Robust bonding and microstructure behavior of aluminum/high-strength steel lap joints using resistance element welding process for lightweight vehicles: Experimental and numerical investigation
Source abstract
Abstract
Abstract Here we present the resistance element welding (REW) process as a novel alternative to aluminum (Al)/steel (Fe) joints for the automotive structural assembly process. Before the REW process on the SPFC980 steels and AA5052 alloys, the low-carbon steel, S20C elements were riveted to AA5052 sheets to resolve the inconsistency of properties between Al and Fe. The REW processes were conducted with the 6 input parameters from 3.5 kA to 12 kA with a welding current under 200 ms of an energization time. As a result, robust bonding was successfully achieved exceeding 9 kN of tensile-shear strengths with excellent failure energies from the welding currents in 6.5 kA–10.5 kA without any common weld defects, e.g., crack, lack of fusion, lack of penetration, undercut, etc. These results present exceptional characteristics compared with the strength of previous reported Al/Fe joining technologies. The crystallographic characteristics of the welded metals in this process were quantitatively investigated using electron backscatter diffraction (EBSD) analysis. Due to the cooling effect the phase transformation was verified by theoretical values and finite element method (FEM) computational calculation. Furthermore, the fracture behavior analysis was thoroughly performed using the in-situ digital image correlation (DIC) method. This study provides a substantial alternative to achieve robust bonding of the automotive structural Al alloy/high tensile steel through the REW process and can be extended to mass production of lightweight structural assembly applications as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable10.1016/j.jmrt.2019.02.012 ↗
2. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
3. A synchrotron look at steel10.1126/science.1078210 ↗
4. Formability behavior of Al/steel MIG arc brazed-fusion welded joint10.1016/j.jmatprotec.2019.116255 ↗
5. Effect of tool geometry in dissimilar Al-steel friction stir welding
6. Microstructure inhomogeneity of dissimilar steel/Al butt joints produced by laser offset welding10.1016/j.jmapro.2020.01.011 ↗
7. Interfacial microstructures and mechanical properties of friction welded Al/steel dissimilar joints10.1016/j.jmapro.2019.11.009 ↗
8. Multi-scale mechanical modeling of Al-steel resistance spot welds10.1016/j.msea.2018.08.039 ↗
9. Influencing mechanism of inherent aluminum oxide film on coach peel performance of baked Al-Steel RSW10.1016/j.matdes.2020.109250 ↗
10. Microstructure and mechanical properties of Al/steel dissimilar welds fabricated by friction surfacing assisted friction stir lap welding10.1016/j.jmrt.2019.10.046 ↗
11. Laser beam joining of Al/steel dissimilar metals with Sn-Zn filler wire in overlap configuration10.1016/j.jmapro.2020.10.079 ↗
12. Material flow and mechanical properties of aluminum-to-steel self-riveting friction stir lap joints10.1016/j.jmatprotec.2018.08.011 ↗
13. Self-pierce riveting of multiple steel and aluminium alloy sheets10.1016/j.jmatprotec.2013.09.007 ↗
14. Peak load and energy absorption of DP600 advanced steel resistance spot welds10.1080/03019233.2016.1229880 ↗
15. Modeling and optimization of resistance spot welded aluminum to Al-Si coated boron steel using response surface methodology and genetic algorithm10.1016/j.measurement.2020.108766 ↗
16. The robustness of Al-steel resistance spot welding process10.1016/j.jmapro.2019.02.030 ↗
17. Joint formation mechanism and performance of resistance rivet welding (RRW) for aluminum alloy and press hardened steel10.1016/j.jmatprotec.2020.116830 ↗
18. Joining lightweight components by short-time resistance spot welding10.1007/s40194-016-0398-5 ↗
19. Theory of the effect of dynamic strain aging on mechanical properties10.1002/pssa.2210300120 ↗
20. The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting10.1016/j.matchar.2021.111198 ↗
21. Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel10.1016/j.jmatprotec.2008.11.017 ↗
22. Study on shear behavior of riveted lap joints of aircraft fuselage with different hole diameters and squeeze forces10.1016/j.engfailanal.2021.105499 ↗
23. Gould · 2006 · 85
24. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗
25. Critical assessment: martensite-start temperature for the γ → ε transformation, Calphad Comput10.1016/j.calphad.2011.10.008 ↗
26. Austenite grain size and the martensite-start temperature10.1016/j.scriptamat.2008.11.043 ↗
27. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
28. Microstructure, mechanical properties, and damping capacity in stir zone after friction stir welding of Fe–17Mn damping alloy10.1016/j.jallcom.2019.06.367 ↗
29. Effect of resistance spot welding parameters on weld pool properties in a DP600 dual-phase steel: a parametric study using thermomechanically-coupled finite element analysis10.1016/j.matdes.2013.11.026 ↗
30. Dynamic strain ageing in iron alloys: the shielding effect of carbon10.1016/j.actamat.2016.04.018 ↗
31. Microstructure evolution and mechanical behavior of a binary Al-7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
32. High ductility bulk nanostructured Al-Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
33. Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique10.1016/j.matdes.2012.12.007 ↗
34. High-productivity and high-strength Fe/Al dissimilar metal joining by spot forge welding10.1016/j.matlet.2020.128412 ↗
35. Joining TWIP to TWIP and TWIP to aluminium: a comparative study between joining processes, joint properties and mechanical performance10.1016/j.jmapro.2017.09.012 ↗