journal article·2004-10

Analysis of deposit growth in spray forming with multiple atomizers

S. Markus, C. Cui, U. Fritsching

Publisher page

Abstract

In spray forming, multiple atomizers may be used simultaneously to increase the throughput and to spray large size billets. In addition, the advantage of the use of multiple sprays is better control of the distribution of the incoming mass and enthalpy fluxes on the deposit surface. By this, the thermal condition in the top layer of the billet is controlled to ensure steady-state growth and cooling of the deposit. The interaction of two overlapping sprays is described in this paper. The mass flux and the enthalpy distribution have been experimentally investigated for different spray conditions and overlapping angles of the two sprays. Starting from a geometric model, a three-dimensional simulation of the preform geometry and incoming enthalpy flux on the top layer of the deposit has been conducted. The most relevant process parameters and physical properties are taken into account in this model. The model results are in good agreement with experimental preform shapes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics Simulations and Interactions · Plant Surface Properties and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A. Leatham, J. Met. 51 (4) (April) (1999).
2. L. Shaw, C. Spiegelhauer, Int. J. P/M 33 (3) (1997).
3. C. Spiegelhauer, O. Sandberg, in: Proceedings of the Powder Metallurgy & Particulate Materials World Congress, vol. 4, Orlando, USA, 16–21 June 2002, pp.184–191.
4. G.G. Nasr, A.J. Yule, L. Bendig, Industrial Sprays and Atomization, Springer Verlag, 2002 (ISBN-1-85233-460-6).10.1007/978-1-4471-3816-7_1 ↗
5. Frigaard · J. Eng. Math. · 1997 · 31 · 41110.1023/A:1004295400356 ↗
6. R.S. Minisandram, R.M. Forbes Jones, K.M. Kelkar, S.V. Patankar, W.T. Carter, in: Proceedings of the SDMA Conference on Prediction of the Thermal History of Preform of Produced by Clean Metal Spraying, vol. 2, Bremen, Germany, June 2000, pp. 789–802 (ISBN 2-88722-473-6).
7. Meyer · Int. J. Therm. Sci. · 2003 · 42 · 15310.1016/S1290-0729(02)00015-7 ↗
8. Ho · Scripta Mater. · 1996 · 34 · 52710.1016/1359-6462(95)00556-0 ↗
9. R. Schröder, R. Kienzler, Numerische Untersuchungen an sprühkompaktierten bolzenförmigen Deposits, Kolloquium des SFB 372, vol. 3, University of Bremen, 1998, pp. 93–114 (ISBN 3-88722-419-1).
10. Fischer · Int. J. Powder Metall. · 1999 · 35 · 27
11. I.A. Frigaard, in: Proceedings of the SDMA Conference on Spray Forming of Large Diameter Billets Using a Twin Atomiser System: Basic Features of Spray-form Growth Dynamics, vol. 2, Bremen, Germany, June 2000, pp. 839–853 (ISBN 2-88722-473-6).
12. Lefebvre · J. Fluids Eng. · 1996 · 118 · 64510.1115/1.2835489 ↗
13. D. Bergmann, U. Fritsching, K. Bauckhage, Comput. Fluid Dyn. J., Special Number 2001, pp. 203–211 (ISSN 0918-6654).
14. M. Buchholz, Untersuchung des Kompaktierverhaltens an sprühkompaktierten Bolzen, Ph.D. Thesis, University of Bremen, 2002 (ISBN-3-8322-1491-7).
15. V. Uhlenwinkel, Zum Ausbreitungsverhalten der Partikeln bei der Sprühkompaktierung von Metallschmelzen, VDI-Verlag, Reihe 3, Nr. 300, 1992.10.1002/cite.3306409105 ↗
16. C. Kramer, Die Kompaktierungsrate beim Sprühkompaktieren von Gaußförmigen Depositen, Ph.D. Thesis, University of Bremen, 1997.
17. M.J. Kilgard, The OpenGL Utility Toolkit (GLUT) Programming Interface, Silicon Graphics Inc., 13 November 1996.
18. KAMOS: Programmsystem zur Analyse ebener Koppelgetriebe auf PC-Basis, 2003, http://www.ifg.uni-hannover.de.
19. N. Ellendt, Modellierung der Enthalpieverteilung im Sprühkegel beim Sprühkompaktieren, Diplom Thesis, Universität Bremen, 2003.