Excellent strength-ductility combination of multi-layered sheets composed of high-strength V10Cr10Fe50Co30 high entropy alloy and 304 austenitic stainless steel
Source abstract
Abstract
Abstract When a high-entropy alloy (HEA) and an austenitic stainless steel (STS) are combined to produce a multi-layered sheet (MLS), the synergic effects of maximized body-centered-cubic(BCC) transformation-induced plasticity (TRIP) occurring in both HEA and STS on excellent tensile properties are expected. In this study, the tensile properties of STS/HEA/STS MLS, fabricated by hot-roll bonding, were compared with those of monolithic HEA and STS sheets. Both the HEA and STS layers of the MLS consisted of FCC grains, while some BCC grains occurred mostly in the HEA layer. The measured tensile properties were higher than the calculated values based on the rule of mixtures, and showed very high levels of tensile strength (803 and 1774 MPa at 25 °C and −196 °C, respectively) with sufficient elongation (44% and 72%, respectively). This result was attributed to the robust TRIP mechanism occurring step-by-step in the HEA and STS layers, along with the accommodation of the strain gradient near the strongly bonded HEA/STS interface. The step-by-step TRIP played a leading role in tuning the enormous BCC-TRIP occurring in both the HEA and STS layers, while taking complete advantage of the high strength–ductility balance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
2. Tensile and microstructural characteristics of Fe-24Mn steel welds for cryogenic applications10.1007/s12540-019-00320-4 ↗
3. Microstructural evolution and low temperature impact toughness of a Fe-13%Cr-4%Ni-Mo martensitic stainless steel10.1016/j.msea.2009.08.022 ↗
4. Cryogenic impact testing of metallic glass matrix composites10.1016/j.scriptamat.2011.11.011 ↗
5. Cryogenic fracture toughness of 9%Ni steel flux cored arc welds10.1016/j.jmatprotec.2017.10.026 ↗
6. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
8. Exceptional damage-tolerance of medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
9. Plastic deformation behavior of 40Fe-25Ni-15Cr-10Co-10V high-entropy alloy for cryogenic applications10.1007/s12540-018-0184-6 ↗
10. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
11. Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy10.1038/s41467-020-14641-1 ↗
12. FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35-x medium-entropy alloys
13. Ultrastrong duplex high-entropy alloy with 2GPa cryogenic strength enabled by an accelerated martensitic transformation10.1016/j.scriptamat.2019.06.026 ↗
14. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperature10.1016/j.actamat.2018.09.057 ↗
15. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
16. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
17. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗
18. Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel10.1007/s11661-006-0130-y ↗
19. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
20. Simultaneous strength-ductility enhancement of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy by cryo-rolling and annealing10.1038/s41598-018-21385-y ↗
21. Enhancement strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
22. Tensile properties of cold-rolled TWIP-cored three-layer steel sheets10.1016/j.msea.2017.01.046 ↗
23. Effects of the rolling temperature on microstructure and mechanical properties of 2Cr13/316L laminated composites prepared by accumulative roll-bonding (ARB)10.1016/j.matchar.2018.03.001 ↗
24. Excellent combination of cryogenic-temperature strength and ductility of high-entropy-alloy cored multi-layered sheet10.1016/j.jallcom.2019.05.088 ↗
25. Evolution of structure and fabrication of Cu/Fe multilayered composites by a repeated diffusion-rolling procedure10.1016/j.matdes.2015.07.082 ↗
26. Ultra-high strength and excellent ductility in multi-layer steel sheet of austenitic hadfield and martensitic hot-press-forming steels10.1016/j.msea.2019.05.046 ↗
27. The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status10.1016/j.msea.2016.10.033 ↗
28. Multilayer “steel/vanadium alloy/steel” hybrid material obtained by high-pressure torsion at different temperatures10.1007/s11661-017-4342-0 ↗
29. Microstructure evolution of multilayered composite sheets of AA1050/AA7050 Al alloys produced by Asymmetric Accumulative Roll-Bonding10.1016/j.matchar.2020.110226 ↗
30. The role of shear strain during Accumulative Roll-Bonding of multilayered composite sheets: pattern formation, microstructure and texture evolution10.1016/j.msea.2020.140055 ↗
31. Tailoring of interface structure and mechanical properties in ARBed 1100/7075 laminated composites by cold rolling10.1016/j.msea.2019.03.075 ↗
32. Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite10.1016/j.actamat.2014.10.032 ↗
33. Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions10.1016/j.msea.2018.04.115 ↗
34. High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing10.1007/s10853-018-03291-w ↗
35. Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy10.1016/j.jallcom.2019.151864 ↗
36. Effects of deformation-induced BCC martensitic transformation and twinning on impact toughness and dynamic tensile response in metastable VCrFeCoNi high-entropy alloy10.1016/j.jallcom.2019.01.293 ↗
37. Microstructure and mechanical properties of the CrMnFeCoNi high-entropy alloy
38. Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy10.1016/j.msea.2018.11.136 ↗
39. Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys10.1016/j.msea.2018.03.115 ↗
40. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗
41. Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature10.1016/j.msea.2019.01.041 ↗
42. Effects of transformation-induced plasticity (TRIP) on tensile property improvement of Fe45Co30Cr10V10Ni5-xMnx high-entropy alloys10.1016/j.msea.2019.138809 ↗
43. Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2020.156633 ↗
44. Effect of carbon on cryogenic tensile behavior of CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2019.152000 ↗
45. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.matchemphys.2017.06.023 ↗
46. Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures10.1007/s40843-018-9373-y ↗
47. Wu · 2014
48. Deformation mechanisms of FeCoCrNiMo0.2 high entropy alloy at 77 and 15K10.1016/j.scriptamat.2019.11.026 ↗
49. Microstructure and mechanical properties of CoCrFeMnNiSnx high-entropy alloys10.1007/s12540-019-00328-w ↗
50. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
51. Deformation microstructure and deformation-induced martensite in austenitic Fe-Cr-Ni alloys depending on stacking fault energy10.1007/s11661-016-3839-2 ↗
52. Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy10.1016/j.scriptamat.2015.05.041 ↗
53. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
54. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
55. EBSD study of damage mechanisms in a high-strength ferrite-martensite dual-phase steel10.1007/s11665-014-1257-4 ↗
56. Strain partitioning and texture evolution during cold rolling of AISI 201 austenitic stainless steel10.1016/j.msea.2017.07.010 ↗
57. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
58. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
59. Back-stress effect on the mechanical strength of TWIP-IF steels layered sheet10.1007/s12540-019-00258-7 ↗
60. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