journal article·2009-08Open access

Characteristics of martensite as a function of the Ms temperature in low-carbon armour steel plates

Kasonde Maweja, Waldo Stumpf, Nic van der Berg

Materials Science and Engineering: A· Volume 519· Issue 1-2

Abstract

The microstructure, morphology, crystal structure and surface relief of martensite in a number of experimental armour steel plates with different Ms temperatures were analysed. Atomic force microscopy, thin foil transmission electron microscopy and scanning electron microscopy allowed the identification of three groups of low-carbon martensitic armour steels. The investigation showed that the size of individual martensite products (plates or packets, laths or blocks) increases as the Ms temperature increases. Comparison of ballistic performances suggests that the morphology (plate or lath) and size of the individual martensite products dictate the effective “grain size” in resisting fracture or perforation due to ballistic impact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Mittal Steel South Africa, Technical notes, 2003.
2. Wolsky · 1982
3. Srivathsa · Journal of Materials Processing Technology · 1999 · 96 · 8110.1016/S0924-0136(99)00270-8 ↗
4. Srivathsa · Computer Simulation Modelling in Engineering · 1998 · 3 · 33
5. Maweja · Materials Science and Engineering: A · 2006 · 432 · 15810.1016/j.msea.2006.06.033 ↗
6. Maweja · Materials Science and Engineering: A · 2008 · 485 · 14010.1016/j.msea.2007.08.048 ↗
7. Sun · Materials Science and Engineering: A · 2009 · 499 · 1810.1016/j.msea.2007.11.100 ↗
8. Jena · Engineering Failure Analysis · 2008 · 15 · 108810.1016/j.engfailanal.2007.11.011 ↗
9. Kar · Materials Science and Engineering: A · 2008 · 498 · 28310.1016/j.msea.2008.07.060 ↗
10. Demir · Materials & Design · 2008 · 29 · 200910.1016/j.matdes.2008.04.010 ↗
11. Çoban · Materials & Design · 2009 · 30 · 62810.1016/j.matdes.2008.05.042 ↗
12. Liu · Materials Science and Engineering: A · 2009 · 501 · 3010.1016/j.msea.2008.09.076 ↗
13. Yılbas · International Journal of Thermal Sciences · 2009 · 48 · 38310.1016/j.ijthermalsci.2008.09.004 ↗
14. Bhav Singh · International Journal of Impact Engineering · 2009 · 36 · 61110.1016/j.ijimpeng.2008.07.082 ↗
15. Zhen · Materials Science and Engineering: A · 2008 · 489 · 21310.1016/j.msea.2007.12.035 ↗
16. Bourne · International Journal of Impact Engineering · 2008 · 35 · 67410.1016/j.ijimpeng.2007.08.001 ↗
17. Grujicic · Materials Science and Engineering: A · 2008 · 479 · 1010.1016/j.msea.2007.06.013 ↗
18. Davies · Metallurgical Transactions · 1971 · 2 · 193910.1007/BF02814918 ↗
19. Mou · Acta Metallurgica · 1989 · 37 · 73710.1016/0001-6160(89)90002-3 ↗
20. Xiaoping · Progress in Natural Science · 2002
21. Maweja · Materials Science and Engineering: A · 2008 · 480 · 16010.1016/j.msea.2007.07.078 ↗
22. Krauss · Materials Science and Engineering: A · 1999 · 273–275 · 4010.1016/S0921-5093(99)00288-9 ↗