journal article·2026-09Open access

Evolution of the mechanical performance of a non-equiatomic Zr-Hf-Ti-Al-Co-Ni-Cu high entropy metallic glass through crystallization

S. González, J. López, A. Ridruejo, G. Alvarez, S.P. Singh, Y. Kong, M. Torres, Devinder Singh, P. Ramasamy, J. Eckert, A. Bautista, F. Velasco

Abstract

The effectiveness in tuning the mechanical performance of a novel fully amorphous Zr 35.7 Hf 19.1 Ti 5.5 Al 12.3 Co 7 Ni 11 Cu 9.4 at. % High Entropy Metallic Glass (HEMG) upon crystallization, has been studied. The activation energy for nucleation (E p = 416.61 kJ/mol) is greater than for growth (E x = 361.51 kJ/mol), thus indicating high thermal stabililty. When heating up to 1000 K at 20 K/min, two partially overlapping DSC transformations are observed. The initial transformation, at 781 K, is associated with the formation of Zr 6 Al 2 Co dendrites embedded within an amorphous matrix. This results in a hardness increase from 7.69 GPa in the amorphous state, to 9.11 GPa, while the wear resistance, assessed from the H/E r and H 3 /Er 2 ratios, increases from 0.071 and 0.038 to 0.084 and 0.064, respectively. For the second transformation at 870 K, a metastable black spot phase characterized by a hierarchical structure and larger Zr 6 Al 2 Co dendrites, due to the continuous growth, is observed. This microstructure results in a maximum hardness of 10.08 GPa, but the wear resistance decreases slightly. Crystallization to a higher temperature, 1000 K for 2 h, results in a decrease of both, the hardness and of the wear resistance. These results show that for the initial stages of crystallization, the hardness and wear resistance of Zr 35.7 Hf 19.1 Ti 5.5 Al 12.3 Co 7 Ni 11 Cu 9.4 at. % HEMG is enhanced. The large variation in mechanical properties upon crystallization of this alloy presents considerable potential to modify the local mechanical properties of microengineering components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Shape Memory Alloy Transformations · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
2. High-entropy alloys10.1038/s41578-019-0121-4 ↗
3. Ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
4. Bulk glass formation of Ti-Zr-Hf-Cu-M (M= Fe, Co, Ni) alloys10.2320/matertrans.43.277 ↗
5. In vitro and in vivo studies on biodegradable CaMgZnSrYb high-entropy bulk metallic glass10.1016/j.actbio.2013.01.029 ↗
6. Septenary zr–hf–ti–al–co–ni–cu high-entropy bulk metallic glasses with centimeter-scale glass-forming ability10.1016/j.mtla.2019.100372 ↗
7. Thermal behavior of newly developed Zr33Hf8Ti6Cu32Ni10Co5Al6 high-entropy bulk metallic glass
8. Mechanical properties of two novel non-equiatomic zr-hf-ti-cu-ni-co-al high Entropy Alloys with high glass forming ability10.1016/j.jallcom.2025.180196 ↗
9. High thermal stability and sluggish crystallization kinetics of high-entropy bulk metallic glasses10.1063/1.4955060 ↗
10. Vapor-deposited high-entropy metallic glasses10.1021/acs.jpcb.4c04677 ↗
11. Nanoscale mechanical and tribological properties of plasma nanotextured COP surfaces with hydrophobic coatings10.1002/ppap.201500023 ↗
12. Microstructure and tribological properties of TiSiCN composite coatings with different carbon contents deposited by plasma‐enhanced magnetron sputtering10.1002/sia.7250 ↗
13. Sliding wear investigation of Ni-based coating for high-temperature application10.24874/ti.945.08.20.11 ↗
14. Comparative Study of tribomechanical properties of HiPIMS with positive pulses DLC coatings on different tools steels10.3390/coatings11010028 ↗
15. Correlating mechanical properties and anti-wear performance of tribofilms formed by ionic liquids, ZDDP and their combinations10.1016/j.wear.2016.03.003 ↗
16. SiC- and ag-sic-doped hydroxyapatite coatings grown using magnetron sputtering on Ti alloy for biomedical application10.3390/coatings12020195 ↗
17. Structural characterization of a composite joint prepared during laser welding of Ti–22Al–27Nb intermetallic alloy with an interlayer of cu-hf-ni-ti-zr high entropy bulk metallic glass10.1016/j.compositesb.2022.110167 ↗
