Effect of die parameters and material properties in ECAP with parallel channels
Source abstract
Abstract
In this paper, the influences of die parameters (die channel angle and channel displacement) and material properties (strength coefficient and strain hardening exponent) are investigated in equal channel angular pressing with parallel channels (ECAP-PC) using three dimensional (3D) finite element simulation (FEM). It has been shown that die parameters play an important role in the magnitude and homogeneity of effective strain. In general, die channel angle has more influence on the magnitude rather than homogeneity of effective strain, decreasing the die channel angle results in a higher magnitude of effective strain imposed on the sample and a higher pressing force. But on the other hand, channel displacement has more influence on the homogeneity of effective strain, increasing the die channel's displacement results in a more homogenous effective strain on the sample cross-section. Simulation on various strength coefficient and strain hardening exponents showed that the magnitude of the strain hardening exponent does not have much effect on the pressing force. On the other hand, the level of pressing force increases when the magnitude of the strength coefficient is increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Segal · Materials Science and Engineering A · 1999 · 271 · 32210.1016/S0921-5093(99)00248-8 ↗
2. Xu · Journal of Alloys and Compounds · 2004 · 378 · 2710.1016/j.jallcom.2003.10.065 ↗
3. Furukawa · Materials Science and Engineering A · 2002 · 324 · 8210.1016/S0921-5093(01)01288-6 ↗
4. Furukawa · Materials Science and Engineering A · 1998 · 257 · 32810.1016/S0921-5093(98)00750-3 ↗
5. Stolyarov · Materials Science and Engineering A · 2001 · 299 · 5910.1016/S0921-5093(00)01411-8 ↗
6. Langdon · Materials Science and Engineering A · 2006
7. Nakashima · Materials Science and Engineering A · 2000 · 281 · 8210.1016/S0921-5093(99)00744-3 ↗
8. Kim · Materials Letters · 2003 · 57 · 168910.1016/S0167-577X(02)01053-4 ↗
9. Xu · Journal of Materials Processing Technology · 2006 · 176 · 25110.1016/j.jmatprotec.2006.03.167 ↗
10. Kim · Materials Science and Engineering A · 2005 · 412 · 28710.1016/j.msea.2005.08.222 ↗
11. Nagasekhar · Materials Science and Engineering A · 2005 · 410–411 · 26910.1016/j.msea.2005.08.043 ↗
12. Oruganti · Materials Science and Engineering A · 2005 · 406 · 10210.1016/j.msea.2005.06.031 ↗
13. S. Xu, G. Zhao, X. Ma, G. Ren, Journal of Materials Processing Technology. doi:10.1016/j.jmatprotec.2006.11.025.10.1016/j.jmatprotec.2006.11.025 ↗
14. Kim · Journal of Materials Processing Technology · 2002 · 130–131 · 49710.1016/S0924-0136(02)00796-3 ↗
15. Wang · Journal of Materials Processing Technology · 2009 · 209 · 318210.1016/j.jmatprotec.2008.07.022 ↗
16. Karpuz · Materials Science and Engineering A · 2009 · 503 · 14810.1016/j.msea.2008.01.095 ↗
17. Patil Basavaraj · Journal of Materials Processing Technology · 2009 · 209 · 8910.1016/j.jmatprotec.2008.01.031 ↗
18. Djavanroodi · Materials Science and Engineering A · 2010 · 527 · 123010.1016/j.msea.2009.09.052 ↗
19. Raab · Materials Science and Engineering A · 2005 · 410–411 · 23010.1016/j.msea.2005.08.089 ↗
20. Liu · Materials Science and Engineering A · 1998 · 242 · 13710.1016/S0921-5093(97)00467-X ↗
21. Zuyan · Journal of Materials Processing Technology · 1999 · 94 · 19310.1016/S0924-0136(99)00096-5 ↗
22. Valiev · Progress in Materials Science · 2006 · 51 · 88110.1016/j.pmatsci.2006.02.003 ↗
23. Rosochowski · Journal of Materials Processing Technology · 2002 · 125–126 · 30910.1016/S0924-0136(02)00339-4 ↗
24. Wei · Scripta Materialia · 2006 · 54 · 186510.1016/j.scriptamat.2006.02.026 ↗
25. Suo · Materials Science and Engineering A · 2007 · 466 · 16610.1016/j.msea.2007.02.068 ↗