journal article·2004-05

Continuous grain refinement of aluminum strip by conshearing

H. Utsunomiya, K. Hatsuda, T. Sakai, Y. Saito

Materials Science and Engineering: A· Volume 372· Issue 1-2
Publisher page

Abstract

Abstract The ‘conshearing’ process, a continuous version of Equal Channel Angular Extrusion was applied to 2 mm thick 1100 aluminum alloy strips at room temperature. It was found that the optimum flection angle of the ECA die (or the supplementary angle of the channel angle) to impose high strain is 65°. The 〈1 1 1〉//ND shear texture was developed and showed maximum intensity after two passes. After six passes, banded microstructure with ultrafine grains of which mean thickness and length were 0.42 and 1.4 μm, respectively, was observed. The obtained material showed well-balanced mechanical properties; i.e., a tensile strength of 170 MPa and an elongation to failure of 23%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Y. Saito, H. Utsunomiya, H. Suzuki, in: M. Geiger (Eds.), Adv. Tech. of Plast. 1999, Springer, Berlin, 1999, pp. 2459–2464.
2. Saito · Scripta Mater. · 2002 · 42 · 113910.1016/S1359-6462(00)00349-3 ↗
3. Segal · Russ. Metall. · 1981 · 1 · 99
4. Utsunomiya · Proc. Inst. Mech. Engr. B. · 2001 · 215 · 94710.1243/0954405011518854 ↗
5. H. Utsunomiya, Y. Saito, Y. Okamura, T. Sakai, in: T. Maki, S. Takaki (Eds.), Proceedings of the International Symposium on Ultrafine Grained Steels, ISIJ, Tokyo, 2001, pp. 146–149.
6. Saito · Acta Mater. · 1999 · 47 · 57910.1016/S1359-6454(98)00365-6 ↗
7. Utsunomiya · J. Jpn. Soc. Tech. Plast. · 2003 · 44 · 100
8. Lee · Acta Mater. · 2002 · 50 · 400510.1016/S1359-6454(02)00200-8 ↗
9. Utsunomiya · J. Mat. Eng. Perform. · 1997 · 6 · 31910.1007/s11665-997-0096-y ↗
10. Iwahashi · Acta Mater. · 1998 · 46 · 331710.1016/S1359-6454(97)00494-1 ↗
11. Horita · J. Mat. Process. Tech. · 2001 · 117 · 28810.1016/S0924-0136(01)00783-X ↗
12. Nakashima · Acta Mater. · 1998 · 46 · 158910.1016/S1359-6454(97)00355-8 ↗
13. Sun · Mat. Sci. Eng. · 2002 · A283 · 82
14. Hughes · Acta Mater. · 1997 · 45 · 387110.1016/S1359-6454(97)00027-X ↗
15. Utsunomiya · J. Jpn. Soc. Tech. Plast. · 1999 · 40 · 1187
16. Utsunomiya · Mater. Sci. Forum · 2003 · 426-432 · 268110.4028/www.scientific.net/MSF.426-432.2681 ↗