A novel methodology for the prediction of the stress–strain response of laser powder bed fusion lattice structure based on a multi-scale approach
Source abstract
Abstract
Additive manufacturing (AM), and in particular laser powder bed fusion (LPBF), is a technology that allows to easily produce geometrically complex structural components. Among others, an example is represented by lattice structures which allow to obtain lightweight components with enhanced mechanical properties. Despite a large number of papers available in the literature, mechanical behavior of lattice structures made by LPBF is still difficult to predict, due to microstructure modifications induced by their small features, scanning strategy and building direction. In this regard, a multi-scale approach to predict the effective response within the lattice structure is proposed in this investigation. It mainly consists in local measurements by nano-indentation tests, carried out at different portion of the lattice structure and along different orientation to build the effective constitutive response of the component. In this way, possible modifications induced by the LPBF process within the microstructure can be captured. Relying on experimental investigations at both macro and nano-scale, a numerical model for stainless steel 316L octet-truss lattice specimen has been calibrated. To improve the accuracy of the simulations, the geometrical model was built starting from the real geometry of the component through micro-CT images. Obtained results revealed that using the as-built geometry and effective local properties is fundamental for an accurate prediction of the mechanical behavior of lattice structures made by LPBF manufacturing process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. SLM lattice structures: Properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
2. Design and additive manufacturing of cellular lattice structures
3. Acta Biomaterialia Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
4. Additively-manufactured anisotropic and isotropic 3D plate-lattice materials for enhanced mechanical performance: Simulations and experiments10.1016/j.actamat.2020.08.063 ↗
5. Mechanical properties of alloy Ti – 6Al – 4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures10.1179/1743290114Y.0000000092 ↗
6. Multiaxial plasticity and fracture behavior of stainless steel 316L by laser powder bed fusion: Experiments and computational modeling10.1016/j.actamat.2020.08.066 ↗
7. Fatigue strength of additively manufactured 316L austenitic stainless steel10.1016/j.actamat.2020.08.033 ↗
8. Influence of process parameters on surface roughness of aluminum parts produced by DMLS10.1007/s00170-012-4688-9 ↗
9. On the role of melt flow into the surface structure and porosity development during selective laser melting10.1016/j.actamat.2015.06.004 ↗
10. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
11. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting10.1016/j.engfracmech.2014.03.008 ↗
12. Mechanical behavior of selective laser melted 316L stainless steel10.1016/j.msea.2017.04.058 ↗
13. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
14. Microstructural characterization of the anisotropy and cyclic deformation behavior of selective laser melted AlSi10Mg structures10.3390/met8100825 ↗
15. The development of grain structure during additive manufacturing10.1016/j.actamat.2021.116862 ↗
16. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
17. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
18. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
19. Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting10.1016/j.jallcom.2015.01.249 ↗
20. Tensile properties , strain rate sensitivity , and activation volume of additively manufactured 316L stainless steels10.1016/j.ijplas.2019.05.009 ↗
21. Strengthening mechanisms in directed energy deposited austenitic stainless steel10.1016/j.actamat.2018.11.021 ↗
22. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
23. Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel10.1007/s11837-016-1822-4 ↗
24. The microstructure, mechanical properties and corrosion resistance of 316 L stainless steel fabricated using laser engineered net shaping10.1016/j.msea.2016.09.028 ↗
25. Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes10.1016/j.scriptamat.2019.10.005 ↗
26. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
27. Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process10.1016/j.msea.2018.08.069 ↗
28. Effect of scanning strategy on texture formation in Ni-25 at .% Mo alloys10.1016/j.matdes.2017.11.060 ↗
29. Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting)
30. Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel10.1016/j.msea.2018.10.051 ↗
31. Single – crystalline – like stainless steel 316L with different geometries fabricated by laser powder bed fusion10.1007/s40964-020-00123-9 ↗
32. Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting10.1016/j.scriptamat.2018.09.017 ↗
33. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel
34. On the limitations of volumetric energy density as a design parameter for selective laser melting10.1016/j.matdes.2016.10.037 ↗
35. Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures10.1016/j.matdes.2019.108164 ↗
36. Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: A review
37. The effects of geometry and laser power on the porosity and melt pool formation in additively manufactured 316L stainless steel10.1007/s00170-020-06196-8 ↗
38. In situ heat accumulation by geometrical features obstructing heat flux and by reduced inter layer times in laser powder bed fusion of AISI 316L stainless steel10.1016/j.procir.2020.09.030 ↗
39. Computed tomography for characterization of fatigue performance of selective laser melted parts10.1016/j.matdes.2015.06.063 ↗
40. Measurement and characterization of porosity in aluminium selective laser melting parts using X-ray CT10.1080/17452759.2015.1112412 ↗
41. Porosity testing methods for the quality assessment of selective laser melted parts10.1016/j.cirp.2016.04.054 ↗
42. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
43. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches10.1016/j.actamat.2018.08.030 ↗
44. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti – 6Al – 4V10.1016/j.msea.2013.04.099 ↗
45. Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V
46. Modeling and experimental validation of an immersed thermo-mechanical part-scale analysis for laser powder bed fusion processes
47. Strain concentrations in BCC micro lattices obtained by AM10.1016/j.prostr.2017.11.074 ↗
48. Analysis of strain and stress concentrations in micro-lattice structures manufactured by SLM10.1108/RPJ-10-2018-0270 ↗
49. Experimental and numerical investigation on compressive fatigue strength of lattice structures of AlSi7Mg manufactured by SLM10.1016/j.ijfatigue.2019.06.041 ↗
50. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
51. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
52. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing10.1016/j.msea.2005.03.082 ↗
53. Macro- and micromechanical behavior of 316LN lattice structures manufactured by electron beam melting10.1007/s11665-019-04484-3 ↗
54. Indentation size effects in crystalline materials: A law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
55. Experimental and numerical evaluation of mechanical properties of 3D-printed stainless steel 316L lattice structures10.1007/s11665-021-05737-w ↗
56. ISO 14577-1:2015, Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method.
57. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
58. Correlation between hardness and tensile properties in ultra-high strength dual phase steels – short communication
59. The determination of yield strength from hardness measurements10.1007/BF02913433 ↗
60. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
61. Computational modeling of the forward and reverse problems in instrumented sharp indentation10.1016/S1359-6454(01)00295-6 ↗
62. Kick · 1885
63. 2019
64. Numerical and experimental study of the effect of artificial porosity in a lattice structure manufactured by laser based powder bed fusion
65. Virtual testing of geometrically imperfect additively manufactured lattice structures10.1002/pamm.202000090 ↗
66. Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures
67. Bending behavior of octet-truss lattice structures: Modelling options, numerical characterization and experimental validation10.1016/j.matdes.2021.109693 ↗
68. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts10.1016/j.matdes.2016.03.111 ↗
69. Investigation into the Effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
70. Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting10.1016/j.apsusc.2010.02.030 ↗
71. Effects of porosity on the mechanical properties of additively manufactured components: a critical review10.1088/2053-1591/abcc5d ↗
72. The effect of energy density and porosity structure on tensile properties of 316L stainless steel produced by laser powder bed fusion10.1007/s40964-022-00281-y ↗
73. A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion10.1007/s10853-022-06990-7 ↗