The evolution of ultrafine ferrite formation through dynamic strain-induced transformation
Source abstract
Abstract
Abstract Hot torsion testing of a C–Mn–V steel was used to study the evolution of ultrafine ferrite (UFF) formation by dynamic strain-induced transformation (DSIT) in conjunction with air-cooling for two prior austenite grain sizes. This study evaluated not only the evolution of DSIT ferrite during straining, but also the grain growth behaviour of DSIT ferrite grains during post-deformation cooling. For both austenite grain sizes, the DSIT ferrite initially nucleated on/or near prior austenite grain boundaries at an early stage of transformation followed by the grain interiors. The prior austenite grain size affected the distribution of DSIT ferrite nucleation sites at an early stage of transformation and the subsequent coarsening behaviour of the grain boundary (GB) and the intragranular ferrite (IG) grains during post-deformation cooling. For the fine prior austenite grain size, the distribution of DSIT ferrite grains was more homogenous compared with the coarse austenite and the coarsening occurred not only in the GB ferrite grains but also in the IG ferrite grains. However, the ferrite coarsening mostly occurred for the IG ferrite rather than the GB ferrite grains in the coarse austenite. The result suggests that normal grain growth occurred during the overall transformation in the GB ferrite grains for the coarse initial austenite grain size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. R.K. Gibbs, P.D. Hodgson, B.A. Parker, in: P.K. Liaw, J.R. Weertman, H.L. Marcus, J.S. Santner (Eds.), Morris E. Fine symposium, The Minerals, Met. Mater. Soc., TMS, USA, 1991, p. 73.
2. A. Yoshi, M. Fujioka, H. Morikawa, Y. Onoe, in: I. Tamura (Ed.), Thermec’88, vol. 1, The Iron and Steel Institute of Japan, Tokyo, 1988, p. 799.
3. Priestner · Mater. Sci. Technol. · 1992 · 8 · 84910.1179/mst.1992.8.10.849 ↗
4. Bengochea · Metall. Mater. Trans. A · 1998 · 29 · 41710.1007/s11661-998-0122-1 ↗
5. Priestner · Met. Technol. · 1980 · 7 · 30910.1179/030716980803287170 ↗
6. Beynon · Mater. Forum · 1992 · 16 · 37
7. Hickson · ISIJ Int. · 1999 · 39 · 117610.2355/isijinternational.39.1176 ↗
8. W.-Y. Choo, K.-K. Um, J.-S. Lee, D.-H. Seo, J.-K. Choi, in: S. Takaki, T. Maki (Eds.), Proceedings of the International Symposium on the Ultrafine Grained Steels (ISUGS 2001), Fukuoka, Japan, 2001, p. 2.
9. Mabuchi · ISIJ Int. · 1999 · 39 · 47710.2355/isijinternational.39.477 ↗
10. Hurley · Mater. Sci. Technol. · 2001 · 17 · 136010.1179/026708301101509566 ↗
11. Hurley · Scripta. Mater. · 1999 · 40 · 43310.1016/S1359-6462(98)00442-4 ↗
12. D.W. Suh, J.Y. Cho, J.H. Kang, K.H. Oh, H.C. Lee, in: S. Takaki, T. Maki (Eds.), Proceedings of the International Symposium on the Ultrafine Grained Steels (ISUGS 2001), Fukuoka, Japan, 2001, p. 214.
13. P.D. Hodgson, D.C. Collinson, B. Perrett, in: A.G. Suzuki, T. Sakai, F. Matsuda (Eds.), Proceedings of the International Symposium on Physical Simulation, NRIM, 1997, p. 219.10.1055/s-1997-748 ↗
14. P.D. Hodgson, Mathematical modeling of recrystallization processes during the hot rolling of steel, Ph.D thesis, University of Queensland, Brisbane, Australia, 1992.
15. H. Beladi, G.L. Kelly, A. Shokouhi, P.D. Hodgson, Mater. Sci. Eng. A 367 (2004) 152.10.1016/j.msea.2003.09.095 ↗
16. P.J. Hurley, Production of ultra-fine ferrite during thermomechanical processing of steels, Ph.D Thesis, Monash University, Melbourne, Australia, 1999.
17. D.A. Porter, K.E. Easterling, Phase transformations in metals and alloys, second ed., Chapman and Hall, London, UK, 1992.10.1007/978-1-4899-3051-4 ↗
18. H. Beladi, A. Zarei-Hanzaki, G.L. Kelly, P.D. Hodgson, in: Proceedings of the International Confress on the Thermomechanical processing: Mechanics, Microstructure and Control, The University of Sheffield, England (2002) p. 252.
19. Pandi · ISIJ Int. · 1994 · 34 · 27010.2355/isijinternational.34.270 ↗
20. Kelly · ISIJ Int. · 2002 · 42 · 158510.2355/isijinternational.42.1585 ↗