journal article·2020-03

Ultrafine grained Cu–3Ag-xZr (x = 0.5, 1.0 wt%) alloys with high strength and good ductility fabricated through rapid solidification and cryorolling

Xiang Wu, Richu Wang, Chaoqun Peng, Jing Zeng

Publisher page

Abstract

Abstract Ultrafine grained Cu–3Ag-xZr (x = 0.5, 1.0 wt%) alloys with high strength and good ductility were fabricated through rapid solidification in combination with cryorolling, followed by a short-time aging. The alloys after cryorolling exhibit a high strength but a relatively low ductility for the extremely high-density dislocations and large number of nano-/micro-sized particles. A significantly increased elongation is noticed with a relatively small decrease of strength in both alloys when aged at 400 °C for 10 min. The presence of ultrafine grains and increased density of nano-sized Ag precipitates during aging contribute to the retention of high strength. The reduction in dislocation density and the recovered ability of dislocation accumulation result in the increase of the ductility. Compared with the Cu–3Ag-0.5Zr alloy produced by casting and cryorolling combined with aging, the Cu–3Ag-xZr (x = 0.5, 1.0 wt%) alloys in this paper exhibit excellent combination of high strength and good ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
2. Ductility enhancement in Mg-0.2%Ce alloys10.1016/j.actamat.2018.09.023 ↗
3. Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion10.1016/j.actamat.2016.09.024 ↗
4. High density nano-scale twins in Cu induced by dynamic plastic deformation10.1016/j.scriptamat.2005.05.022 ↗
5. Effect of cryorolling on microstructure and mechanical properties of a peak-aged AA6082 extrusion10.1016/j.jallcom.2016.10.135 ↗
6. An effective method to obtain Cu-35Zn alloy with a good combination of strength and ductility through cryogenic rolling10.1016/j.msea.2018.01.014 ↗
7. Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying10.1016/j.matchar.2018.08.003 ↗
8. Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging10.1016/j.jallcom.2018.11.012 ↗
9. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
10. Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing10.1016/j.scriptamat.2019.01.016 ↗
11. High strength and ductile ultrafine-grained Cu-Ag alloy through bimodal grain size, dislocation density and solute distribution10.1016/j.actamat.2012.09.053 ↗
12. Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy10.1016/j.jallcom.2011.07.028 ↗
13. Formability and fracture behaviour of cryorolled Al-3 Mg-0.25 Sc alloy10.1016/j.msea.2018.02.072 ↗
14. Effects of Co and Si additions and cryogenic rolling on structure and properties of Cu-Cr alloys10.1016/j.msea.2018.10.093 ↗
15. A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment10.1016/j.msea.2016.10.087 ↗
16. Singh · 1993
17. Effect of Zr additions on the microstructure, and the mechanical and electrical properties of Cu-7 wt.%Ag alloys10.1016/j.msea.2006.07.121 ↗
18. Microstructure and mechanical properties of Cu-Ag-Zr alloy10.1007/s11665-013-0659-z ↗
19. Extension of solid solubility in magnesium by rapid solidification10.1016/0921-5093(90)90175-3 ↗
20. Rapid solidification of copper alloys with high strength and high conductivity10.1007/s11665-997-0053-9 ↗
21. Effects of annealing on microstructure and mechanical properties of rapidly solidified Cu-3 wt% Ag-1 wt% Zr10.1016/j.msea.2018.10.062 ↗
22. Microstructures and elevated temperature properties of rapidly solidified Cu-3Ag-0.5Zr and Cu-3Ag-0.5Zr-0.4Cr-0.35Nb alloys10.1016/j.jallcom.2019.06.344 ↗
23. Mechanical properties and microstructural stability of wrought, laser, and electron beam glazed NARloy-Z alloy at elevated temperatures10.1023/A:1018604513547 ↗
24. Microstructural inhomogeneities in Cu-Ag-Zr alloys due to heavy plastic deformation10.1016/j.msea.2009.08.036 ↗
25. Effect of heat treatments on microstructures and tensile properties of Cu-3 wt%Ag-0.5 wt%Zr alloy10.1007/s12540-018-0025-7 ↗
26. Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu-Ag-Zr-alloys10.1016/j.msea.2013.12.051 ↗
27. A constitutive model considering secondary phase harden and size effect in plastic deformation of Cu-3 wt%Ag-0.5 wt%Zr thin sheet10.1016/j.msea.2018.05.050 ↗
28. Nucleation and growth mechanism of Ag precipitates in a CuAgZr alloy10.1016/j.msea.2014.05.023 ↗
29. Microstructure evolution of Cu/Ag interface in the Cu-6wt.% Ag filamentary nanocomposite10.1016/j.actamat.2010.10.052 ↗
30. Grain refinement and tensile strength of carbon nanotube-reinforced Cu matrix nanocomposites processed by high-pressure torsion10.1007/s12540-013-5004-4 ↗
31. The effect of annealing treatment on the evolution of the microstructure, the mechanical properties and the texture of nano SiC reinforced aluminium matrix alloys with ultrafine grained structure10.1016/j.matchar.2019.05.023 ↗
32. Microstructural evolution and strengthening mechanisms operating during cryogenic rolling of solutionized Al-Cu-Mg alloy10.1016/j.msea.2018.12.103 ↗
33. A high strength and high electrical conductivity bulk Cu-Ag alloy strengthened with nanotwins10.1016/j.scriptamat.2016.10.022 ↗
34. High strength and good ductility in Cu-3Ag-0.5Zr alloy by cryo-rolling and aging10.1007/s11665-016-2419-3 ↗
35. Influence of hot isostatic pressing and forging on the microstructure and mechanical properties of Cu-3Ag-1Zr alloys10.1016/j.matdes.2019.107676 ↗