0.5%C)10.1016/j.actamat.2011.05.061 ↗
19. Study of tempering behaviour of lath martensite using in situ neutron diffraction10.1016/j.matchar.2015.06.040 ↗
20. Morphology, crystallography, and crack paths of tempered lath martensite in a medium-carbon low-alloy steel10.1016/j.msea.2016.05.041 ↗
21. Prior austenite grain size and tempering effects on the dislocation of low-C Nb-Ti microalloyed lath martensite10.1016/j.scriptamat.2015.05.036 ↗
22. G. Masing, Zur Heyn’schen Theorie der Verfestigung der Metalle durch verborgen elastische Spannungen, Wissenschaftliche Veröffentlichungen aus dem Siemens-Konzern 3, 1923, pp. 231–239.10.1007/978-3-642-99663-4_17 ↗
23. The Bauschinger effect in copper10.1016/0001-6160(81)90110-3 ↗
24. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
25. The hysteresis loop 1. A statistical theory10.1111/j.1460-2695.1982.tb01221.x ↗
26. The hysteresis loop 2. An analysis of the loop shape10.1111/j.1460-2695.1982.tb01222.x ↗
27. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe-0.6 mass%C martensite10.1016/j.actamat.2007.05.023 ↗
28. Rate-controlling parameters in the coarsening kinetics of cementite in Fe-0.6C steels during tempering10.1016/j.scriptamat.2010.04.002 ↗
29. Toward a new interpretation of the mechanical behaviour of as-quenched low alloyed martensitic steels10.2355/isijinternational.52.717 ↗
30. Characterization and modeling of manganese effect on strength and strain hardening of martensitic carbon steels10.2355/isijinternational.53.1076 ↗
31. Precipitation of carbides in low-carbon Fe-Al-C alloys10.1007/BF02646383 ↗