The onset of tensile residual stresses in grinding of hardened steels
Source abstract
Abstract
Abstract Residual stress distributions produced by grinding with various conditions have been measured for four steels BS En9, BS En31, AISI M2 and CPM 10V (a trade name for AISI A11), using neutron and X-ray diffraction techniques. The residual stress profiles were found to have the maximum stress magnitude on the surface, which could be compressive or tensile depending on the grinding conditions used. By using experimentally-determined data for the maximum grinding surface temperature, it was found that tensile residual stresses are generated after the grinding temperature reaches a critical level, which was 200 °C for both En9 and En31; 500 °C for M2; and 600 °C for CPM 10V. For all these steels, tensile stresses can result under grinding conditions at which damage such as overtempering or rehardening does not occur. The softening behaviour during overtempering was characterized by means of the Hollomon–Jaffe time–temperature parameter. It was concluded that among the three primary origins of residual grinding stresses—mechanical deformation (Hertzian load), thermally-induced plastic deformation, and phase transformations—it is the mechanical deformation and thermally-induced plastic deformation effects that cause the onset of tensile residual stresses when grinding these quenched and tempered steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M. Field, W.P. Koster, J.B. Kohls, R.E. Snider, J.J. Maranchik, Report No. AFMDC 70–1, Air Force Machinibility Data Center, 1970.
2. Dölle · Metall. Mater. Trans. · 1980 · 11A · 15910.1007/BF02700452 ↗
3. El-Helieby · Wear · 1980 · 58 · 15510.1016/0043-1648(80)90220-3 ↗
4. S. Malkin, Grinding Technology Theory and Applications of Machining with Abrasives, Ellis Horwood, Chichester, UK, 1989.
5. M.C. Shaw, Principles of Abrasive Processing, Oxford Science Publications, Oxford, UK, 1996.
6. Snoeys · Ann. CIRP · 1978 · 27 · 571
7. K. Neailey, Met. Mater. (1988) 141.
8. Mahdi · Comput. Mech. · 2000 · 26 · 14810.1007/s004660000162 ↗
9. R.W.K. Honeycombe, H.K.D.H. Bhadeshia, Steels Microstructure and Properties, Edward Arnold, London, 1995.
10. Chen · Abrasive Mag. · 2000 · 2–3 · 28
11. Chen · J. Mater. Process Technol. · 2000 · 107 · 21610.1016/S0924-0136(00)00692-0 ↗
12. Xiao · J. Manuf. Sci. Eng. Trans. ASME · 2002 · 124 · 83310.1115/1.1510519 ↗
13. D.F. McCormack, W.B. Rowe, X. Chen, A. Bouzina, M.E. Fitzpatrick, L. Edwards, in: Proceedings of the 6th International Conference on Residual Stresses, Oxford, UK, 2000, Institute of Materials, London, UK, 2000, p. 225.
14. Krauss · Metall. Mater. Trans. B · 2001 · 32 · 20510.1007/s11663-001-0044-4 ↗
15. Macherauch · Z. Angewandte Phys. · 1961 · 13 · 305
16. I.C. Noyan, J.B. Cohen, Residual Stress, Springer-Verlag, New York, 1987.10.1007/978-1-4613-9570-6 ↗
17. W. Pfeiffer, in: Proceedings of the 4th International Conference on Residual Stresses, Baltimore, MA, 1994, Society for Experimental Mechanics, Bethel, CT, 1994, p. 148.
18. Moore · SAE Trans. · 1958 · 66 · 340
19. Warren · J. Appl. Phys. · 1950 · 21 · 59510.1063/1.1699713 ↗
20. J.M. Sprauel, in: M.E. Fitzpatrick, A. Lodini (Eds.), Analysis of Residual Stress using Neutron and Synchrotron Radiation, Taylor & Francis, London, UK, 2003, p. 78.10.1201/9780203608999.ch5 ↗
21. Johnson · Physica B · 1997 · 234 · 114110.1016/S0921-4526(97)89272-1 ↗
22. L. Edwards, in: M.E. Fitzpatrick, A. Lodini (Eds.), Analysis of Residual Stress using Neutron and Synchrotron Radiation, Taylor & Francis, London, 2003, p. 233.10.1201/9780203608999.ch14 ↗
23. D.Q. Wang, L. Edwards, in: Proceedings of the Fourth European Conference on Residual Stresses, Cluny-en-Bourgogne, France, ENSAM, Paris, 1996, p. 135.
24. Von Dreele · J. Appl. Cryst. · 1982 · 15 · 58110.1107/S0021889882012722 ↗
25. Poggie · Wear · 1991 · 149 · 20910.1016/0043-1648(91)90374-4 ↗
26. Eigenmann · Z. Metall. · 1995 · 86 · 84
27. H.G. Priesmeyer, in: M.T. Hutchings, A.D. Krawitz (Eds.), Measurement of Residual and Applied Stress Using Neutron Diffraction, Kluwer Academic Publishers, London, 1992, p. 277.10.1007/978-94-011-2797-4_18 ↗
28. Saeglitz · Metall. Mater. Trans. · 1997 · 28A · 37710.1007/s11661-997-0139-x ↗
29. Hollomon · Trans. ASM · 1945 · 162 · 223
30. Grange · Trans. ASM · 1956 · 48 · 165
31. Littmann · Trans. ASM · 1955 · 47 · 692
32. Roberts · Trans. ASM · 1947 · 39 · 521
33. Lou · Metall. Mater. Trans. · 1983 · 14A · 188910.1007/BF02645560 ↗
34. K.E. Thelning, Steel and its Heat Treatment, Butterworths, London, UK, 1984.
35. http://www.cintool.com/M10.htm, Cincinnati Tool Steel Company, Accessed 14 November 2002.
36. Grobe · Trans. ASM · 1953 · 45 · 475
37. Rowe · Ann. CIRP · 1988 · 37 · 32710.1016/S0007-8506(07)61646-1 ↗