The microstructure evolution in the isothermal compression of Ti-17 alloy
Source abstract
Abstract
Abstract The effects of processing parameters on flow curves and microstructure evolution in the isothermal compression of Ti-17 alloy are investigated. The experiments are conducted in a deformation temperature range of 800–920 °C, strain rate range of 0.01–10.0 s−1 and height reduction range of 30–70%. The flow stress increases with a decrease in deformation temperature or an increase in strain rate. Based on the optical microstructure observations, both of deformation temperature and strain rate have a great effect on the volume fraction of α grains. The effect of strain rate on primary α grains morphology and softening mechanism is of first-order importance compared with the effects of deformation temperature and strain. Transmission electron microscope (TEM) analysis is carried out at a deformation temperature of 840 °C, strain rate of 0.1 s−1 and 10.0 s−1 to reveal the two mechanisms for the morphology evolution of primary α grains. When the strain rate is relatively low, the primary α grains are globularized after the penetration of β phase along α/α subboundaries. While the strain rate is relatively high, the primary α grains are elongated, and the dislocation density in grain interior is relatively high.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Weiss · Mater. Sci. Eng. A · 1998 · 243 · 4610.1016/S0921-5093(97)00783-1 ↗
2. Williams · Acta Mater. · 2003 · 51 · 557510.1016/j.actamat.2003.08.023 ↗
3. Wanjara · Mater. Sci. Eng. A · 2005 · 396 · 5010.1016/j.msea.2004.12.005 ↗
4. Lütjering · Mater. Sci. Eng. A · 1996 · 243 · 3210.1016/S0921-5093(97)00778-8 ↗
5. Prasad · Mater. Sci. Eng. A · 1998 · 243 · 8210.1016/S0921-5093(97)00782-X ↗
6. Seshacharyulu · Mater. Sci. Eng. A · 2002 · 325 · 11210.1016/S0921-5093(01)01448-4 ↗
7. Semiatin · Metall. Mater. Trans. A · 2006 · 37 · 112510.1007/s11661-006-1091-x ↗
8. Li · J. Mater. Process. Technol. · 2007 · 183 · 7110.1016/j.jmatprotec.2006.10.002 ↗
9. Boyer · Mater. Sci. Eng. A · 1996 · 213 · 10310.1016/0921-5093(96)10233-1 ↗
10. Wang · Mater. Sci. Eng. A · 2010 · 527 · 619310.1016/j.msea.2010.06.059 ↗
11. Ning · Mater. Sci. Eng. A · 2011 · 528 · 181210.1016/j.msea.2010.11.019 ↗
12. Li · Mater. Sci. Eng. A · 2012 · 546 · 4010.1016/j.msea.2012.03.020 ↗
13. Zhao · J. Mater. Process. Technol. · 2009 · 209 · 550910.1016/j.jmatprotec.2009.05.007 ↗
14. Sarkar · Mater. Sci. Eng. A · 2011 · 528 · 481910.1016/j.msea.2011.03.014 ↗
15. Chandravanshi · J. Alloys Compd. · 2011 · 509 · 550610.1016/j.jallcom.2011.02.114 ↗
16. Weiss · Metall. Trans. A · 1986 · 17 · 193510.1007/BF02644991 ↗
17. Jia · Mater. Sci. Eng. A · 2011 · 528 · 406810.1016/j.msea.2011.01.113 ↗
18. Semiatin · Acta Mater. · 2001 · 49 · 356510.1016/S1359-6454(01)00236-1 ↗
19. Wanjara · Mater. Sci. Eng. A · 2006 · 416 · 30010.1016/j.msea.2005.10.042 ↗
20. Kailas · Metall. Mater. Trans. A · 1994 · 25 · 217310.1007/BF02652318 ↗
21. Semiatin · Metall. Trans. A · 1981 · 12 · 170510.1007/BF02643753 ↗
22. Semiatin · Philos. Trans. R. Soc. London A · 1999 · 357 · 148710.1098/rsta.1999.0386 ↗
23. Stefansson · Metall. Mater. Trans. A · 2003 · 34 · 69110.1007/s11661-003-0103-3 ↗
24. Jia · Mater. Sci. Eng. A · 2011 · 530 · 13510.1016/j.msea.2011.09.064 ↗