Grain morphology evolution and mechanical strength change of intermetallic joints formed in Ni/Sn/Cu system with variety of transient liquid phase soldering temperatures
Source abstract
Abstract
Abstract The grain morphology evolution and mechanical strength change of the intermetallic joints formed in a Ni/Sn/Cu system by the transient liquid phase (TLP) soldering at 260 °C, 300 °C and 340 °C were investigated. The grain morphology evolution of the (Cu, Ni)6Sn5 intermetallic compounds (IMCs) was highly correlated with the Ni concentration gradient across the joints and strongly affected by the soldering temperatures, which was analyzed in detail from the aspect of thermodynamics. The shear strengths of the three types of intermetallic joints were 49.8 MPa, 50.3 MPa and 42.7 MPa, respectively. The correlation between the grain morphology evolution and the mechanical strength change of the intermetallic joints was revealed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Development of reliable low temperature wafer level hermetic bonding using composite seal joint10.1016/j.microrel.2011.10.027 ↗
2. A comparative study of Cn/Sn/Cu and Ni/Sn/Ni solder joints for low temperature stable transient liquid phase bonding10.1016/j.scriptamat.2015.07.032 ↗
3. Rapid formation of intermetallic joints through ultrasonic-assisted die bonding with Sn-0.7Cu solder for high temperature packaging application10.1016/j.scriptamat.2015.07.036 ↗
4. Rapid formation of Cu/Cu3Sn/Cu joints using ultrasonic bonding process at ambient temperature10.1063/1.4794684 ↗
5. Ultrarapid formation of homogeneous Cu6Sn5 and Cu3Sn intermetallic compound joints at room temperature using ultrasonic waves10.1016/j.ultsonch.2013.09.020 ↗
6. State of the art of high temperature power electronics10.1016/j.mseb.2010.10.003 ↗
7. Microstructure evolution and mechanical properties of transient liquid phase bonded Ti-6Al-4V joint with copper interlayer10.1016/j.matdes.2015.11.103 ↗
8. Microstructure, mechanical properties and mechanism of ultrasound-assisted rapid transient liquid phase bonding of magnesium alloy in air10.1016/j.matdes.2015.11.071 ↗
9. Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process10.1016/j.actamat.2010.10.053 ↗
10. Study on the microstructure and mechanical properties of Cu-Sn intermetallic joints rapidly formed by ultrasonic-assisted transient liquid phase soldering10.1016/j.jallcom.2016.08.263 ↗
11. Non-interfacial growth of Cu3Sn in Cu/Sn/Cu joints during ultrasonic-assisted transient liquid phase soldering process10.1016/j.matlet.2016.10.017 ↗
12. Phase-field simulations of intermetallic compound growth in Cu/Sn/Cu sandwich structure under transient liquid phase bonding conditions10.1016/j.actamat.2012.07.063 ↗
13. Kinetics of Ag3Sn growth in Ag-Sn-Ag system during transient liquid phase soldering process10.1016/j.actamat.2010.02.018 ↗
14. Rapid formation of Ni3Sn4 joints for die attachment of SiC-based high temperature power devices using ultrasound-induced transient liquid phase bonding process10.1016/j.ultsonch.2016.12.026 ↗
15. The effect of a concentration gradient on interfacial reactions in microbumps of Ni/SnAg/Cu during liquid-state soldering10.1016/j.scriptamat.2012.01.046 ↗
16. Asymmetrical solder microstructure in Ni/Sn/Cu solder joint10.1016/j.scriptamat.2006.04.027 ↗
17. Kinetic analysis of the interfacial reactions in Ni/Sn/Cu sandwich structures10.1007/s11664-006-0299-2 ↗
18. Morphology and growth pattern transition of intermetallic compounds between Cu and Sn-3.5Ag containing a small amount of additives10.1007/s11664-006-0317-4 ↗
19. The influence of Ni and Zn additions on microstructure and phase transformations in Sn-0.7Cu/Cu solder joints10.1016/j.actamat.2014.10.003 ↗
20. The influence of ageing on the stabilisation of interfacial (Cu,Ni)6(Sn,Zn)5 and (Cu,Au,Ni)6Sn5 intermetallics in Pb-free Ball Grid Array (BGA) solder joints10.1016/j.jallcom.2016.05.263 ↗
21. Effect of dissolution and intermetallic formation on the reliability of FC joints10.1108/13565369810215582 ↗
22. Use of multicomponent phase diagrams for predicting phase evolution in solder/conductor systems10.1007/s11664-001-0212-y ↗
23. Phase equilibria in the Sn-Rich corner of the Sn-Cu-Ni ternary alloy system at 240°C10.1557/JMR.2005.0391 ↗
24. Mechanism of interfacial reaction for the Sn-Pb solder bump with Ni/Cu under-bump metallization in flip-chip technology10.1007/s11664-004-0113-y ↗
25. Study of interaction between Cu-Sn and Ni-Sn interfacial reactions by Ni-Sn3.5Ag-Cu sandwich structure10.1007/s11664-003-0027-0 ↗
26. Ni segregation in the interfacial (Cu,Ni)6Sn5 intermetallic layer of Sn-0.7Cu-0.05Ni/Cu ball grid array (BGA) joints10.1016/j.intermet.2014.05.004 ↗
27. Ni interdiffusion coefficient and activation energy in Cu6Sn510.1007/s11664-011-1821-8 ↗
28. Effects of addition participation in the interfacial reaction on the growth patterns of Cu6Sn5-based IMCs during reflow process10.1016/j.jallcom.2005.11.030 ↗
29. Grain morphology of intermetallic compounds at solder joints10.1557/JMR.2002.0084 ↗
30. Effect of interfacial reaction in Sn-Ag-Cu solder alloy with Ni addition10.4028/www.scientific.net/KEM.462-463.247 ↗
31. Dissolution and interfacial reactions of thin-film Ti/Ni/Ag metallizations in solder joints10.1016/S1359-6454(01)00187-2 ↗
32. Cu6Sn5 precipitation during Sn-based solder/Cu joint solidification and its effects on the growth of interfacial intermetallic compounds10.1016/j.jallcom.2013.08.013 ↗
33. Growth characteristics and formation mechanisms of Cu6Sn5 phase at the liquid-Sn0.7Cu/(111)Cu and liquid-Sn0.7Cu/(001)Cu joint interfaces10.1016/j.actamat.2015.11.034 ↗
34. Formation mechanism and orientation of Cu3Sn grains in Cu-Sn intermetallic compound joints10.1016/j.matlet.2013.07.116 ↗
35. Critical properties of Cu6Sn5 in electronic devices: recent progress and a review10.1016/j.cossms.2015.08.001 ↗