Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review
Source abstract
Abstract
Abstract Friction stir processing (FSP) is a new and exciting technique being extensively explored because of its thermo-mechanical surface modification which has the capability to enhance the mechanical, microstructural and tribological properties. Various studies were described on friction stir processed aluminium alloys using several reinforcement particles containing micro and nano size grains thereby the formation of homogeneous and identical microstructure. However, this review is mainly focused on Al-7075 alloy which is a potentially superplastic alloy for making metal matrix composites. In this review, the recent research progress in FSP is discussed in detail with particular emphasis on their preparing method, characterization and various mechanical properties including present challenges and future prospects. Though, a remarkable progress has been made during the past few years, the present status in materials processing is far from ideal, especially in obtaining desire composites by using single or dual reinforcements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. High strain rate superplasticity in a friction stir processed 7075 Al alloy10.1016/S1359-6462(99)00329-2 ↗
2. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
3. Friction stir processing: a new grain refinement technique to achieve high strain rate superplasticity in commercial alloys10.4028/www.scientific.net/MSF.357-359.507 ↗
4. Experimental thermal analysis of friction stir processing10.4028/www.scientific.net/MSF.539-543.3801 ↗
5. Development of a fine-grained microstructure and the properties of a nugget zone in friction stir welded pure copper10.1016/j.scriptamat.2007.03.048 ↗
6. Development of high strength, high conductivity copper by friction stir processing10.1016/j.matdes.2010.08.028 ↗
7. S. Cartigueyen, K. Mahadevan, Study of friction stir processed zone under different tool pin profiles in pure copper, IOSR J. Mech. Civil Eng. (IOSR-JMCE) 11(2 Ver. VII) (2014) 06–12.10.9790/1684-11270612 ↗
8. Experimental study on friction stir welding of copper metals10.1016/j.jmatprotec.2010.05.019 ↗
9. Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys10.1016/j.ijmachtools.2007.12.003 ↗
10. Peak stir zone temperatures during friction stir processing10.1007/s11661-009-0140-7 ↗
11. Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy10.1016/j.msea.2006.12.124 ↗
12. On the role of process variables in the friction stir processing of cast aluminum A319 alloy10.1016/j.matdes.2009.08.001 ↗
13. Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel10.1016/j.msea.2008.05.025 ↗
14. Effect of friction stir welding on microstructural and mechanical properties of copper alloy
15. High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semisolid stir casting combined with hot extrusion10.1016/j.msea.2014.12.089 ↗
16. Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles10.1016/j.matchemphys.2016.04.078 ↗
17. Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compo-casting method and study of its properties10.1016/j.jallcom.2011.08.105 ↗
18. The nano-sized TiC particle reinforced Al-Cu matrix composite with superior tensile ductility10.1016/j.msea.2014.11.006 ↗
19. Effect of hot rolling on Al-4.5%Cu alloy reinforced fly ash metal matrix composite
20. Through-thickness friction stir processing; a low-cost technique for fusion welds repair and modification in AA6061 alloy10.1016/j.jmapro.2018.08.006 ↗
21. Effect of equal channel angular pressing (ECAP) on microstructure and properties of Al-SiCp composites10.1016/j.matdes.2009.03.001 ↗
22. Fabrication of aluminum matrix composites reinforced with nano- tomicrometer-sized SiC particles10.1016/j.matdes.2015.09.130 ↗
23. Effect of friction stir processing (FSP) on microstructure and properties of Al-TiC in situ composite10.1016/j.msea.2011.02.085 ↗
24. Effect of Sc addition, friction stir processing, and T6 treatment on the damping and mechanical properties of 7055 Al alloy10.1016/j.jallcom.2018.09.109 ↗
25. Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites10.1016/j.jallcom.2017.08.084 ↗
26. Friction stir processing: a novel technique for fabrication of surface composite10.1016/S0921-5093(02)00199-5 ↗
27. Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing10.1016/j.jallcom.2013.10.013 ↗
28. Surface modification and nanocomposite layering of fastener-hole through friction-stir processing10.1080/10426914.2014.892619 ↗
29. Influence of rotational speed on the formation of friction stir processed zone in pure copper at low-heat input conditions10.1016/j.jmapro.2015.03.001 ↗
