Effect of tungsten content on dynamic compressive properties of borosilicate glass/tungsten composites at elevated temperatures
Source abstract
Abstract
Abstract An investigation was conducted to evaluate the dynamic compressive properties of glass/tungsten composites containing 20–50 vol% tungsten at a strain rate of 3 × 103 s−1 and at elevated temperatures in the range from 450 °C to 775 °C. Results show that the tungsten particles are more uniformly distributed in the glass matrix with increasing tungsten content. The strengths of the composites decrease while the ultimate strains increase gradually together with the occurrence of the brittle-to-ductile transition with increasing testing temperature. Increasing the tungsten content from 20 to 50 vol% leads to a gradual decrease of the brittle-to-ductile transition temperature from 685 °C to 455 °C and a gradual extension of the interval between the brittle-to-ductile transition temperature and 775 °C at which all the composites lose their bearing capacity from 90 °C to 320 °C, because the tungsten phase plays a principal role in the deformation of the composite containing 50 vol% glass with the assistance of the adiabatic temperature rise caused by tungsten deformation at high strain rate while the glass matrix initiates deformation mainly for the composites with glass content over 67 vol%. The deformation is mainly undertaken by the glass phase in the 80BH/20W and 67BH/33W composites while it is shared by tungsten particles and the glass matrix in the 50BH/50W composite. The cracks are primarily initiated along the interface between the glass matrix and tungsten phase in the composites with glass content over 67 vol% resulted from the mismatched deformation between tungsten particles and the glass matrix, whereas they originate from trans-granular fracture of elongated tungsten particles in the 50BH/50W composite attributed to the participation of more tungsten particles in the deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Relation between apparent glass transition temperature and liquids temperature for inorganic glasses10.1016/0022-3093(71)90053-6 ↗
2. Glass as a shaped charge liner material
3. Internal shearing during shaped charge jet formation and break-up10.1002/prep.19920170108 ↗
4. Characterization and comparison of microstructures in the shaped-charge regime: copper and tantalum10.1016/1044-5803(93)90022-N ↗
5. Dynamic recrystallization of tungsten in a shaped charge liner10.1016/j.scriptamat.2008.10.028 ↗
6. Fracture of a brittle particulate composite10.1007/BF00549316 ↗
7. Strength and fracture toughness of indented glass-nickel compacts10.1007/BF00550587 ↗
8. Inclusion-size-independent strength of glass/particulate metal composites10.1111/j.1151-2916.1988.tb05080.x ↗
9. Glass-ceramic-metal composites for making graded seals in prosthetic devices10.1007/BF00692974 ↗
10. Preparation, microstructure and mechanical properties of metal-particulate/glass-matrix composites10.1016/S0266-3538(96)00102-9 ↗
11. Investigation of the mechanical properties of Mo-reinforced glass-matrix composites10.1016/j.jnoncrysol.2004.07.030 ↗
12. Mechanical performance and fracture behaviour of glass-matrix composites reinforced with molybdenum particles10.1016/j.compscitech.2004.12.035 ↗
13. Mechanical behaviour of borosilicate glass-copper composites10.1016/S1359-835X(97)00052-3 ↗
14. Thermophysical properties of Alumina particle reinforced glass matrix composites10.1111/j.1744-7402.2012.02806.x ↗
15. Toughening effects quantification in glass matrix composite reinforced by alumina platelets10.1016/j.actamat.2008.02.024 ↗
16. Mechanical properties of alumina fiber/glass matrix composites with and without a tin dioxide interface10.1016/S0921-5093(99)00115-X ↗
17. Characterisation of glass matrix composites reinforced with lead zirconate titanate particles10.1016/j.msea.2005.03.085 ↗
18. Preparation and dynamic mechanical properties at elevated temperatures of a tungsten/glass composite10.1007/s11665-018-3230-0 ↗
19. Synthesis of ultrafine/nanocrystalline W-(30-50)Cu composite powders and microstructure characteristics of the sintered alloys10.1016/j.ijrmhm.2011.06.011 ↗
20. Effect of copper content on the dynamic compressive properties of fine-grained tungsten copper alloys10.1016/j.msea.2018.04.117 ↗
21. Review of experimental techniques for high rate deformation and shock studies10.1016/j.ijimpeng.2004.03.005 ↗
22. A tensile testing technique for fibre-reinforced composites at impact rates of strain10.1007/BF00542078 ↗
23. Fracture in annealed and severely deformed tungsten10.1016/j.msea.2018.05.004 ↗
24. Influence of microstructure and notch fabrication on impact bending properties of tungsten materials10.1016/j.ijrmhm.2010.04.010 ↗
25. Microstructural evolution and deformation mechanism of the 80W-20Cu alloy at ultra-high strain rates under explosive loading10.1016/j.msea.2013.02.020 ↗
26. The strain rate and temperature dependence of the dynamic impact response of tungsten composite10.1016/S0921-5093(98)00852-1 ↗