journal article·2021-01

Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti–Al–V–Мо) at temperatures in the range of 293–973 K

G.P. Grabovetskaya, I.P. Mishin, E.N. Stepanova, O.V. Zabudchenko, I.V. Ratochka

Publisher page

Abstract

Abstract The development of plastic deformation in an ultrafine-grained titanium alloy (Ti–Al–V–Mo; hereinafter VT16 alloy) under tension with a rate of 6.9·10−3 s−1 in the temperature range of 293–973 K is investigated depending on the structure and phase composition of the alloy. It has been established that the deviation of the phase composition from the equilibrium one toward the increasing β phase enhances the resistance of the UFG VT16 alloy to the localization of plastic deformation during tension at low temperatures (293–673 K). Under tension of the UFG VT16 alloy in the temperature range of the superplastic flow (823–973 K), the indicated deviation of the phase composition from the equilibrium one contributes to a greater elongation to failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Peters · 2003
2. Moiseyev · 2005
3. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
4. Brunette · 2001
5. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
6. Ilyin · 2009
7. Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion10.1016/j.msec.2013.01.056 ↗
8. Fundamentals of superior properties in bulk nanoSPD materials10.1080/21663831.2015.1060543 ↗
9. Microstructure evolution and mechanical behavior of ultrafine Ti–6Al–4V during low temperature superplastic deformation10.1016/j.actamat.2016.09.003 ↗
10. Superplasticity in the Ti–6Al–Nb alloy processed by high-pressure torsion10.1016/j.msea.2015.06.020 ↗
11. Factors influencing superplasticity in the Ti–6Al–4V alloy processed by high-pressure torsion10.1016/j.msea.2018.01.091 ↗
12. Ti–6Al–4V alloy with an ultrafine-grained microstructure exhibiting low-temperature–high-strain-rate superplasticity10.1016/j.matlet.2013.02.033 ↗
13. Kolobov · 2007
14. New method of severe plastic deformation of metals10.1007/s11041-018-0231-4 ↗
15. Ultra-fine grain refinement, superplasticity and its application of titanium alloys obtained through protium treatment10.4028/www.scientific.net/MSF.426-432.673 ↗
16. Effect of heat-treatment condition on structural and phase transformations in a two- phase α + β titanium alloy subjected to thermomechanical treatment10.1134/S0031918X1006013X ↗
17. Phase transformations in Ti–Fe alloys induced by high-pressure torsion10.1002/adem.201500143 ↗
18. Evolution of the structural-phase state of a Ti–Al–V–Мо alloy during severe plastic deformation and subsequent annealing10.1007/s11182-016-0744-5 ↗
19. Phase precipitation behavior during isothermal deformation in β-quenched near beta titanium alloy Ti-733310.1016/j.jallcom.2016.02.102 ↗
20. Influence of cooling rate following heat treatment on microstructure and phase transformation for a two-phase alloy10.1016/j.jallcom.2016.07.107 ↗
21. Transformation pathway upon heating of Ti–Fe alloys deformed by high-pressure torsion10.1002/adem.201700933 ↗
22. Effect of hydrogen on the deformation development in the titanium alloy with a hierarchical ultrafine-grained structure in the temperature range of 293–973 K10.1063/1.5132263 ↗
23. E.W. Collings, The Physical Metallurgy of Titanium Alloys, American Society for Metals, 261 pp.
24. Gorelik · 2002
25. Effect of hydrogen on the creep of the ultrafine-grained zirconium Zr–1Nb alloy at 673 K10.1016/j.ijhydene.2017.03.118 ↗
26. Investigation of the decomposition of α′′ martensite in titanium alloy VT16 during continuous heating
27. Novikov · 1981 · 168
28. An analysis of the role of grain size on superplasticity of titanium aluminides10.1023/A:1004713220757 ↗
29. Superplasticity of metastable ultrafine-grained Ti-6242S alloy: mechanical flow behavior and microstructural evolution10.1016/j.msea.2019.03.085 ↗
30. Deformation behavior and plastic strain-induced localization inherent to nanostructured materials produced by severe plastic deformation techniques
31. Rybin · 1984
32. Room temperature deformation mechanisms in ultrafine-grained materials processed by hot isostatic pressing10.1016/j.msea.2006.04.155 ↗
33. Plastic distortion as a fundamental mechanism in nonlinear mesomechanics of plastic deformation and fracture10.1134/S1029959916030048 ↗
34. Grain boundary diffusion and creep of UFG Ti and Ti-6Al-4V alloy processed by severe plastic deformation, Ultrafine Grained Materials III
35. The theory of anomalous grain growth in submicrocrystalline materials produced by severe plastic deformation10.1134/S0031918X06070040 ↗
36. Grain boundary sliding revisited: developments in sliding over four decades10.1007/s10853-006-6476-0 ↗
37. Grain-boundary diffusion of nickel in submicrocrystalline molybdenum processed by severe plastic deformation10.1134/S1063785008020156 ↗
38. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
39. Bochvar · 1948 · vol. 5 · 649
40. Diffusion-accommodated flow and superplasticity
41. Grain-boundary sliding and its accommodation during creep and superplasticity10.1007/BF02656607 ↗
42. The rate controlling mechanism in superplasticity10.1016/0025-5416(71)90085-1 ↗
43. Diffusion controlled true grain boundary sliding nanostructured metals and alloys10.1016/j.msea.2008.02.057 ↗
44. The effect of grain boundary state on deformation process development in nanostructured metals processed by the methods of severe plastic deformation10.4028/www.scientific.net/MSF.683.69 ↗
45. Microstructural aspects of superplasticity in Ti-6Al-4V alloy10.1016/j.msea.2014.01.067 ↗
46. α Grain size and β volume fraction aspects of the superplasticity of Ti-6Al-4V10.1016/0921-5093(91)90442-P ↗
47. Kaibyshev · 1992
48. Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti-6Al-4V alloy10.1016/S0921-5093(98)01157-5 ↗
49. Superplastic forming and diffusion bonding of titanium alloys10.14429/dsj.36.5969 ↗