journal article·2021-05

Influence of microstructural heterogeneity on strain partitioning behavior of metals containing columnar grains

Nan Wang, Yongnan Chen, Gang Wu, Qinyang Zhao, Zhen Zhang, Lixia Zhu, Jinheng Luo

Publisher page

Abstract

Abstract This work elaborates detailed strain partitioning mechanisms of the weld metals containing both equiaxed and columnar grains under tensile stress by multiple analysis methods. The results show that weld metals exhibit the multi-level strain partitioning behaviors, among which the columnar grains form the typical strain gradient, which appears as the alternating structure of strain-free and strained bands. The formation of the strain-free bands is due to the plastic flow of individual columnar grains being restricted by the back stress. More importantly, the micro-strain gradient with alternating distribution of high-density and low-density dislocation zone is formed in the strained bands. This gradient structure further promotes the accumulation of masses of GNDs at the boundaries and twin boundaries, thereby enhancing work hardening. Compared to equiaxed grains, this novel multi-level strain gradients structures seriously hinder the slip and proliferation of the SSD-type dislocations in the columnar grains. The strengthening structure formed thereby makes the strain values of the columnar grains always stay at a very low level.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
2. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
3. Deformation heterogeneity in laser-welded Eurofer10.1016/j.fusengdes.2020.111860 ↗
4. On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques10.1016/j.actamat.2019.05.036 ↗
5. On the origin of cell walls and of lattice misorientations during deformation10.1016/0036-9748(80)90343-9 ↗
6. Energetic approach to subgrain formation10.1016/j.msea.2004.01.069 ↗
7. Instability origin of subgrain formation in plastically deformed materials10.1016/j.ijengsci.2010.09.017 ↗
8. Modeling of morphological evolution of columnar dendritic grains in the molten pool of gas tungsten arc welding10.1016/j.commatsci.2014.07.052 ↗
9. Effect of cyclic plastic deformation on microstructure and mechanical properties of weld metals used for reel-lay pipeline steels10.1016/j.msea.2018.09.036 ↗
10. Effect of microstructure on strain hardening and strength distributions along a Cr-Ni-Mo-V steel welded joint10.1016/j.matdes.2014.09.076 ↗
11. Application HTP process to produce X80 strip for 2nd West-East gas pipeline project
12. Investigation on micromechanism involved in ferrite hardening after prestraining of dual-phase steel10.1016/j.msea.2020.140387 ↗
13. Fatigue performance of pre-strained pipes with girth weld defects: local deformation mechanisms under bending10.1016/j.ijfatigue.2007.08.001 ↗
14. Effects of pipe steel heterogeneity on the tensile strain capacity of a flawed pipeline girth weld10.1016/j.engfracmech.2013.11.003 ↗
15. Influence of pipe steel heterogeneity of the upper bound tensile strain capacity of pipeline girth welds: a validation study10.1016/j.engfracmech.2016.03.042 ↗
16. The effect of dislocation contrast on x‐ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
17. Comparison of the dislocation density in martensitic steels evaluated by some x-ray diffraction methods10.2355/isijinternational.50.875 ↗
18. Microstructural and mechanical characteristics of 308L stainless steel manufactured by gas metal arc welding-based additive manufacturing10.1016/j.matlet.2020.127791 ↗
19. Plastic deformation throughout strain-induced phase transformation in additively manufactured maraging steels10.1016/j.matdes.2020.109289 ↗
20. Multiple slip in a strain-gradient plasticity model motivated by a statistical-mechanics description of dislocations10.1016/j.ijsolstr.2004.10.025 ↗
21. Experimental determination of deformation induced lattice rotation by EBSD technique for slip system analysis10.1016/j.jmst.2016.01.010 ↗
22. Investigation on micromechanism of ferrite hardening after pre-straining with different strain rates of dual-phase steel10.1016/j.msea.2020.140657 ↗
23. EBSD study of micromechanisms involved in high deformation ability of DP steels10.1016/j.matdes.2015.07.134 ↗
24. Analysis of size effects associated to the transformation strain in TRIP steels with strain gradient plasticity10.1016/j.euromechsol.2009.08.001 ↗
25. Microhardness profile prediction of a graded steel by strain gradient plasticity theory10.1016/j.commatsci.2011.01.014 ↗
26. Stress-strain partitioning behavior and mechanical properties of dual-phase steel using finite element analysis10.1016/j.mtcomm.2020.101658 ↗
27. Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel10.1016/j.actamat.2020.05.062 ↗
28. The microstructural origin of work hardening stages10.1016/j.actamat.2018.02.002 ↗
29. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels10.1016/j.msea.2020.139039 ↗
30. Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
31. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
32. A Review of the stages of work hardening10.4028/www.scientific.net/SSP.35-36.1 ↗
33. Tensile stress-strain analysis of dual-phase structures in an Mn-Cr-Si steel10.1016/0025-5416(87)90179-0 ↗