30. Friction stir processing strategies for uniform distribution of reinforcement in a surface composite10.1080/10426914.2015.1103869 ↗
31. Formation of wear resistant Al-SiC surface composite by laser melt-particle injection process10.1179/mst.1995.11.3.299 ↗
32. Enhancing strength, ductility and machinability of a Al-Si cast alloy by friction stir processing10.1016/j.jmapro.2015.01.005 ↗
33. Evolution behavior of TiB2 particles during laser welding on aluminum metal matrix composites reinforced with particles10.1016/S1003-6326(13)62628-X ↗
34. Some Investigations on friction stir processed zone of AZ91 alloy
35. Fabrication of TiCp/Ti-6Al-4V surface composite via friction stir processing (FSP): process optimization, particle dispersion refinement behavior and hardening mechanism10.1016/j.msea.2013.03.019 ↗
36. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing10.1016/j.msea.2008.11.067 ↗
37. Characterization of oxide dispersion strengthened copper-based materials developed by friction stir processing10.1016/j.matdes.2014.04.012 ↗
38. Microstructure and surface mechanical property of AZ31 Mg/SiCp surface composite fabricated by direct friction stir processing10.1016/j.matdes.2014.02.067 ↗
39. Effect of friction stir processing on microstructure and work hardening behavior of reduced activation ferritic/martensitic steel10.1016/j.jmapro.2018.11.026 ↗
40. Inhomogeneous microstructure and mechanical properties of friction stir processed NiAl bronze10.1016/j.msea.2009.06.013 ↗
41. Corrosion properties of friction stir processed cast NiAl bronze10.1016/j.corsci.2010.02.026 ↗
42. Microstructure evolution and tribological behavior of the solid lubricant based surface composite of cast nickel aluminum bronze developed by friction stir processing10.1016/j.jmatprotec.2016.07.009 ↗
43. RAO, Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing10.1016/j.dt.2014.08.003 ↗
44. Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement10.1080/10408436.2018.1490251 ↗
45. Fabrication of AA6061-0/RHA surface composite via friction stir processing10.4028/www.scientific.net/AMM.660.214 ↗
46. Manufacturing of nano-surface AA7075 composites by friction stir processing
47. Y. Bai, Y. Guo, J. Li, Z. Yang, J. Tian, Effect of Al2O3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy, J. Eng. Tribol. Doi: 10.1177/1350650116683627.10.1177/1350650116683627 ↗
48. Warm forming behavior of high strength aluminum alloy AA707510.1016/S1003-6326(11)61131-X ↗
49. Fabrication of Al7075 / B4C surface composite by novel Friction Stir Processing (FSP) and investigation on wear Properties10.1016/j.protcy.2016.03.058 ↗
50. Direct growth of ZnO nanostructures on the Zn electroplated mild steel to create the surface roughness and improve the corrosion protection of the electro-less Ni-P coating10.1016/j.mseb.2018.07.001 ↗
51. Fabrication of as-cast Al matrix composite reinforced by Al2O3/Al3Ni hybrid particles via in-situ reaction and evaluation of its mechanical properties10.1016/j.mseb.2018.09.002 ↗
52. A novel approach for development of surface nanocomposite by friction stir processing10.1016/j.msea.2010.07.024 ↗
53. Preparation of nano surface layer composite (TiB2) on 6061–T6 aluminum alloy via friction stir processing10.1016/j.matpr.2017.02.309 ↗
54. Dry sliding wear behavior of SiC and B4C-reinforced AA6351 metal matrix composite produced by stir casting process
55. Microstructure and material characterization of 6063/B4C and 1545K/B4C composites produced by two stir casting techniques for nuclear applications10.1016/j.jallcom.2015.12.228 ↗
56. A Novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing10.1016/j.jmatprotec.2011.04.015 ↗
57. Surface chemical states, electrical and carrier transport properties of Au/ ZrO2/n-GaN MIS junction with a high-k ZrO2 as an insulating layer10.1016/j.mseb.2018.10.006 ↗
58. Surface composites by friction stir processing: a review10.1016/j.jmatprotec.2015.04.019 ↗
59. Highly UV sensitive polycrystalline zinc selenide thin film grown by chemical bath deposition technique10.1016/j.mseb.2018.11.021 ↗
60. An improved model of porosity formation during pulsed GTA welding of aluminum alloys10.1016/j.mseb.2018.11.012 ↗
61. Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing10.1016/j.msea.2012.06.066 ↗
62. Mechanical behavior of A-Al2O3-coated SiC particle reinforced nickel matrix composites10.1016/j.jallcom.2013.03.125 ↗
63. Influence of friction stir processed parameters on superplasticity of Al-Zn-Mg-Cu alloy10.1080/10426914.2015.1103868 ↗
64. The effect of vacuum suction casting on the microstructure and corrosion behavior of aluminium alloy
65. Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying10.1016/j.mseb.2019.02.002 ↗
