Controlled annealing of sandwich-structured aluminum AA1050 for optimized combinations of strength and ductility
Source abstract
Abstract
Abstract A heavily rolled AA1050 sample with a microstructurally continuous sandwich structure, characterized by distinct microstructural evolution in the center and subsurface layers, has been annealed at different temperatures for 2 h with the objective of establishing optimized combinations of strength and ductility. It is observed that a large reduction in the fraction of high angle boundaries taking place during recovery in the subsurface layers results in delayed onset of recrystallization compared to that in the center layer, where the change in the fraction of high angle boundaries during recovery is small. The different recrystallization rates in this sandwich structure facilitate control of the overall recrystallized fraction, and can therefore be advantageous in obtaining a desired combination of both strength and ductility. A good combination of moderate strength and intermediate ductility is obtained in the material annealed at 250 °C and 270 °C, where the area fractions of recrystallized microstructure in the center are 7% and 36%, respectively. By analyzing the dependence of mechanical properties on the microstructure it is found that the mechanical strength can be described by a simple composite model using a rule of mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains10.1016/S1359-6454(02)00174-X ↗
2. Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding10.1016/j.msea.2008.06.025 ↗
3. Enhancement of strength and stability of nanostructured Ni by small amounts of solutes10.1016/j.scriptamat.2011.06.003 ↗
4. Microstructure and mechanical properties of nickel processed by accumulative roll bonding10.1016/j.msea.2013.04.002 ↗
5. Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding10.1016/j.msea.2012.08.109 ↗
6. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
7. Strength and ductility of bi-modal Cu10.1002/adem.201100019 ↗
8. Annealing behaviour of ultrafine-grained aluminium10.1080/14786435.2013.856526 ↗
9. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
10. Partial recrystallization of gum metal to achieve enhanced strength and ductility10.1016/j.actamat.2017.06.051 ↗
11. Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure10.1016/j.actamat.2009.04.010 ↗
12. Evolution of microstructure and texture during annealing of aluminum AA1050 cold rolled to high and ultrahigh strains10.1007/s11661-010-0291-6 ↗
13. Recovery by triple junction motion in aluminium deformed to ultrahigh strains10.1098/rspa.2011.0097 ↗
14. Recovery and recrystallization in commercial purity aluminum cold rolled to an ultrahigh strain10.1016/j.actamat.2013.05.024 ↗
15. In situ observation of triple junction motion during recovery of heavily deformed aluminum10.1016/j.actamat.2014.12.014 ↗
16. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
17. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
18. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1324069111 ↗
19. Modeling the constitutive response of bimodal metals10.1007/BF02586214 ↗
20. Automatic determination of recrystallization parameters based on EBSD mapping10.1016/j.matchar.2007.06.015 ↗
21. Determination of boundary area and spacing in prismatic structures with applications to dislocation boundaries10.1016/S1044-5803(02)00257-7 ↗
22. A gradient nanostructure generated in pure copper by platen friction sliding deformation10.1016/j.scriptamat.2016.02.007 ↗
23. High tensile ductility and strength in bulk nanostructured nickel10.1002/adma.200800214 ↗
24. Large strain synergetic material deformation enabled by hybrid nanolayer architectures10.1038/s41598-017-11001-w ↗
25. Rolling and annealing texture in twin roll cast commercial purity aluminium10.4028/www.scientific.net/MSF.157-162.913 ↗
26. Evolution of recrystallization texture from aluminum sheet cold rolled under unlubricated condition10.1007/s11661-997-0179-2 ↗
27. Effect of strain states during cold rolling on the recrystallized grain size in an aluminum alloy10.1016/j.scriptamat.2007.10.049 ↗
28. Microstructural and crystallographic aspects of conventional and asymmetric rolling processes10.1016/j.actamat.2008.01.042 ↗
29. Influence of thickness reduction per pass on strain, microstructures and mechanical properties of 7050 Al alloy sheet processed by asymmetric rolling10.1016/j.msea.2015.10.059 ↗