journal article·2022-09

Synthesis of La2O3-Cr2O3-SrO nanocomposite by pyrolysis of metal carboxylates; its characterization, DFT studies and significance in humidity sensing

Samiksha Sikarwar, Anwesh Pandey, Ajeet Singh, B.C. Yadav, I.E. Uflyand, G.I. Dzhardimalieva

Publisher page

Abstract

This article informs the synthesis of La 2O 3-Cr 2O 3-SrO nanocomposite by pyrolysis of metal carboxylates as precursors. Various characterization techniques have been used to investigate the morphological, structural, and optical properties in detail. This investigation reveals that the proposed material can be a promising candidate for sensing applications due to its highly porous morphology, very small particle size, and excellent sensitivity. Subsequently, a well-developed film was employed as a humidity sensor considering both the electrical and optical principles. The average sensitivities were observed as 9.369 MΩ/%RH and 3.604 µW/%RH for one-layered films in case of electrical mode and optical mode respectively with response/recovery times as 15/56 s for the entire range of %RH. The sensing results were found ∼ 95.71% reproducible. Also, DFT studies were performed to confirm the material’s potency. The exceptional performance of the reported sensor is accredited to the strong hydrophilicity and highly porous morphology.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electronic and Structural Properties of Oxides · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Materials for solid oxide fuel cells10.1021/cm902640j ↗
2. Synthesis and Performance of Y-Doped La0.7Sr0.3CrO3 as a Potential Anode Material for Solid Oxygen Fuel Cells10.1016/j.apsusc.2010.09.036 ↗
3. Structural characterization of nanocrystalline La1−x SrxCrO3 thick films for H2S gas sensors10.4236/jst.2012.21003 ↗
4. Thermolysis of metallopolymers and their precursors as a method for the preparation of nanocomposites10.1070/RC2011v080n03ABEH004079 ↗
5. Pomogailo · 2000
6. Randhawa · Hyperfine Interact. · 2009 · 95 · 188
7. Stability and band offsets of nitrogenated high-dielectric-constant gate oxides10.1063/1.1638896 ↗
8. NIOSH Pocket Guide to Chemical Hazards #0141“.National Institute for Occupational Safety and Health(NIOSH).
9. Strontium OxideAmerican Elements. Access: April 29, 2016. Unknown Author.
10. Opto-electronic Humidity Sensor: A Review10.1016/j.sna.2015.05.007 ↗
11. Fiber optic humidity sensor based on the graphene oxide/PVA composite film10.1016/j.optcom.2016.04.030 ↗
12. Optical relative humidity sensor based on a polyvinyl alcohol film and a phase-enhancement total-internal-reflection heterodyne interferometer10.1016/j.sna.2020.112412 ↗
13. Synthesis and characterization of copper (II) nitrate polyacrylamide & its application as opto-electronic humidity sensor10.1016/j.sna.2017.07.006 ↗
14. Fabrication of nanostructured yttria stabilized zirconia multilayered films and their optical humidity sensing capabilities based on transmission10.1016/j.snb.2016.03.080 ↗
15. Synthesis and characterization of highly porous hexagonal shaped CeO2-Gd2O3-CoO nanocomposite and its opto-electronic humidity sensing10.1016/j.apsusc.2019.02.108 ↗
16. Nanostructured spherical-shaped Sc(III) Polyacrylate for monitoring the moisture level10.1109/JSEN.2018.2823383 ↗
17. Synthesis and characterization of nanostructured MnO2-CoO and its relevance as opto-electronic humidity sensing device10.1039/C8RA01975D ↗
18. Fabrication of tin substituted nickel ferrite (Sn-NiFe2O4) thin film and its application as opto-electronic humidity sensor10.1016/j.sna.2018.01.059 ↗
19. Humidity sensing elements based on cerium doped titania-silica thin films prepared via a sol-gel method10.1016/j.snb.2014.12.119 ↗
20. Shripal, frontal polymerization synthesis of scandium polyacrylamide nanomaterial and its application in humidity testing10.1007/s00396-021-04924-4 ↗
21. McGhee · ACS Appl. Electronic Mater. · 2020 · 2 · 359310.1021/acsaelm.0c00660 ↗
22. Polymer single-Nanowire optical sensors10.1021/nl8012314 ↗
23. An optical fiber humidity sensor based on femtosecond laser micromachining Fabry-Perot cavity with composite film10.1016/j.optlastec.2022.107949 ↗
24. An optical humidity sensor: a compact photonic chip integrated with artificial opal10.1016/j.snb.2021.130763 ↗
25. A flexible humidity sensor based on self-supported polymer film10.1016/j.snb.2022.131438 ↗
26. A humidity sensor based on ionic liquid modified metal organic frameworks for low humidity detection10.1016/j.snb.2021.131136 ↗
27. Relative humidity sensor based on cascaded Fabry-Perot interferometers and Vernier effect10.1016/j.ijleo.2022.168605 ↗
28. In-fiber humidity sensor based on Black Phosphorus-Polyvinyl alcohol10.1016/j.yofte.2021.102782 ↗
29. High sensitivity FBG humidity sensor coated with graphene and polyimide films10.1016/j.yofte.2021.102635 ↗
30. CuO nanostructure-based flexible humidity sensors fabricated on PET substrates by spin-spray method10.1016/j.apsusc.2021.151352 ↗
31. A real-time response relative humidity sensor based on a loop microfiber coated with polyvinyl alcohol film10.1016/j.measurement.2021.110359 ↗
32. Fabrication and characterization of chitosan-CeO2-CdO nanocomposite based impedimetric humidity sensors10.1016/j.ijbiomac.2021.11.079 ↗
33. Frisch · 09, Revision E.01 · 2009