journal article·2022-01

Influence of V additions on microstructures, tensile and fatigue properties of Al–Zn–Mg alloys

Ke-Da Jiang, Zhen Zhang, Wen-Bo Zhu, Qing-Lin Pan, Yun-Lai Deng, Xiao-Bin Guo

Publisher page

Abstract

Abstract V addition with range from 0–0.09 wt% are added in extruded Al–Zn–Mg alloys to study the influence of V addition induced microstructures on the tensile strength and fatigue properties of Al–Zn–Mg alloys under T74 temper. The V addition significantly inhibits the recrystallization behavior of the alloy via forming Al23V4 second phase particles, and the formation of coarse grain layer on the profile surface is gradually inhibited. The aging hardening curve, tensile strength, and fatigue strength of Al–Zn–Mg alloy with different V content are studied. It is discovered that an increase of V content obviously improves the tensile properties and the median fatigue strength of the investigated alloy, but has little effect on the aging hardening rate of the investigated alloys. In fact, the alloy with 0.09 wt% V content has the highest tensile properties, and its tensile strength and yield strength are 374.4 and 329.0 MPa, respectively. The alloy with 0.05 wt% V content achieves the maximum median fatigue strength, which is 183.6 MPa. After T74 aging treatment, the main strengthening mechanism is Orowan bypass strengthening mechanism. However, the excessive V addition has limited effect on the strength improvement of the studied alloys, and has adverse effects on tensile toughness and fatigue strength, mainly because the V atoms will agglomerate in the aluminum matrix and form micron-sized coarse V-rich particles, with an average particle size of about 10 μm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Effect of composition on tensile properties and fracture toughness of Al–Zn–Mg alloy (A7N01S-T5) used in high-speed trains10.1016/j.matdes.2015.11.107 ↗
2. Influence of heat treatment on the strength and fracture toughness of 7N01 aluminum alloy10.1016/j.jallcom.2016.03.228 ↗
3. Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process10.1016/j.matdes.2014.10.045 ↗
4. Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al–Zn–Mg alloy10.1016/j.corsci.2013.07.032 ↗
5. Hot deformation behavior of as-quenched 7005 aluminum alloy10.1016/S1003-6326(14)63411-7 ↗
6. Hot deformation behavior and constitutive equation of a new type Al–Zn–Mg–Er–Zr alloy during isothermal compression10.1016/j.msea.2015.10.122 ↗
7. Influence of Al7Cu2Fe intermetallic particles on the localized corrosion of high strength aluminum alloys10.1016/j.matdes.2013.07.003 ↗
8. Influence of dual retrogression and re-aging temper on microstructure, strength and exfoliation corrosion behavior of Al–Zn–Mg–Cu alloy10.1016/S1003-6326(11)61248-X ↗
9. The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA715010.1016/j.corsci.2011.08.042 ↗
10. Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy10.1016/j.matdes.2011.09.033 ↗
11. A study of rapidly hardened aluminum alloys with iron and vanadium10.1007/s11041-010-9188-7 ↗
12. Criteria for developing castable, creep-resistant aluminum-based alloys-A review10.3139/146.101249 ↗
13. Davis · 1993 · 23
14. Humphreys · 2004 · 169
15. Dispersion hardening in Al–V by plasma-jet spray-quenching10.1016/0001-6160(68)90017-5 ↗
16. Rapid solidification of aluminum-rich Al–V alloys10.1016/0025-5416(88)90156-5 ↗
17. Age hardening in rapidly solidified Al–V–Zr alloy
18. Microstructural characterization of rapidly solidified Al–Fe–Si, Al–V–Si, and Al–Fe–V–Si alloys10.1557/JMR.2001.0287 ↗
19. Microstructure and chemistry of Al–V–Fe–Si nanoquasicrystalline alloys10.1016/S0921-5093(00)01580-X ↗
20. Precipitation during infiltration of A201 aluminum alloy into Al–Fe–V–Si preform10.1016/1359-6462(95)00630-3 ↗
21. Effect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al–6063 commercial alloy10.1007/s10853-006-0794-0 ↗
22. Influences of nickel and vanadium impurities on microstructure of aluminum alloys
23. Effect of vanadium and beryllium on S′ (Al2CuMg) precipitation in Al–Li–Cu–Mg alloy 8090
24. Effect of vanadium on the microstructures and mechanical properties of an Al–Mg–Si–Cu–Cr–Ti alloy of 6XXX series10.1016/j.jallcom.2013.03.239 ↗
25. Effect of trace element vanadium on superplasticity of 5083 aluminium alloy sheets10.1007/s11431-011-4714-4 ↗
26. Effects of vanadium and chromium addition on S′-phase precipitation in a 2091 aluminum alloy10.2320/jinstmet1952.59.3_251 ↗
27. Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al–Si–Mg alloy10.1016/j.msea.2014.02.053 ↗
28. Effects of V addition on recrystallization resistance of 7150 aluminum alloy after simulative hot deformation10.1016/j.matchar.2014.07.028 ↗
29. Grains, phase, and interfaces: an interpretation of microstructure
30. Underwood · 1970
31. 2012
32. Fatigue test methods and their data processing methods of metallic materials
33. Gb/T 24176 · 2009
34. Distribution of Al3Zr precipitates in Al–Zn–4.5Mg
35. Recrystallisation and texture in hot deformed aluminium alloy 7010 thick plates10.1179/mst.1996.12.9.717 ↗
36. Lamb · 2016
37. Murray · 1992
38. An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy10.1016/0001-6160(70)90016-7 ↗
39. Development of Al–Zn–Mg–Cu alloys for aircraft
40. Calorimetric and resistivity study of formation and redissolution of precipitates in 7050 Aluminum Alloy10.2320/matertrans1989.39.69 ↗
41. Influence of zinc to magnesium ratio and total solute content on the strength and toughness of 7xxx series alloys10.4028/www.scientific.net/MSF.519-521.339 ↗
42. Microstructure and properties of high strength aluminium alloys for structural applications10.1007/s12666-009-0015-z ↗
43. Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications10.1016/S0921-5093(03)00653-1 ↗
44. Effect of multi-stage aging treatments on the precipitation and mechanical properties of Al–Zn–Mg alloys10.1016/j.msea.2020.139394 ↗