Strain localization and delamination mechanism of cold-drawn pearlitic steel wires during torsion
Source abstract
Abstract
Abstract Pearlitic steel wires are cold-drawn in order to attain high strength from the alignment of the pearlite colonies along the wire axis, as well as achieve a considerable reduction in the thickness of the ferrite lamellae. However, this high level of stress, in addition to surface defects and residual stresses, drastically decreases the strain ductility in tension and often in torsion. A significant limitation in torsion is the nucleation and growth of delamination cracks which propagate along the wire. Although this fracture phenomenon has long been studied, its origin and the underlying mechanisms remain debatable. This paper presents new microstructure investigations of drawn wires during torsion. The stages of initiation and propagation are defined towards a chronology of the development phases of delamination cracks based on the study of the microstructure of cold-drawn pearlitic steel wires before and after torsion. The curling of the grains leads to the creation of long grooves on the surface of the wire. These grooves increase stress concentration during twisting, thus localizing the formation of shear bands. Deformation and strain rate are so high in these bands that nanograins (10–30 nm) are formed. The delamination then appears to be mainly due to the localization of the single-shear deformation along the wire axis with mainly intergranular crack propagation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. The structure and properties of drawn pearlite10.1016/0001-6160(66)90296-3 ↗
2. Metallic composites processed via extreme deformation: toward the limits of strength in bulk materials10.1557/mrs2010.703 ↗
3. Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wire10.1016/j.actamat.2012.03.006 ↗
4. Segregation stabilizes nanocrystalline bulk steel with near theoretical strength10.1103/PhysRevLett.113.106104 ↗
5. Microstructures dominating ductility of eutectoid pearlitic steels10.2320/jinstmet1952.42.7_708 ↗
6. The effect of transformation temperature and prior austenite grain size on the pearlite colony size in vanadium treated pearlitic steels10.1016/0036-9748(87)90207-9 ↗
7. A transmission-electron-microscopy study of the substructure of high-purity pearlite10.1016/S1044-5803(97)00122-8 ↗
8. Electron backscatter diffraction on pearlite structures in steel10.1111/j.1365-2818.2006.01702.x ↗
9. Nucleation of austenite from pearlitic structure in an Fe–0.6C–1Cr alloy10.1016/j.scriptamat.2008.11.041 ↗
10. A study of the deformation of patented steel wire10.1007/BF02811557 ↗
11. Deformation of pearlite10.1007/BF02661567 ↗
12. Effect of cumulative cold drawing on the pearlite interlamellar spacing in eutectoid steel10.1016/S1359-6462(98)00166-3 ↗
13. Evolution of cementite morphology in pearlitic steel wire during wet wire drawing10.1016/j.matchar.2009.10.007 ↗
14. Hierarchical structures in cold-drawn pearlitic steel wire10.1016/j.actamat.2013.04.057 ↗
15. Influence of microstructures and textures on the torsional behavior of pearlitic wires
16. Effect of cumulative strain on texture characteristics during wire drawing of eutectoid steels10.1016/j.scriptamat.2008.06.048 ↗
17. Deformation textures in wire drawn perlitic steel10.1007/s12289-009-0410-3 ↗
18. <110> Fiber texture evolution of ferrite wires during drawn-torsion and drawn-annealing-torsion process10.1016/S1005-0302(12)60166-2 ↗
19. Relationship between mesoscale structure and ductility of drawn high carbon steel wire10.1016/j.msea.2020.140283 ↗
20. Influence of texture on the torsional deformation behavior of drawn pearlitic carbon steel wires
21. Evolution of crystallographic texture in thin wires10.1107/S0021889892004849 ↗
22. Microstructure evolution in pearlitic steels during wire drawing10.1016/S1359-6454(02)00281-1 ↗
23. Microstructural changes during deformation of [011] fiber-textured metals
24. Ciels de Van Gogh et propriétés mécaniques
25. Cementite dissolution in heavily cold drawn pearlitic steel wires10.1016/S1359-6454(96)00216-9 ↗
26. Comparative study and quantification of cementite decomposition in heavily drawn pearlitic steel wires10.1016/j.msea.2015.07.048 ↗
