Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: Influence of strain rate and temperature
Source abstract
Abstract
The objective of this study was to investigate the dynamic softening behavior of an austenitic stainless steel with high nitrogen (type ISO 5832-9) through hot torsion tests, in the temperature range of 900–1200 °C and in the strain rate range of 0.01–10 s−1. The shape of flow stress curves indicated that the softening was promoted by dynamic recovery followed by dynamic recrystallization with high level of recovery. The microstructure evolution indicated that even though after large straining as that of the steady state stresses a combination of strained and recrystallized grains was observed. The delay of dynamic recrystallization, which is a consequence of the intermediate level of stacking fault energy of this steel, and the presence of large recrystallized grains, inside of necklace formed by small grains, were associated with extended recovery regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Gotman · J. Endourol. · 1997 · 11 · 38310.1089/end.1997.11.383 ↗
2. Örnhagen · J. Biomed. Mater. Res. · 1996 · 31 · 9710.1002/(SICI)1097-4636(199605)31:1<97::AID-JBM12>3.0.CO;2-J ↗
3. Giordani · Int. J. Fat. · 2004 · 26 · 112910.1016/j.ijfatigue.2004.03.002 ↗
4. Jorge · J. Mater. Process. Technol. · 2003 · 142 · 32110.1016/S0924-0136(03)00620-4 ↗
5. Poliak · J. Acta Mater. · 1996 · 44 · 12710.1016/1359-6454(95)00146-7 ↗
6. Doherty · Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗
7. Jafari · Mater. Sci. Eng. A · 2009 · 501 · 1610.1016/j.msea.2008.09.073 ↗
8. El Wahabi · Mater. Sci. Eng. A · 2003 · 343 · 11610.1016/S0921-5093(02)00357-X ↗
9. Sakai · J. Mater. Process. Technol. · 1995 · 53 · 34910.1016/0924-0136(95)01992-N ↗
10. Schramn · Metall. Trans. · 1975 · A6 · 134510.1007/BF02641927 ↗
11. Giordani · Scr. Mater. · 2006 · 55 · 74310.1016/j.scriptamat.2006.05.015 ↗
12. Silva · Mater. Sci. Eng. A · 2012 · 543 · 6910.1016/j.msea.2012.02.048 ↗
13. Fields · Proc. Am. Soc. Test. Mater. (ASTM) · 1957 · 57 · 1259
14. C. Rossard, P. Blain, Recherches sur la deformation des aciers a chaud. Publications de 1´Institut de Recherches de la Sidérurgie (IRSID), Série A, no. 174, October 1957.
15. ISI Publication 108 – Deformation under Hot Working Conditions. The Iron and Steel Institute. Printed by Perivan/WLP Group/Southend-on-sea, 1968, 183 pp.
16. Canova · J. Met. · 1979 · 31
17. Application of the torsion test to determine workability
18. Ryan · J. Mater. Process. Technol. · 1993 · 36 · 10310.1016/0924-0136(93)90025-2 ↗
19. Roucoules · Mater. Sci. Technol. · 1995 · 11 · 54810.1179/mst.1995.11.6.548 ↗
20. Modelling austenite flow curves in low alloy and microalloyed steels10.1016/1359-6454(95)00153-4 ↗
21. Relationship between the austenite recrystallized fraction and the softening measured from the interrupted torsion test technique10.1016/S1359-6462(98)00452-7 ↗
22. Balancin · Metall. Mater. Trans. A · 2000 · 31A · 135310.1007/s11661-000-0254-4 ↗
23. Militzer · Metall. Mater. Trans. A · 2000 · 31A · 1246
24. Abad · ISIJ Int. · 2001 · 41 · 137310.2355/isijinternational.41.1373 ↗
25. Barnett · Acta Mater. · 2002 · 50 · 228510.1016/S1359-6454(02)00048-4 ↗
26. Hurley · Metall. Mater. Trans. A · 2002 · 33A · 298510.1007/s11661-002-0283-2 ↗
27. Avramovic-Cingara · Mater. Sci. Technol. · 2003 · 19 · 1110.1179/026708303225008716 ↗
28. Hodgson · ISIJ Int. · 2004 · 44 · 122410.2355/isijinternational.44.1224 ↗
29. Azevedo · Mater. Sci. Eng. A · 2005 · 402 · 9810.1016/j.msea.2005.04.026 ↗
30. Beladi · Metall. Mater. Trans. A · 2007 · 38A · 45010.1007/s11661-006-9080-7 ↗
31. Abdollah-Zadeh · Mater. Sci. Eng. A · 2007 · 457 · 21910.1016/j.msea.2006.12.022 ↗
32. Spigarelli · Mater. Sci. Eng. A · 2010 · 527 · 421810.1016/j.msea.2010.03.029 ↗
33. Jorge · J. Mater. Res. Technol. · 2012 · 1 · 14110.1016/S2238-7854(12)70025-X ↗
34. Jonas · Acta Mater. · 2009 · 57 · 274810.1016/j.actamat.2009.02.033 ↗
35. Laasraoui · Metall. Mater. Trans. A · 1991 · 22A · 154510.1007/BF02667368 ↗
36. Jorge · Mater. Res. · 2005 · 8 · 30910.1590/S1516-14392005000300015 ↗
37. Najafizadeh · ISIJ Int. · 2006 · 46 · 167910.2355/isijinternational.46.1679 ↗
38. Mejía · Mater. Sci. Eng. A · 2011 · 528 · 413310.1016/j.msea.2011.01.102 ↗
39. Poliak · ISIJ Int. · 2003 · 43 · 68410.2355/isijinternational.43.684 ↗
40. Taylor · Mater. Sci. Eng. A · 2011 · 528 · 331010.1016/j.msea.2010.12.093 ↗
41. Mataya · Metall. Mater. Trans. A · 2003 · 34A · 168310.1007/s11661-003-0313-8 ↗