Microstructure and mechanical properties of 4% cobalt and nickel alloyed ductile irons
Source abstract
Abstract
Abstract In the study, 4% cobalt and nickel elements were added to ductile iron (DI) to investigate the effects of the alloying elements on both its microstructure and its mechanical properties. The results show that 4% cobalt alloyed ductile iron (4% Co-DI) not only increases the nodule count and ferrite content in the microstructure, but also improves the mechanical properties such as yield strength, tensile strength, impact toughness and fracture toughness ( K IC ) as compared to unalloyed DI. In contrast, with 4% nickel addition, there is a decreased nodule count and increased pearlite content in the matrix. However, this material (4% Ni-DI) has the highest hardness and strength but the lowest ductility and toughness among all the ductile irons. In the case of microstructure, all kinds of iron have a sufficient nodularity up to 90% and the sequence of the nodule count is 4% Co-DI (150 nodules/mm 2 ) > DI (106 nodules/mm 2 ) > 4% Ni-DI (85 nodules/mm 2 ). Moreover, it appears that cobalt plays an important role in stabilizing the ferrite phase, whereas 4% nickel accelerates the formation of pearlite in ductile iron.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Walton · 1981
2. Loper · Foundry Manage. Technol. · 1994 · 11 · 32
3. Jenkins · 1990
4. Elliott · 1988
5. Labrecque · Can. Metall. Quart. · 1998 · 37 · 34310.1016/S0008-4433(98)00031-7 ↗
6. Smith · 1993
7. Seker · Material Design · 2003 · 24 · 4710.1016/S0261-3069(02)00081-X ↗
8. Minkoff · 1983
9. ASTM A439: Annual Book of ASTM Standards, vol. 01.02, 1989, pp. 238–242.
10. ASTM E8M: Annual Book of ASTM Standards, vol. 03.01, 1997, pp. 77–97.
11. ASTM E399: Annual Book of ASTM Standards, vol. 03.01, 1992, pp. 506–536.
12. ASTM E327M: Annual Book of ASTM Standards, vol. 01.02, 1991, pp. 138–139.
13. ASTM A247: Annual Book of ASTM Standards, vol. 01.02, 1990, pp. 117–118.
14. Smith · 1983
15. Siefer · AFS Trans. · 1970 · 78 · 382