27. Cold-drawn pearlitic steel wires10.1016/j.pmatsci.2016.06.001 ↗
28. Strain-induced dissolution of cementite in cold-drawn pearlitic steel wires10.1007/s11661-020-05640-4 ↗
29. Void initiation and microstructural changes during wire drawing of pearlitic steels10.1016/0921-5093(95)09826-7 ↗
30. Atomic-scale quantification of grain boundary segregation in nanocrystalline material10.1103/PhysRevLett.112.126103 ↗
31. Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel10.1016/j.actamat.2014.10.027 ↗
32. Modeling of the delamination of high strength steel wire
33. Deformation analysis of surface flaws in stainless steel wire drawing10.1016/j.jmatprotec.2005.02.125 ↗
34. Process design of multi-stage wet wire drawing for improving the drawing speed for 0.72 wt% C steel wire10.1016/j.jmatprotec.2010.01.007 ↗
35. Cold drawn steel wires—processing, residual stresses and ductility—part I: metallography and finite element analyses
36. Tensile fracture behavior of progressively-drawn pearlitic steels10.3390/met6050114 ↗
37. Microstructures and mechanical properties of as-drawn and laboratory annealed pearlitic steel wires10.1007/s11661-017-4269-5 ↗
38. Non-monotonic radial distribution of tensile yielding in cold-drawn pearlitic wire10.1080/02670836.2017.1352642 ↗
39. Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire10.1016/j.actamat.2011.02.017 ↗
40. Torsion delamination and recrystallized cementite of heavy drawing pearlitic wires after low temperature annealing10.1016/j.msea.2017.12.055 ↗
41. On the analysis of delamination fractures in high-strength steels10.1007/BF02647002 ↗
42. Torsion tests as a tool for high strength wire evaluation
43. Nanostructure and mechanical properties of heavily cold-drawn steel wires10.1016/j.msea.2008.12.036 ↗
44. Origin and mechanism of torsion fracture in cold-drawn pearlitic steel wires10.1007/s10853-013-7347-0 ↗
45. Failure analysis of motor tire bead wires during torsion test10.1007/s11668-013-9750-x ↗
46. Phenomena associated with the torsional deformation of steel wires
47. Effect of interlamellar spacing on the delamination of pearlitic steel wires10.1016/1359-6462(96)00183-2 ↗
48. Fracture mechanics aspects of delamination occurrence in high-carbon steel wire
49. Fragmentation of as-drawn pearlitic steel wires during torsion tests10.1016/S0013-7944(98)00023-X ↗
50. Nature of delamination cracks in pearlitic steels10.1016/j.scriptamat.2015.09.004 ↗
51. Effect of small drawing reductions on residual surface stresses in thin cold-drawn steel wire, as measured by X-Ray diffraction10.1179/mst.1985.1.1.41 ↗
52. Fundamental aspects of torsional loading
53. A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis10.1016/j.micron.2007.12.003 ↗
54. Coupled microstructural observations and local texture measurements with an automated crystallographic orientation mapping tool attached to a TEM10.1002/mawe.200500923 ↗
55. Microstructure and texture evolution in fully pearlitic steel during wire drawing10.1007/s11431-013-5184-7 ↗
56. Measurement of texture gradient in heavily cold-drawn pearlitic wires
57. Crystallographic texture difference between center and sub-surface of thin cold-drawn pearlitic steel wires10.1007/s11665-014-1098-1 ↗
58. Microstructure and mechanical properties of cold-drawn pearlitic wires affect by inherited texture10.1016/j.matdes.2015.04.036 ↗
59. A parameter for measuring the magnitude of a change of strain path: validation and comparison with experiments on low carbon steel10.1016/0749-6419(94)90013-2 ↗
60. Torsional modelisation of the torsion texture of steel cord10.4028/www.scientific.net/MSF.408-412.457 ↗
61. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
62. Formation of nanocrystalline structure in pearlitic steels by dry sliding wear, Mater10.1016/j.matchar.2017.05.031 ↗
63. On the microstructure evolution and nanocrystalline formation of pearlitic wheel material in a rolling-sliding contact10.1016/j.matchar.2020.110333 ↗
64. Fracture behavior of nanostructured heavily cold drawn pearlitic steel wires before and after annealing10.1016/j.msea.2017.09.010 ↗
65. Crack path identification in a nanostructured pearlitic steel using atom probe tomography10.1016/j.scriptamat.2017.08.025 ↗
66. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