journal article·2017-06

Precipitation enhanced ultragrain refinement of Ti-Mo microalloyed ferritic steel during warm rolling

Lei Cheng, Yulai Chen, Qingwu Cai, Wei Yu, Gang Han, Entao Dong, Xiao Li

Publisher page

Abstract

Abstract Ultragrain refinement caused by continuous dynamic recrystallization (cDRX) was studied from microstructure, texture and precipitation. Compared with microstructures of deformation induced ferrite transition (DIFT), ferrite matrix refined through cDRX presented more substructures. Textures formed through the cDRX mainly consisted of (001)[1 1 ¯ 0] and (111) [ 1 ¯ 1 ¯ 2 ] and the intensity of (001)[1 1 ¯ 0] could increase with strain. Rolling in γ non-recrystallization region facilitated the strain induced precipitation, hence more subboundaries formed during the subsequent warm rolling process. With the consumption of alloying elements, stability of remaining austenite was reduced and this promoted the formation of high temperature proeutectoid ferrite. Additionally, stress fields induced by the nanoscale precipitates could suppress the formation of microshear bands and further promote the generation of high angle boundaries, especially in the γ-fiber textures. Grains were refined to an average size of ~1 µm through cDRX and most refined grains transformed from γ-fiber textures presented an orientation of //ND. Moreover, the refined matrix performed better mechanical properties along the rolling direction and the precipitation enhanced ultragrain refinement through cDRX showed greater potential on the refining of ferrite grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ultrafine ferrite formation through isothermal static phase transformation10.1016/j.actamat.2011.03.043 ↗
2. Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing10.1016/j.msea.2003.09.095 ↗
3. Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement10.1016/S0921-5093(00)01823-2 ↗
4. Formation and mechanical properties of bimodal microstructures in 0.2% carbon steel by heavy-reduction hot/warm compression10.1016/j.proeng.2014.10.023 ↗
5. Deformation-induced ferrite transformation in a low carbon Nb–Ti microalloyed steel10.1016/j.matdes.2005.11.006 ↗
6. Deformation induced ferrite transformation in low carbon steels10.1016/j.cossms.2006.02.014 ↗
7. Thermomechanical processing route to achieve ultrafine grains in low carbon microalloyed steels10.1016/j.actamat.2016.08.010 ↗
8. Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing10.1016/j.msea.2003.09.095 ↗
9. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
10. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273K10.1016/j.actamat.2014.09.023 ↗
11. Study on the ferrite grain refinement during intercritical deformation of a microalloyed steel10.1016/j.msea.2010.01.075 ↗
12. Microstructural development during warm rolling of an IF steel10.1016/S1359-6454(97)00170-5 ↗
13. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
14. The formation of ultrafine ferrite through static transformation in low carbon steels10.1016/j.actamat.2007.05.024 ↗
15. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
16. Influence of ferrite matrix and precipitation status on the mechanical properties of low carbon low alloy steel during high temperature tension10.1016/j.msea.2016.09.058 ↗
17. Relationships among microstructure, precipitation and mechanical properties in different depths of Ti–Mo low carbon low alloy steel plate10.1016/j.msea.2015.10.055 ↗
18. Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel10.1016/j.actamat.2011.06.037 ↗
19. Carbide precipitation in austenite of a Ti–Mo-containing low-carbon steel during stress relaxation10.1016/j.msea.2013.02.056 ↗
20. From heterogeneous to homogeneous nucleation for precipitation in austenite of microalloyed steels10.1016/j.actamat.2014.10.056 ↗
21. Microstructural evolution and formation mechanism of bimodal structure of 0.2% carbon steel subjected to the heavy-reduction controlled rolling process10.1016/j.msea.2014.11.070 ↗
22. Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process10.1016/S1359-6462(98)00442-4 ↗
23. Microstructure and texture of Nb+Ti stabilized ferritic stainless steel10.1016/j.matchar.2008.03.018 ↗
24. Texture evolution during the recrystallization of a warm-rolled low-carbon steel10.1016/j.actamat.2006.02.050 ↗
25. Deformation banding and recrystallization of α fibre components in heavily rolled IF steel10.1016/j.actamat.2004.05.017 ↗
26. Fast estimates of evolving orientation microstructures in textured bcc polycrystals at finite plastic strains10.1016/j.actamat.2010.05.004 ↗
27. A microstructural study of the origins of γ recrystallization textures in 75% warm rolled IF steel10.1016/j.actamat.2006.05.026 ↗
28. Microstructure, texture and grain boundaries character distribution evolution of ferritic stainless steel during rolling process10.1016/j.jmatprotec.2008.06.012 ↗
29. Design of texture for improved formability of high-strength steel10.1016/S0921-5093(02)00192-2 ↗
30. Evolution of recrystallization texture in a 0.78wt% Cr extra-low-carbon steel after warm and cold rolling10.1016/j.actamat.2011.04.027 ↗
31. Dissolution and precipitation behaviour in steels microalloyed with niobium during thermomechanical processing10.1016/j.actamat.2015.06.057 ↗
32. A model for interphase precipitation based on finite interface solute drag theory10.1016/j.actamat.2010.05.016 ↗
33. Haldar · 2008
34. Warm deformation and annealing behaviour of iron–silicon–(carbon) steel sheets10.1016/j.actamat.2015.05.018 ↗
35. Texture induced cleavage delamination of warm-rolled low carbon steel10.1007/BF02668900 ↗
36. TEM analysis of defect structures in mechanically milled, nanocrystalline Fe10.2355/isijinternational.43.755 ↗
37. Controlling strength and ductility: dislocation-based model of necking instability and its verification for ultrafine grain 316L steel10.1016/j.actamat.2016.01.005 ↗
38. Microstructure and crystallographic texture of an ultrafine grained C–Mn steel and their evolution during warm deformation and annealing10.1016/j.actamat.2004.10.051 ↗
39. Ultrafine grain formation in ferritic stainless steel during severe plastic deformation10.1007/s11661-008-9556-8 ↗