journal article·2021-05Open access

Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy

Abhinav Srivastava, Matthew W. Vaughan, Bilal Mansoor, Wahaz Nasim, Robert E. Barber, Ibrahim Karaman, Karl T. Hartwig

Abstract

Abstract This study describes a severe plastic deformation processing technique for tubular materials, in the interest of enhancing mechanical properties via grain refinement and crystallographic texture control. The process, dubbed as tube equal channel angular extrusion (tECAE), is used to process the Mg–3Al–1Zn (AZ31) magnesium alloy at low temperatures. Mg alloys often suffer from low strength levels derived from coarse grain size, strong crystallographic texture, and mechanical anisotropy; hence, AZ31 acts as an ideal candidate for tECAE, as AZ31 and other Mg alloys tubes have excellent potential application in various industries. Here, the texture evolution of one pass of tECAE processing at 200 °C, 175 °C, and 120 °C was assessed, where tECAE produced drastically refined grains and increased strength levels after only one pass. The texture evolution and the active deformation modes, and their relative activities, were successfully predicted using a viscoplastic self-consistent (VPSC) crystal plasticity model as a function of processing temperature, for the first time for the tECAE process. Overall, tECAE is shown to be a useful technique for quickly obtaining improved mechanical properties in Mg alloy tubes, and it can be applied to other materials in tubular form as well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Magnesium alloy applications in automotive structures10.1007/s11837-008-0150-8 ↗
2. Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing10.1016/j.msea.2011.06.043 ↗
3. Biodegradable magnesium alloys: a review of material development and applications10.4028/www.scientific.net/JBBTE.12.25 ↗
4. Monteiro · 2012
5. Recent advances on the development of magnesium alloys for biodegradable implants10.1016/j.actbio.2014.07.005 ↗
6. Reprint of: the history of biodegradable magnesium implants: a review10.1016/j.actbio.2015.07.017 ↗
7. Magnesium tube hydroforming, Materialwissenschaft und Werkstofftechnik: entwicklung, Fertigung, Prüfung
8. AM30 porthole die extrusions—a comparison with circular seamless extruded tubes10.1016/j.jmatprotec.2009.07.023 ↗
9. W.H. Sillekens, J. Bohlen, 9 - hydrostatic extrusion of magnesium alloys, in: C. Bettles, M. Barnett (Eds.), Advances in Wrought Magnesium Alloys, Woodhead Publishing2012, pp. 323-345.10.1533/9780857093844.2.323 ↗
10. S.R. Agnew, 2 - Deformation mechanisms of magnesium alloys, in: C. Bettles, M. Barnett (Eds.), Advances in Wrought Magnesium Alloys, Woodhead Publishing2012, pp. 63-104.10.1533/9780857093844.1.63 ↗
11. Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy10.1016/j.jallcom.2007.02.045 ↗
12. Effect of grain size on prismatic slip in Mg-3Al-1Zn alloy10.1016/j.scriptamat.2012.05.017 ↗
13. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
14. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
15. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
16. Room temperature equal-channel angular pressing of a magnesium alloy10.1016/j.actamat.2013.01.063 ↗
17. Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression10.1016/j.msea.2014.09.066 ↗
18. Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion10.1016/j.msea.2008.06.015 ↗
19. Principles of equal-channel angular sheet extrusion (ECASE): application to IF-steel sheets
20. Equal-channel angular sheet extrusion of interstitial-free (IF) steel: microstructural evolution and mechanical properties10.1016/j.msea.2011.05.014 ↗
21. Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets10.1016/j.msea.2014.04.112 ↗
22. Enhanced ductility in strongly textured magnesium produced by equal channel angular processing10.1016/j.scriptamat.2003.10.006 ↗
23. The role of heat treatment on the cyclic stress-strain response of ultrafine-grained interstitial-free steel10.1016/j.ijfatigue.2007.04.015 ↗
24. Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy10.1016/j.actamat.2014.12.006 ↗
25. Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes10.1016/j.actamat.2016.06.011 ↗
26. Microstructure and mechanical properties of heavily worked and recrystallized copper for low-temperature superconductor applications10.1109/TASC.2017.2651397 ↗
27. Effect of severe ausforming via equal channel angular extrusion on the shape memory response of a NiTi alloy10.1016/j.jnucmat.2006.12.007 ↗
28. Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium10.1016/j.msea.2010.11.021 ↗
29. Severe plastic deformation of metals by high-pressure tube twisting10.1016/j.scriptamat.2008.09.029 ↗
30. Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes10.1016/j.matlet.2011.06.039 ↗
31. Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes10.1016/j.matlet.2012.03.007 ↗
32. Principles of severe plastic deformation using tube high-pressure shearing10.1016/j.scriptamat.2012.07.028 ↗
33. Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes10.1080/02670836.2016.1215064 ↗
34. Equal Channel angular extrusion of tubular aluminum alloy specimens—analysis of extrusion pressures and mechanical properties10.1016/S1526-6125(06)80006-X ↗
35. Experimental investigation of three different tube equal channel angular pressing techniques10.4149/km_2015_1_27 ↗
36. Severe plastic deformation of tubular AA 6061 via equal channel angular pressing10.1016/j.matdes.2015.11.026 ↗
37. Hartwig · 2017
38. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
39. A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals10.1016/0921-5093(94)91047-2 ↗
40. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
41. In situ composites processed by simple shear10.1016/S0921-5093(96)10539-6 ↗
42. Grain refinement vs. crystallographic texture: mechanical anisotropy in a magnesium alloy10.1016/j.scriptamat.2010.09.042 ↗
43. Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization10.1186/2193-9772-3-10 ↗
44. Bachmann · 2010 · 63
45. Evaluation of strain rate during equal-channel angular pressing10.1557/JMR.2002.0026 ↗
46. A model for texture development dominated by deformation twinning: application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
47. Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions10.1016/j.ijplas.2014.10.012 ↗
48. Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn10.1016/j.actamat.2019.02.010 ↗
49. Deformation twinning in AZ31: influence on strain hardening and texture evolution10.1016/j.actamat.2010.07.041 ↗
50. Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium10.1016/j.matchar.2015.02.021 ↗
51. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
52. Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP10.1007/s10853-010-4589-y ↗
53. Production of ultrafine-grain microstructure in Mg alloy by alternate biaxial reverse corrugation10.1016/j.actamat.2006.06.045 ↗
54. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet10.1016/j.msea.2006.03.160 ↗
55. Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
56. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
57. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
58. Twinning and texture development in two Mg alloys subjected to loading along three different strain paths10.1016/j.actamat.2007.03.006 ↗
59. Kaya · 2013 · 33
60. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals10.1016/j.actamat.2010.11.064 ↗
61. Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins10.1016/j.msea.2007.02.109 ↗
62. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
63. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
64. Grain size effects on primary, secondary, and tertiary twin Development in Mg-4 wt pct Li (-1 wt pct Al) alloys10.1007/s11661-014-2491-y ↗
65. Grain size constraints on twin expansion in hexagonal close packed crystals10.1063/1.4965719 ↗