66. Domain evolution and corresponding piezoelectricity of lead-free In2O3-doped K0.5Na0.5NbO3 ceramics together with improved fatigue resistance and temperature stability10.1016/j.mseb.2019.04.010 ↗
67. Effect of the synthesis conditions on the properties of Co embedded porous Si nanostructures10.1016/j.mseb.2019.04.008 ↗
68. Fabrication of metal matrix composites by friction stir processing with different particles and processing parameters10.1016/j.msea.2014.12.077 ↗
69. Microstructure, mechanical and corrosion behavior of high strength aa7075 aluminium alloy friction stir welds effect of post weld heat treatment10.1016/j.dt.2015.04.003 ↗
70. Microstructural evolution and mechanical properties of ZrB2/6061Al nanocomposites processed by multi-pass friction stir processing10.1016/j.msea.2017.02.083 ↗
71. Microstructural, mechanical and tribological behavior of aluminum nitride reinforced copper surface composites fabricated through friction stir processing route10.1016/j.msea.2017.02.010 ↗
72. Formation of C/SiC multilayer coating on Si-Ti-C-O fiber10.1016/S0921-5107(00)00536-5 ↗
73. Improved structural and magnetic properties of polypyrrole substituted spinel ferrites composites10.1016/j.mseb.2019.04.022 ↗
74. Electrochemical and in Vitro behavior of the nano sized composites of Ti-6Al-4V and TiO2 fabricated by friction stir process10.1016/j.apsusc.2017.06.141 ↗
75. Fabrication of TiCp/Ti–6Al–4V surface composite via friction stir processing (FSP): process optimization, particle dispersion-refinement behavior and hardening mechanism10.1016/j.msea.2013.03.019 ↗
76. Influence of friction stir processing on microstructure and tensile behavior of AA6061/Al3Zr cast aluminum matrix composites10.1016/j.jmapro.2018.12.039 ↗
77. Reactive mechanism and mechanical properties of in situ hybrid nano composites fabricated from an Al-Fe2O3 system by friction stir processing10.1016/j.matchar.2017.03.007 ↗
78. The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing10.1016/j.apsusc.2016.10.156 ↗
79. Eutectic Al-Si piston alloy surface transformed to modified hypereutectic alloy via FSP10.1016/j.msea.2011.12.008 ↗
80. Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing10.1016/j.matdes.2011.09.035 ↗
81. The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP10.1016/j.msea.2012.08.084 ↗
82. Thermal environment and strain energy related micromodel for properties of carbon nanotubes10.1016/j.mseb.2019.05.001 ↗
83. Enhancement of bronze alloy surface properties by FSP second phase particle incorporation10.1016/j.wear.2017.01.059 ↗
84. Mechanical properties, corrosion resistance, and microstructural changes during friction stir processing of 5083 aluminum rolled plates10.1080/10426914.2011.593243 ↗
85. Synthesis, characterization and electrical properties of Na6M(SO4)4 (M = Co, Ni, Cu) vanthoffite materials10.1016/j.mseb.2019.04.024 ↗
86. Multiferroicity in Mg-doped ZnO nanoparticles10.1016/j.mseb.2019.05.008 ↗
87. Friction and wear performance of copper-graphite surface composites fabricated by friction stir processing (FSP)10.1016/j.wear.2013.04.023 ↗
88. Development of eglin steel-a new, ultrahigh-strength steel for armament and aerospace applications
89. Passive and electrochemical response of friction stir processed pure titanium10.1016/j.jallcom.2017.02.095 ↗
90. Effects of processing parameters on the microstructures and mechanical properties of in situ (Al3Ti+Al2O3)/Al composites fabricated by hot pressing and subsequent friction-stir processing10.1007/s11661-014-2221-5 ↗
91. Surface modifications of hydro turbine steel using friction stir processing10.1016/j.apsusc.2013.01.006 ↗
92. Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel10.1016/j.matdes.2014.10.082 ↗
93. Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route10.1016/j.matdes.2011.04.048 ↗
94. Effect of processing parameters on fabrication of Al-Mg/Cu composites via friction stir processing10.1016/j.matdes.2012.02.042 ↗
95. In situ synthesizing Al3Ni for fabrication of intermetallic reinforced aluminium alloy composites by friction stir processing10.1016/j.msea.2012.04.070 ↗
96. Influence of process parameters and temperature on the solid state fabrication of multilayered graphene aluminium surface nanocomposites10.1016/j.jmapro.2018.06.042 ↗
97. Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminium alloys10.1016/j.matdes.2012.03.027 ↗
98. Review: friction stir welding tools10.1179/1362171811Y.0000000023 ↗
99. Fabrication of Mg-ZrO2 surface layer composites by friction stir processing10.1016/j.jmatprotec.2015.09.047 ↗
100. In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing10.1016/j.msea.2012.04.070 ↗