18. Assessment of the toughness of thin coatings using nanoindentation under displacement control10.1016/j.tsf.2005.08.176 ↗
19. On the effective load during nanoindentation creep testing with continuous stiffness measurement (CSM)10.1557/s43578-021-00235-0 ↗
20. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
21. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation measurements10.1557/JMR.1992.1564 ↗
22. Composition design strategy for high Entropy amorphous alloys10.3390/ma17020453 ↗
23. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
24. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
25. Crystallization kinetics in Cu46Zr45Al7Y2 bulk metallic glass by differential scanning calorimetry (DSC)10.1016/j.jnoncrysol.2010.12.071 ↗
26. The influence of temperature on nucleation and growth rates in metal crystals
27. A review on the glass formation behavior of high-entropy metallic glasses
28. Substituted W sub 5 Si sub 3 - and Zr sub 6 Al sub 2 Cotype phases formed in the zirconium-antimony and zirconium-tin systems with iron group metals10.1021/cm00011a017 ↗
29. Consolidation behavior of L12 phase (Al + 12.5 at. % Cu)3Zr powder with nanocrystalline structure during CIP and subsequent sintering10.1016/j.msea.2004.03.001 ↗
30. Changes in microstructure, solidification path and hydrogen permeability of nb–hf–co alloy by adjusting Hf/Co ratio10.1016/j.ijhydene.2015.12.023 ↗
31. Porous NiCu alloy cathode with oriented pore structure for hydrogen evolution reaction by freeze casting10.1007/s10934-019-00751-9 ↗
32. Cullity · 2001
33. Effect of copper on the Formation of L12 intermetallic phases in al–cu–x (X = Ti, Zr, Hf) alloys10.3390/met12122067 ↗
34. Properties influencing wear of metals
35. Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks10.1557/PROC-383-447 ↗
36. The deformation and ageing of mild steel: II characteristics of the lüders deformation10.1088/0370-1301/64/9/302 ↗
37. N.J. Petch. The cleavage strength of polycrystals. J. Iron Steel Inst., 174 (1653) 25. DOI: 10.4236/jmmce.2017.56032.10.4236/jmmce.2017.56032 ↗
38. Iron-based bulk metallic glasses10.1179/1743280412Y.0000000007 ↗
39. Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation
40. Nucleation of shear bands in amorphous alloys10.1073/pnas.1321518111 ↗
41. Achieving cryogenic wear resistance of MoS2 beyond conventional lubricity: an atomistic simulation study10.1016/j.triboint.2026.112053 ↗
42. Design and characterization of metallic glass/graphene multilayer with excellent nanowear properties10.1007/s40544-021-0581-6 ↗
43. Atomic insights into the deformation mechanism of an amorphous wrapped nanolamellar heterostructure and its effect on self-lubrication10.1016/j.jmrt.2023.08.215 ↗
44. Thickness of shear bands in metallic glasses
45. Influence of loading rate on the mechanical performance of metallic glass10.1016/j.jnoncrysol.2017.05.023 ↗
46. Atomic-scale homogeneous plastic flow beyond near-theoretical yield stress in a metallic glass10.1038/s43246-021-00124-3 ↗
47. Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses10.1073/pnas.0806051105 ↗
48. Activation volume and energy of bulk metallic glasses determined by nanoindentation10.1016/j.matdes.2018.05.051 ↗
49. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
50. Shear bands in monolithic metallic glasses: experiment, theory, and modeling
51. On twinning and shear banding in copper single crystals with rolling texture orientations plane strain compressed at high strain rate10.1016/j.actamat.2024.119934 ↗
52. Discrete shear band plasticity through dislocation activities in body-centered cubic tungsten nanowires10.1038/s41598-018-23015-z ↗
53. Rate dependence of serrated flow in a metallic glass10.1557/JMR.2003.0103 ↗
54. Hardness and plastic deformation in a bulk metallic glass10.1016/j.actamat.2004.10.023 ↗
55. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
56. Yield strength predictions from the plastic zone around nanocontacts10.1016/S1359-6454(98)00301-2 ↗
57. Tuning the microstructure and mechanical properties of Al-based amorphous/crystalline composites by addition of Pd10.1016/j.intermet.2010.08.036 ↗